ProCom brings you all the look and features of the high-end log lines with unsurpassed quality and unbeatable value. We cast our logs in concrete from real wood for amazing detail and we manufacture all of our own pilots and burners for quality assurance and safety. ProCom designs all its gas logs to the highest standards for innovation and technology.
- 1 Year limited warranty
- Minimum vent-free firebox dimensions required 13 in. H x 23 in. W x 13 in. D
- Fits most 32 in. vent-free fireboxs
- Some assembly required
- 2 gas options
- 30,000 BTU's
- Heats up to 700 sq. ft.
- ODS (oxygen depletion sensor) included with automatic shut-off and internal non-adjustable regulator to prevent over firing
- No electricity required
- Thermostat control allows you to maintain desired room temperature
- 7 hand painted concrete logs provide natural look
- Must be installed in a masonry or agency approved firebox
- Battery assisted piezo ignition
- Flow (GPH) - 9,000
- Max. PSI - 44
- Engine - Briggs & Stratton
- Engine Type - OHV
- Engine Displacement (cc) - 127
- Engine Speed (RPM) - 3,600
- Suction Port (in.) - 2
- Discharge Port (in.) - 2
- Max. Suction Lift (ft.) - 25
- Max. Total Head (ft.) - 100
- Self-Priming - Yes
- Solid Handling (in.) - 1/8
- Pump Housing - Glass-filled polyester
- Check Valve - EPDM rubber
- Seals - EPDM
- Impellers - Glass-filled polyester
- Volute - Glass-filled polyester
- Max. Fluid Temp. (deg.) - 200
- Start Type - Recoil
- Fuel Capacity (gal.) - 0.52
- Run Time - 45min. - 1hr.
- Low Oil Shutdown - No
- Dimensions L x W x H (in.) - 21 x 17 x 15
- Manufacturer Warranty - NTE 1 year RA/Exchange Policy
- hip Weight - 44.0 lbs
Wayne cast iron lawn sprinkler pump is built to give you many years of dependable pumping service. Designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling, or any other applications where high water volume is needed. Can be used as a portable sprinkler or water transfer pump. Pump should be installed in a basement, garage, tool shed or pump house.
- Continuous duty pump has single stage motor
- Self-priming pump
- Dual voltage available (115/230), factory wired for 230V with easy conversion switch
- High-efficiency square flange motor is thermally protected to prevent overheating
- Rugged cast iron pump housing
- Stainless steel shaft for durability
- Can supports up to 8-10 sprinkler heads at 100ft.
- Glass reinforced thermoplastic impeller and diffuser for corrosion-resistance
- Ceramic/carbon-faced seal for long life
- Easy access drain port
- Heavy-duty cast iron mounting brackets
- Motor Speed: 3450 RPM
- UL and CSA listed
- 30,000 BTU per hour
- Heats up to 1000 sq. ft
- Includes factory installed blower fan and thermostat
- If you are planning to use the fan you must locate the heater near an electrical outlet. The fan does require electricity if you want to use it.
- Battery operated electronic ignition
- Easy to read room temperature display
- 23.5" w x 24"h x 8" d
- Some states prohibit the use of unvented heaters. Check local regulations. Cannot be sold in California.
The only UL Listed Heat Reclaimer on the market, the Magic Heat will reclaim up to 30% of lost heat from your heating appliance and distribute it into your home. Designed for use with all types of gas heating equipment with inside flue temperatures exceeding 350º, skin temperatures of 250º.
- Fits 6 inch, 7 inch and 8 inch flue diameter crimp up configuration
- Plugs into any Standard 110V household outlet
- BTU output variable: 8,000 minimum / 30,000 maximum
- Thermostat Control Mode: On at 120 degrees / Off at 90 degrees / Run continuously
- Built in soot scraper allows user to maximize heat transfer
- Made in the USA!
Specifications Manufacturer # Length Width Height MH-6G 10.625 Inches 14.25 Inches 18.25 Inches MH-7G 10.625 Inches 14.25 Inches 18.25 Inches MH-8G 10.625 Inches 14.25 Inches 18.25 Inches
Dee Zee Nerf Steps - A tubular side step for your vehicle. Constructed of polished Stainless Steel. 4" oval design provides a larger stepping surface. Molded plastic step pads provide non-skid stepping areas. Hidden but sturdy bracing and hardware is coated to help prevent rust and keep your tubes strong. Custom Fit - no drilling required.
- 4" Oval Tube Steps
- Polished Stainless Steel Finish
- Molded Plastic Step Pads
- Powder Coated Steel Braces
- 90 Degree Bends Hide Braces
- Custom Fit Application Ensures Quick And Easy Installation
- No Drilling Required For Installation
- Three-Year Warranty
Traditional, gable-roof styling combines with Arrow design and engineering features to make the Hamlet tops in economical outdoor storage. The Hamlet makes it easy to store and organize anything, from lawn and garden equipment to pool supplies and bicycles.
- Best value storage solution
- Easy to assemble
- Sturdy electro-galvanized steel
- Floor kit sold separately.
Specifications Model Number HM86 Nominal Size 8' x 6' Storage Area 43 sq. ft. Interior Dimensions 94 3/4" W x 66" D x 66 5/8" H Wall Height 60" Door Opening 43 1/2" W x 58" H Foundation Size 97 1/2" W x 68 3/4" D
The tool of choice for Extrication, Heavy Rescue, Forcible Entry, RIT/RIC, procedures as well as Stabilization and Shoring. Firefighter-designed, the First Responder Jack is constructed of steel, cast iron, and high-strength aluminum, and available in 36", 48", and 60" sizes. It offers up to 4660 lb. of leveraging, lifting, and winching options.
No other rescue tool is as easy to use, dependable, visible, and versatile -- giving it unlimited potential at a fraction of the cost of other expensive rescue tools. The First Responder Jack offers the same spreading and ramming options used in extrication as the expensive hydraulic tools at a fraction of the cost. It requires no fuel or power, which makes it ideal for remote access with limited resources, and USAR applications in all types of disasters. From being first on-scene at a rural accident to deploying RIT for a firefighter down during a structure fire, or searching for victims at the largest of incidents, there is no tool in the fires service that offers more versatility than the First Responder Jack.
- Removable top clamp-clevis attachment is rated to the full capacity of the jack for winching, clamping and spreading.
- Durable powder-coated bright yellow main components with fire red actuating pieces.
- Safe Use Information including rated load details and operating instructions.
- Aggressive 36 sq. inch base provides a safe and effective platform, while offering a wide array of rescue options that encompass; cribbing, chains, straps, and has a 360 degree pinnable rotation platform.
- Luminescent features for use in IDLH and low light atmospheres.
Specifications Size 48" 122 cm Min. Lift Height 6.75" 17.14 cm Max. Light Height 38.63" 98.12 cm Overall Height 50.75" 128.91 cm Width 5" 12.7 cm Depth 9.63" 24.46 cm Rated Load (RL) 4660 lbs 2113 kg Tested Load (TL) 7000 lbs 3175 kg Winching Capacity 7000 lbs 3175 kg Clamping Capacity 7000 lbs 3175 kg Weight 30.2 lbs 13.70 kg
Dee Zee Black FX Running Boards - Molded styling adds protection and a sleek step to your vehicle. Black powder coated aluminum, provides these boards with non-rusting strength. Rounded outside edges and molded plastic flaps, blend into the contours of your vehicle. Cushioned step pads provide secure footing. Sturdy bracing and hardware is coated to help prevent rust and keep boards strong. Bed Section Only (matching cab section available). Custom Fit - some drilling may be required.
- FX Black Side Box Boards
- Completes Full-Length Look With Convenient Access To The Truck Bed
- Lightweight Extruded Aluminum
- Protective Gloss Black Powder Coat Finish
- Step Pad Provides Secure Footing
- Custom Fit Application Ensures Quick And Easy Installation
- Cab Board Not Included
- Made In USA
- Limited-Lifetime Warranty