McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ORDERS $149+

View Details

Water Systems

Water Systems

Items 1-10 of 60

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    $479.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  2. Pacer Pumps S Series 2" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    Pacer Pumps S Series 2" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    $579.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 2 Horsepower
    • 115/230 Volt
    • 1 Phase
    • Electric motor powered
    Learn More
  3. Pacer Pumps S Series 3" L-Curve Hydraulic Drive Pump SE3LL HYC

    Pacer Pumps S Series 3" L-Curve Hydraulic Drive Pump SE3LL HYC

    $509.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only

     

    Curve Port Size Req'd HP Weight Model
    E 1 1/2" 2 16# SE1-1/2EL HYC
    F 2" 3 16# SE2FL HYC
    H 2" 3 16# SE2HL HYC
    I 2" 5 16# SE2IL HYC
    J 2" 5 16# SE2JL HYC
    L 3" 5 16# SE3LL HYC
    Learn More
  4. Pacer Pumps G Series Single Phase A-Curve Electric Drive Pump 1-1/2/2AL C.5C

    Pacer Pumps G Series Single Phase A-Curve Electric Drive Pump 1-1/2/2AL C.5C

    $549.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    SINGLE PHASE 115/230 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL C.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL C.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL C1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL C1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL C2.0C
    Learn More
  5. Tuthill/Sotera 400 Series Tote and Go Chemical Transfer Pump Kit 12volt 15gpm SS415BX731PG

    Tuthill/Sotera 400 Series Tote and Go Chemical Transfer Pump Kit 12volt 15gpm SS415BX731PG

    $599.97

    Product Description

    Electric Operated Drum Pump, Diaphragm, 1/4 HP, Wetted Materials Polypropylene, Fluorocarbon, SS, Santoprene, 1 Phase, 12VDC, 2600 RPM, Pump Body Material Glass Filled Polypropylene, Discharge Tubing Material EPDM, Fluorocarbon Seal, 15 GPM, Max. Head 34 Ft., Max. Pressure 15 PSI, Max. Temp. 130 F, Max. Viscosity 3000 CPS, Inlet Size 2 In, Outlet Size 1 In, Hose Length 12', Discharge Tube Outlet ID Size 1 In., Includes 3' Hoses

    Specs

    Type Diaphragm
    Item Electric Operated Drum Pump
    Voltage 12VDC
    Hz 60
    Phase 1
    HP 1/4
    RPM 2600/360cycle/min
    Motor Enclosure TENV
    Motor Type 12VDC
    Pump Body Material Glass Filled Polypropylene
    Wetted Materials Polypropylene, Fluorocarbon, SS, Santoprene
    pH Range 3.6-11.9
    Seal Material Fluorocarbon
    Gasket Material Fluorocarbon
    Discharge Tubing Material EPDM
    Hose Material EPDM
    Piston Santoprene
    For Use On Chemicals
    GPM 15
    Maximum Head 34''
    Max. Pressure 15PSI
    Max. Temp. 130oF
    Max. Viscosity 3000 CPS
    Max. GPM for Oil 12
    Max. GPM for Water 15
    Inlet Size 2"
    Outlet Size 1"
    Discharge Tube Outlet ID Size 1"
    Hose Length 12''
    Suction Tube Length 39"
    Overall Length 18"
    Metered N
    Application DEF, Solvents, Cleaners, Degreasers, Deionized Water, Caustics
    Manufacturers Warranty Length 1 Year
    Includes 3'' Hose
    Weight 32.650000
    SKUs 6XGW0
    Learn More
  6. Pacer Pumps G Series Three Phase C-Curve Electric Drive Pump 1-1/2/2CLD1.0C

    Pacer Pumps G Series Three Phase C-Curve Electric Drive Pump 1-1/2/2CLD1.0C

    $569.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    THREE PHASE 230/460 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL D.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL D.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL D1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL D1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL D2.0C
    Learn More
  7. Pacer Pumps S Series 2" C-Curve 3 Phase Electric Drive Pump SE2CL H1.0C

    Pacer Pumps S Series 2" C-Curve 3 Phase Electric Drive Pump SE2CL H1.0C

    $509.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    • 1.0 HP Pump
    • 208,230/460 VAC, 1725 RPM
    • 3 Phase
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  8. Pacer Pumps S Series Cast Iron 2" I-Curve Pedestal Mounted Pump SE2IL CSS

    Pacer Pumps S Series Cast Iron 2" I-Curve Pedestal Mounted Pump SE2IL CSS

    $319.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance. Cast iron pedestal and solid 316 stainless steel shaft.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    Curve Port Size Req'd HP RPM  Weight Model
    A 1 1/2"  1/2 1750 24# SE1-1/2AL CSS
    C 2" 1 1750 24# SE2CL CSS
    E 2" 2 3450 24# SE2EL CSS
    F 2" 5 3450 24# SE2FL CSS
    H 2" 3 3450 24# SE2HL CSS
    I 2" 7.5 3450 24# SE2IL CSS
    J 2" 5 3450 24# SE2JL CSS
    L 3" 5 3450 24# SE3LL CSS
    Learn More
  9. TANK LOW PROFILE PICKUP 305 GAL

    TANK LOW PROFILE PICKUP 305 GAL

    $342.97
    [description] Learn More
  10. Pacer Pumps S Series 2" J-Curve Hydraulic Drive Pump SE2JL HYC

    Pacer Pumps S Series 2" J-Curve Hydraulic Drive Pump SE2JL HYC

    $439.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only

     

    Curve Port Size Req'd HP Weight Model
    E 1 1/2" 2 16# SE1-1/2EL HYC
    F 2" 3 16# SE2FL HYC
    H 2" 3 16# SE2HL HYC
    I 2" 5 16# SE2IL HYC
    J 2" 5 16# SE2JL HYC
    L 3" 5 16# SE3LL HYC
    Learn More

Items 1-10 of 60

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction