McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ON ORDER $99+

View Details

Water Systems

Water Systems

Items 1-10 of 206

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Du Pont String Wound Polypropylene 15 Micron Filter 2 Pack WFPFC4002

    Du Pont String Wound Polypropylene 15 Micron Filter 2 Pack WFPFC4002

    $3.49
    • Omnifilter RS5-DS String Wound cartridges are suitable for a wide variety of sediment filtration applications, including municipal and well water as well as many industrial fluids. The cartridges are wound in a precise pattern around the core providing greater surface area. The result is higher dirt-loading capacity and greater efficiency than standard wound cartridges.

      • Durable string wound construction
      • General purpose filter for whole house applications
      • Sediment reduction including sand, silt, scale particles, and rust particles
      • Ideal for well water applications
      • Fits the Omnifilter filter housings OB1, U25, and OB5.
        Filter Specifications
        Drop-In
        Sediment/Dirt/Rust
        15 µm
        OMNIFilter, Flotec
        Dimensions
        9-7/8" (25.1 cm)
        2.25"
        Operating Conditions
        5 gpm
        40 - 145 °F
        Filter Life
        15,000 Gallons
        3 months
        Materials of Construction
        Polypropylene Fiber Cord, String Wound
        DOE
    Learn More
  2. Delavan 1.0GPM 40PSI Demand Pump 2200-201

    Delavan 1.0GPM 40PSI Demand Pump 2200-201

    $29.99

    Specifications

    Motor Type: 12 VDC permanent magnet, thermally protected, splashproof

    Connection:
    2200-1: 18 AWG, 9” long
    2200-2/2200-3: 18 AWG, 4.5” long with 2-pin connector

    Duty Cycle: Intermittent

    Materials of Construction

    Motor Housing: Nylon 6/6

    Pump Housing: Polypropylene

    Valves: Viton

    Diaphragm: Santoprene

    Fasteners: Stainless steel and zinc plated

     

    Pump

    Type: 2 chamber positive displacement diaphragm pump, self priming, capable of being run dry

    Max Recommended Temperature: 110°F (43°C)

    Priming Capabilities:
    4 feet (1.2 m) suction lift

    Max Pressure: 40 PSI (2.8 bar)

    Pressure Demand Switch:
    Shut-Off: 40 ±5 PSI (2.8 ±0.3 bar) factory setting
    Turn-On: 25 ±5 PSI (1.7 ±0.3 bar)
    factory setting

    Inlet/Outlet Ports: 3⁄8” hose barb

    Weight: 1.25 lbs (.57 kg)

    Learn More
  3. Pacer Pump Series 550 2"centrifugal 3.5hp SEB2PL E4C

    Pacer Pump Series 550 2"centrifugal 3.5hp SEB2PL E4C

    $239.99
    • Flow (GPH) - 9,000
    • Max. PSI - 44
    • Engine - Briggs & Stratton
    • Engine Type - OHV
    • Engine Displacement (cc) - 127
    • Engine Speed (RPM) - 3,600
    • Suction Port (in.) - 2
    • Discharge Port (in.) - 2
    • Max. Suction Lift (ft.) - 25
    • Max. Total Head (ft.) - 100
    • Self-Priming - Yes
    • Solid Handling (in.) - 1/8
    • Pump Housing - Glass-filled polyester
    • Check Valve - EPDM rubber
    • Seals - EPDM
    • Impellers - Glass-filled polyester
    • Volute - Glass-filled polyester
    • Max. Fluid Temp. (deg.) - 200
    • Start Type - Recoil
    • Fuel Capacity (gal.) - 0.52
    • Run Time - 45min. - 1hr.
    • Low Oil Shutdown - No
    • Dimensions L x W x H (in.) - 21 x 17 x 15
    • Manufacturer Warranty - NTE 1 year RA/Exchange Policy
    • hip Weight - 44.0 lbs
    Learn More
  4. Fimco High Flo 3.8 GPM Sprayer Pump 5275088

    Fimco High Flo 3.8 GPM Sprayer Pump 5275088

    $89.97
    • 12 Volt Diaphragm Pump
    • 3.8 GPM
    • 45 psi max pressure
    • 11 Amp Draw
    • Ready for Roundup
    Learn More
  5. Wayne Thermoplastic Submersible Utility Pump - 1 1/4 in., 3000 GPH, 1/6 HP RUP160

    Wayne Thermoplastic Submersible Utility Pump - 1 1/4 in., 3000 GPH, 1/6 HP RUP160

    $49.99

    This Wayne Thermoplastic Submersible Utility Pump drains flooded basements, empties water-filled boats and removes water from stock tanks and flat roofs with its 1/6 HP motor. Features thermal-overload protection to prevent burn out. Oil-less motor design for environmentally safe operation.

    • Oil-free thermally protected high-efficiency motor
    • Impact- and corrosion-resistant housing, volute and impeller
    • Pumps within 3/8in. of the surface
    • 1 1/4in. NPT discharge port
    • 3/4in. adjustable discharge adapter connects to standard garden hose
    • Easy-access handle for complete portability
    • UL and CSA listed
    • Not designed for continuous use
    Learn More
  6. Pacer Pump 2" Inlet/outlet Body

    Pacer Pump 2" Inlet/outlet Body

    $84.99

    2" Pump Body Housing

    • 2" threaded inlet and outlet
    • made of glass reinforced polyester
    Learn More
  7. Fimco High Flo 2.1 GPM Sprayer Pump 5275087

    Fimco High Flo 2.1 GPM Sprayer Pump 5275087

    $56.97

    Demand switch models operate only when liquid flow is required. Pump and motor stop instantly when discharge is closed. Diaphragm design eliminates troublesome shaft seal. Pump can be run dry without damage. Ball bearing drive assures longer pump life. Excellent self-priming capability. Santoprene diaphragms and viton valves are standard. Maximum temperature of pumped liquid is 130°F (55°C). Permanent magnet motor and longer life brushes.

    • 12 Volt Diaphragm Pump
    • 2.1 GPM
    • 60 psi max pressure
    • 8 Amp Draw
    • Includes On/Off Switch
    • Each pump has an internal fan which cools the pump during operations by up to 50%
    • Upgraded pressure switch for longer life
    • Motor windings have been increased to help dissipate heat
    • Ready for Round-up
    Learn More
  8. Delavan 2.0GPM 60PSI Demand Pump 7812-201

    Delavan 2.0GPM 60PSI Demand Pump 7812-201

    $59.99

    Specifications

    Motor Type: 12 VDC permanent magnet, totally enclosed, non-ventilated

    Leads: 14 AWG, 12” long

    Duty Cycle: See Heat Rise graph

    Temperature Limits: Motor is not equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 150°F (66°C).(See Heat Rise graph)

    Materials of Construction

    Housings: Polypropylene

    Valves: Viton

    Diaphragm: Santoprene

    Fasteners: Stainless Steel

    Motor Shell: Coated Steel

    Pump

    Type: 3 chamber positive displacement diaphragm pump, self priming, capable of being run dry, demand or bypass mode

    Certifications: CE Approval

    Liquid Temperature: 140°F (60°C) Max.

    Priming Capabilities: 14 feet (4 m)

    Max Pressure: 60 PSI (4.4 bar)

    Inlet/Outlet Ports: 3⁄8” FNPT

    Weight: 6 lbs (2.7 kg)

    Learn More
  9. Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    $479.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  10. Wayne 1/3 HP Thermoplastic Sump Pump with Vertical Float Switch SPF33

    Wayne 1/3 HP Thermoplastic Sump Pump with Vertical Float Switch SPF33

    $99.99
    • Pumps Up To 3600 GPH @ 0'
    • Reinforced, Corrosion-Resistant Thermoplastic Submersible Sump Pump
    • Vertical Float Switch For Automatic Operation
    • Top Suction Design Filters Debris and Minimizes Clogging
    • Designed For Easy Installation Without Any Plumbing Changes
    • Float Guard Protects Switch From Hang-Ups
    • Epoxy-Coated Steel, High Performance 1/3 HP Motor
    • 1-1/2" NPT Discharge and Reinforced Thermoplastic Base
    • Designed For 11” Diameter Or Larger Sump Basins
    • Approximate On Level @ 9” - Off Level @ 4”
    Learn More

Items 1-10 of 206

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction