Motor Type: 12 VDC permanent magnet, thermally protected, splashproof
2200-1: 18 AWG, 9” long
2200-2/2200-3: 18 AWG, 4.5” long with 2-pin connector
Duty Cycle: Intermittent
Materials of Construction
Motor Housing: Nylon 6/6
Pump Housing: Polypropylene
Fasteners: Stainless steel and zinc plated
Type: 2 chamber positive displacement diaphragm pump, self priming, capable of being run dry
Max Recommended Temperature: 110°F (43°C)
4 feet (1.2 m) suction lift
Max Pressure: 40 PSI (2.8 bar)
Pressure Demand Switch:
Shut-Off: 40 ±5 PSI (2.8 ±0.3 bar) factory setting
Turn-On: 25 ±5 PSI (1.7 ±0.3 bar)
Inlet/Outlet Ports: 3⁄8” hose barb
Weight: 1.25 lbs (.57 kg)Learn More
- Glass reinforced polypropylene.
- Heavy duty (Schedule 80).
- Lightweight with excellent strength.
- NPT threads.
- Excellent chemical resistance.
- Pressure to 150 P.S.I. at 70°F.
- Sch. 40 malleable black steel construction for durability
- Maximum working pressure of 214 psi
- Working temperature range of -29 to 400 degrees Fahrenheit
- Hydrostatically tested
- For use with residential gas, air and lp supply
- Do not use with drinking water
- Pressure tested directly at the factory
- Protected from corrosion with varnish
- Size: 1" x 120"
This pipe also has spaced slits, covered by a removable polyester sock. It’s also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is present.Learn More