McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

WIN A $200 GIFT CERTIFICATE

Enter the contest by signing up for our newsletter

FREE SHIPPING*

ON ORDER $99+

View Details

Plumbing

Plumbing

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Hypro Hydraulic Centrifugal Pump 9303C-HM4C

    Hypro Hydraulic Centrifugal Pump 9303C-HM4C

    $529.99

    Hypro Series 9300 hydraulic motor-driven centrifugal pumps provide smooth performance. They can be conveniently mounted on the tractor or sprayer, becoming part of the vehicle’s hydraulic system and freeing the PTO for other uses. The Hypro “close-coupled” design reduces the mounting space required, eliminating long shafts and couplers between the pump and motor.

    • Max. Flow 115 gpm/435 lpm
    • Max Pressure 93 psi/6.4 bar
    • Motor capacity 6-9 gpm/34-38 lpm
    • Hydraulic motor drive (for open and closed center systems)
    • Housing: cast iron or stainless steel
    • Port sizes: 1 1⁄2" NPT inlet, 1 1⁄4" NPT outlet
    • Impeller: Cast Iron models – glass-filled nylon; Stainless Steel models – polypropylene
    • Pump seals: Cast Iron models – Viton/ceramic are standard; Stainless Steel models – Life Guard™ silicon carbide
    • Hydraulic ports: 1⁄2" NPT
    Learn More
  2. BE Pressure Supply 3" 6.5HP 264GPM Honda Trash Pump TP-3065HR

    BE Pressure Supply 3" 6.5HP 264GPM Honda Trash Pump TP-3065HR

    $534.97
    Product Features
    • 3” Trash pump (Suction Port/Discharge Port - 3")
    • EPA certified
    • 6.5hp GX200 Honda engine with Low Oil Alert
    • Discharge Capacity - 264gpm
    • 85’ total lift
    • 26’ suction lift
    • Can handle up to 1” solids
    • Max Pressure of 48 PSI
    Learn More
  3. Pacer Pumps S Series 3" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    Pacer Pumps S Series 3" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    $579.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  4. Tuthill/Sotera 400 Series Tote and Go Chemical Transfer Pump Kit 12volt 15gpm SS415BX731PG

    Tuthill/Sotera 400 Series Tote and Go Chemical Transfer Pump Kit 12volt 15gpm SS415BX731PG

    $599.97

    Product Description

    Electric Operated Drum Pump, Diaphragm, 1/4 HP, Wetted Materials Polypropylene, Fluorocarbon, SS, Santoprene, 1 Phase, 12VDC, 2600 RPM, Pump Body Material Glass Filled Polypropylene, Discharge Tubing Material EPDM, Fluorocarbon Seal, 15 GPM, Max. Head 34 Ft., Max. Pressure 15 PSI, Max. Temp. 130 F, Max. Viscosity 3000 CPS, Inlet Size 2 In, Outlet Size 1 In, Hose Length 12', Discharge Tube Outlet ID Size 1 In., Includes 3' Hoses

    Specs

    Type Diaphragm
    Item Electric Operated Drum Pump
    Voltage 12VDC
    Hz 60
    Phase 1
    HP 1/4
    RPM 2600/360cycle/min
    Motor Enclosure TENV
    Motor Type 12VDC
    Pump Body Material Glass Filled Polypropylene
    Wetted Materials Polypropylene, Fluorocarbon, SS, Santoprene
    pH Range 3.6-11.9
    Seal Material Fluorocarbon
    Gasket Material Fluorocarbon
    Discharge Tubing Material EPDM
    Hose Material EPDM
    Piston Santoprene
    For Use On Chemicals
    GPM 15
    Maximum Head 34''
    Max. Pressure 15PSI
    Max. Temp. 130oF
    Max. Viscosity 3000 CPS
    Max. GPM for Oil 12
    Max. GPM for Water 15
    Inlet Size 2"
    Outlet Size 1"
    Discharge Tube Outlet ID Size 1"
    Hose Length 12''
    Suction Tube Length 39"
    Overall Length 18"
    Metered N
    Application DEF, Solvents, Cleaners, Degreasers, Deionized Water, Caustics
    Manufacturers Warranty Length 1 Year
    Includes 3'' Hose
    Weight 32.650000
    SKUs 6XGW0
    Learn More
  5. Pacer Pumps G Series Three Phase B-Curve Electric Drive Pump 1-1/2/2BLD.75C

    Pacer Pumps G Series Three Phase B-Curve Electric Drive Pump 1-1/2/2BLD.75C

    $559.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    THREE PHASE 230/460 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL D.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL D.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL D1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL D1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL D2.0C
    Learn More
  6. Pacer Pumps S Series 2" C-Curve Single Phase Electric Drive Pump SE2CL G1.0C

    Pacer Pumps S Series 2" C-Curve Single Phase Electric Drive Pump SE2CL G1.0C

    $589.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  7. Pacer Pumps S Series 2" H-Curve 3 Phase Electric Drive Pump SE2HL D3.0C

    Pacer Pumps S Series 2" H-Curve 3 Phase Electric Drive Pump SE2HL D3.0C

    $619.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  8. Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    $1,139.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  9. Pacer Pumps G Series Three Phase E-Curve Electric Drive Pump 1-1/2/2ELD2.0C

    Pacer Pumps G Series Three Phase E-Curve Electric Drive Pump 1-1/2/2ELD2.0C

    $629.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    THREE PHASE 230/460 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL D.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL D.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL D1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL D1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL D2.0C
    Learn More
  10. Pacer Pumps S Series 2" J-Curve 3 Phase Electric Drive Pump SE2JL D5.0C

    Pacer Pumps S Series 2" J-Curve 3 Phase Electric Drive Pump SE2JL D5.0C

    $879.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More

Items 1-10 of 53

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction