If your Arrow storage building has sliding doors, use our tune-up kit to keep them functioning smoothly.
- Fits all Arrow sliding door storage buildings
- Four lower door guides
- Four door slides
- Two door handles
- Four #10B x 1/2" screws
- Eight #8-32 3/8" machine screws
- Eight #8-32 hex nuts
- Instructions (no manual)
- Designed for use as a guide on large, sliding doors
- Mounts to concrete floor or apron
- Offers heavy-duty stay roller and 3/8" x 4-1/2" lag screw with expansion shield
- A Bracket Designed For Shelving In Dining, Living, Recreation Rooms, Etc.
- By Adding #153 Swivel Hook, These Brackets Convert To Hangers.
- Sturdy Ornamental Bracket Hangers Are For Hanging Planters, Baskets, Etc.
- Size: 10" x 7"
- For doors and gates swinging in or out
- Easy operating, handle serves as a pull
- Latches right or left
- May be padlocked
- Satin black finish
- Dimensions: 6 1/8" W x 3 1/2" H
- Designed for axles on wagons, carts, etc. and other DIY projects.
- This product can be drilled, cut, heated, shaped, etc.
- Corrosion-resistant zinc-plated.
- Size: 3/4" x 36"
This indoor window kit contains everything you need to insulate five standard 3-by-5-foot windows. The kit contains one sheet of 62-by-210-inch crystal clear plastic film, one roll of 1/2-by-1080-inch double-sided tape and six alcohol surface wipes. Once taped to the window frame, the crystal clear film heat shrinks with a blow dryer to seal out drafts and cold. For indoor use on painted or varnished wood, aluminum and vinyl surfaces only.Learn More
- For use with chain
- Boxed loose
- Zinc plated
- Designed for connecting chain to rings end links hook pad eyes and other fittings
- Most Often Found As Connecting Link In Agricultural Or Logging Industry
- Do no use for overhead lifting, support of human weight, athletic or playground equipment
- When safety is involved, consult manufacturer
- Inspect frequently
- Load Rating: 9200 lbs.
- Size: 1/2"
- Designed For Use On Heavy Wood Gates & Doors, Double Doors & Driveway Wood Gates
- Cane Bolt Anchors 1 Gate While The Gate Latch Acts As A Stop For The Other Gate
- Can be held in open & closed positions
- Made of Steel
- Zinc Plated Finish
- Size: 1/2" x 18"
- Plated steel.
- High corrosion-resistant galvanized finish.
- Can be used in construction and other repair applications where a strong support is needed.
- 90° angle.
- Can be drilled to meet a variety of applications.
- Dimensions: 1" W x 48" L