AL2245 Campbell Hausfeld's high quality tips bases, spray guns and painting equipment will help you get your painting job done right. This quadraflow tip base is designed with a solvent resistant seal set for use in all coatings. For tip bases that are more accurate and efficient use Campbell Hausfeld. Specifications: -7/8'' Female gun fitting -For use with 7/8'' male tip connection -Compatible with other manufacturers tip bases excluding Graco, Rac-X and ASM Super Zip Specifications: -Weight: 1.50 lbs. -Warranty: 90 day limited -Dimensions: 4.62'' H x 1.75'' W x 2.81'' DLearn More
Paint strainer for use with 1 quart canisters with a minimum 3-1/4 inch diameter opening
- Wide opening for easy pouring
- Use one hand to pour and strain paint into quart canisters
- Straining is recommended for all coatings for best performance in any type of paint spray gun
Turbine Filter for CH HVLP models beginning with HV2 - not for use on HV2500 series
- Use on CH HVLP turbines that have a filter housing attached with a thumbscrew
- Replace filter when clogged using solvent based coatings
- Replace filter when it deteriorates from repeated cleaning with water based coatings
- Proper filter maintenance significantly improves turbine life and performance.
Turbine HVLP needle kit for enamels and some latex paints
- Use only on CH HVLP turbine spray guns with round logo embossed in handle
- Appropriate for use with all but very light or very heavy coatings
Pack of 2 turbine filters for CH HVLP models beginning with HV25 and HV3
- Replace when filter begins to deteriorate from frequent cleaning
- Cleaning with warm soapy water recommended only when using water based coatings
- Always replace when clogged if using solvent based coatings
- Proper filter maintenance significantly improves turbine life and performance
Nap Replacement Paint Roller Cover - Nap 3/4 Inch - Medium to Rough Surfaces
- Roller cover compatible with any automatic feed roller or airless roller attachment
- Suitable for use with any coating
- 9 inch wide roller with plastic core
Metal spray gun with 4-in long 100 mesh filter and 413 (.013in) Quadraflow spray tip delivering a 8 inch wide spray pattern through a .013 inch orifice. Excellent for spraying latex, oil-based paints and stains.
- 7/8 inch G-Thread tip fitting accepts most manufacturer`s gun accessories
- Durable alloy construction resists solvent
- Ergonomic design with in-handle filter location
- Length: 8"
- Width: 9.5"
- Height: 2.4"
- Standard Airless Spray Gun - AL2150
- Sprayer and selected tips/filters are designed for the type of paints most often used for barn and fence
- Powerful 1 HP induction motor for difficult to spray coatings
- Two 50-ft high pressure hoses, plus a 5-ft whip hose allow for 105-ft of extended pressure hose reach
- 5-ft whip hose and swivel fitting connects to gun for improved flexibility and ease of gun orientation
- Professional spray gun with spare 50 mesh filter
- 415 spray tip minimizes overspray and waste; perfect for Post, Rails, and Crossbuck boards
- 517 spray tip maximizes flow and spray pattern
- Large pneumatic tires for ease of movement on rough, uneven terrain
- 0.44 GPM Airless Sprayer - PS290D
- (1) Spray Gun with 0.19-in and 0.15-in Tips
- (2) 50-ft High Pressure Hoses
- 5-ft Whip Hose
The Campbell Hausfeld Quadraflow spray tip delivers a precise spray pattern and provides less clogging and overspray than most other spray tips. U.S.A.
- .017in. tip
- Designed to deliver a precise spray pattern
- Provides less clogging and overspray than most other spray tips
- Compatible with other manufacturer tip bases (excluding Graco, Rac-X and ASM Super Zip)
5 foot Airless Whip Hose for use with any floor mounted airless sprayer in conjunction with standard high pressure hose.
- More flexible than standard airless hose for reduced arm fatigue
- Swivel connection for improved mobility
- Can be used with any airless sprayer by any manufacturer.