This pipe is made from galvanized steel and designed for appliances that are tested and listed for use with a 2100 degree Fahrenheit HT chimney system such as wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters or other appliances fueled by wood, oil, coal or gas. Outside diameter approximately 10". This Chimney Pipe Section is one of many top quality items in our Insulated Stove Pipe department.Learn More
Save money and protect your most priceless possessions with the Wayne SPV500 Pedestal Sump Pump. By installing a pedestal sump pump above ground, you can save yourself thousands of dollars in repairs and hours of grueling labor. Avoid having to tear apart your entire basement floor to fix a minor problem. Make a wise investment and protect the value of your home with the Wayne SPV500 Pedestal Sump Pump.
- Thermoplastic construction
- Adjustable vertical float switch
- Heavy duty motor thermally protected and air cooled
- Top suction screen filters debris
- High capacity discharge
- Two pole float switch provides positive on / off action
The Keypad Mounting Post is designed to mount the Mighty Mule and GTO/PRO Keypads and Intercom/Keypads, as well as other access control devices for your gate automation system. The mounting post is a rust-proof, extruded aluminum construction with a black anodized finish. The post can be surface-mounted or sunk into concrete. Its modular design makes it easy to install and the mounting post can be set to almost any height, depending on the slope of your driveway and the type of vehicle that will be passing through your gate. The Mighty Mule Keypad Mounting Post is a great addition to any property entrance.Learn More
To protect your stored items, you should consider having a floor above the base in your shed. If you are creating your own base, we recommend that you install a floor using an Arrow floor frame kit. If you are using our base kit, your floor is installed directly on the base kit and you do not need a separate floor kit (although you could consider it). An Arrow floor frame kit offers an easy way to construct a raised floor. This is especially useful if your base is dirt, gravel or grass. The Arrow floor frame kit is installed after your shed is completely assembled. The floor beams slot easily into the frame of your shed, providing an ideal framework for finishing with 5/8" exterior-grade plywood.
The Arrow floor frame kit:
- Fits Arrow shed sizes 5' x 4' and 6' x 5'
- Assembles in minutes
- Keeps stored items off the ground
- Has frames made of strong, hot-dipped galvanized steel
- Does not include plywood (Use 5/8” exterior-grade plywood, measured to floor frame dimensions)
Blower for ProCom DF stoves EDP200 and FBD400 fireplaces. Thermostatically controlled. Works with ProCom product only.
- Will help circulate heat 75% better
- 1 year limited warranty
- For use with models QD250T, EDP200T2-JA, EDP200T2-MO, FBD400RTCC-M-HC, FBD400RTCC-M-MO, FBD400TCC-M-HC, FBD400TCC-M-MO, PCSD25T, and PCSD25RT
- Some assembly required
Designed for larger areas up to 400 square feet, the AP400W captures over 99% of particles as small as 0.3 microns in the air that passes through it. Once air is drawn into the air purifier, it goes through Luma Comfort’s comprehensive 5-step PureClean purification process.
- Coverage Area: Up to 400 square feet
- Purification Methods: HEPA filter, carbon pre-filter, UV light, TiO2 filter and VOC filter
- 5 1/2" to 19 1/2" Lifting Range
- Pro-Lift Hydraulic Garage Jacks meet or exceed ANSI / PALD Standards
- Heavy-duty reinforced steel construction provides long term durability
- Patented bypass system provides over-pumping protection
- Built-in safety valve provides overload protection
- Wide stance frame for better stability
- Twist gear release mechanism
- Swivel saddle and swivel rear casters provide easy positioning and safety