Motor Type: 12 VDC permanent magnet, thermally protected, splashproof
2200-1: 18 AWG, 9” long
2200-2/2200-3: 18 AWG, 4.5” long with 2-pin connector
Duty Cycle: Intermittent
Materials of Construction
Motor Housing: Nylon 6/6
Pump Housing: Polypropylene
Fasteners: Stainless steel and zinc plated
Type: 2 chamber positive displacement diaphragm pump, self priming, capable of being run dry
Max Recommended Temperature: 110°F (43°C)
4 feet (1.2 m) suction lift
Max Pressure: 40 PSI (2.8 bar)
Pressure Demand Switch:
Shut-Off: 40 ±5 PSI (2.8 ±0.3 bar) factory setting
Turn-On: 25 ±5 PSI (1.7 ±0.3 bar)
Inlet/Outlet Ports: 3⁄8” hose barb
Weight: 1.25 lbs (.57 kg)Learn More
- CPVC fittings for hot and cold water supply systems
- Lightweight, non-conducting, non-corrosive
- High insulative value reduces sweating
- CPVC fittings are rated at 400 psi at 73 degrees or 100 psi at 180 degrees Fahrenheit
- Meets ASTM standard D-2846
- Size: 1/2"
- For 150 lbs maximum working steam pressure or 300 lbs non-shock working oil, water or gas pressure at ordinary air temperature
- Straight sizes
- Galvanizing meets ASTM A-123 - hot dip process
- Tapped to American standard oil thread
- Hydrostatic tested
- Protected from corrosion with varnish
- Do not use for drinking water
- Length: 1.5"
- Width: 2.25"
- Height: 2"