Campbell Hausfeld mesh filters are used with Campbell Hausfeld airless spray guns. U.S.A.
- Use with Campbell Hausfeld airless spray guns
- Critical internal components are constructed from corrosion and wear-resistant materials provide long-life wear
- Single lever-action allows the unit to prime, then with a simple flip of the lever, you are ready to paint
- Interchangeable spray tips and pressure adjustment knob allow for tuning spray pattern and paint volume to match the project
- 25-ft hose gives the ability to paint an average room yet it is compact and light-weight to move from room-to-room with ease
- Sprays oil and water-based paints; stains and sealers from 1 or 5 gallon buckets
- 0.24 GPM Airless Sprayer - PS120B
- (1) Spray Gun with 0.015-in Tip
- 25-ft High Pressure Airless Hose
- Stand Unit
25 ft Airless High Pressure Hose with 1/4 inch swivel fittings and hose coupling connector.
- 1/4 inch NPSM swivel fittings on each end
- Hose connector included
- Use as a replacement for a worn or damaged hose, or to extend the reach of an airless paint sprayer
- Compatible with any floor mounted airless sprayer with a 1/4 inch hose fitting.
Paint strainer for use with 1 quart canisters with a minimum 3-1/4 inch diameter opening
- Wide opening for easy pouring
- Use one hand to pour and strain paint into quart canisters
- Straining is recommended for all coatings for best performance in any type of paint spray gun
Campbell Hausfeld mesh filters are used with Campbell Hausfeld airless spray guns. U.S.A
- Use with Campbell Hausfeld airless spray guns
Metal spray gun with 4-in long 100 mesh filter and 413 (.013in) Quadraflow spray tip delivering a 8 inch wide spray pattern through a .013 inch orifice. Excellent for spraying latex, oil-based paints and stains.
- 7/8 inch G-Thread tip fitting accepts most manufacturer`s gun accessories
- Durable alloy construction resists solvent
- Ergonomic design with in-handle filter location
- Length: 8"
- Width: 9.5"
- Height: 2.4"
- Standard Airless Spray Gun - AL2150
This 25' Hose from Campbell Hausfeld is great for when you need to replace an old or damaged hose or to add and extend the distance between your turbine and work area. Its connects are standard garden hose fittings for direct attachment to turbine or male and female quick connects and is coil reinforced for protections against wear. The hose is a 25' HVLP turbine air hose, quick connects are not included. There is a 90 day limited warranty on this hose.
- Connections are standard garden hose fittings for direct attachment to turbine or male and female quick connects
- Coil reinforced for protection against wear
- You can add this to an existing work area and extend the distance between the turbine and work area
- 25' ID HVLP turbine air hose
- Weight: 4 lbs.
- Warranty: 90 day limited
This 8 PSI High Volume/Low Pressure Paint System is perfect for finishing and all types of professional painting applications. With a professional spray gun, high performance 4 stage motor, durable metal housing, and accessory kit, this unit truly satisfies all of the professional needs of a serious painter.
- 8 PSI, 85 CFM - perfect for commercial jobs
- 4-stage Ametek Turbine - 50% less over spray than conventional (non-HVLP) spray guns
- Quick indexing air cap adjusts pattern to round vertical and horizontal shapes on the fly
- Material flow adjusts to spray a variety of coatings
- Sprays solvent-based, water-borne and specialty coatings
- In-line check valve
- Commercial grade filtering system reduces contaminants in the air flow
- Quick connect hose fittings to gun and turbine
- 34-ft flexible air hose
- 4-Turbine High Volume / Low Pressure
- Painter - HV2100
- 34-ft Heavy Duty Air Hose
- Professional Spray Gun
- Gun Wrench
- Viscosity Stick
- Cleaning Brush
AL2235 Campbell Hausfeld's high quality tips bases, spray guns and painting equipment will help you get your painting job done right. This quadraflow tip base is designed with a solvent resistant seal set for use in all coatings. For tip bases that are more accurate and efficient use Campbell Hausfeld. Features: -11/16'' female gun fitting -For use with 11/16'' male tip connection -Compatible with other manufacturers tip bases excluding Graco, Rac-X and ASM Super Zip Specifications: -Weight: 1.50 lbs. -Warranty: 90 day limited -Dimensions: 4.62'' H x 1.75'' W x 2.81'' DLearn More
This 5 PSI High Volume/Low Pressure Paint System is perfect for finishing all types of semi-professional painting applications.
- 6 PSI and 65 CFM is perfect for commercial jobs
- Two large filters to prolong unit life
- Heat dissipating stub hose
- Adjustable spray gun controls to create fine finishes
- Easy pattern shape adjusts to round vertical and horizontal shapes
- Sprays most finish coatings: lacquers, clear coats, varnishes, enamels, water-borne coatings, stains, and oil-based paints
- 3-Turbine High Volume / Low Pressure
- Painter - HV3000
- 25-ft Heavy Duty Air Hose
- Semi-Professional Spray Gun
- (1) Wrench
- (1) Cleaning Brush
- (1) Viscosity Stick
- (2) Disposable Stainer Cones
- (1) Needle/Nozzle