McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

HOLIDAY SHIPPING

DEADLINE

View Details

Pumps - Accessories

Pumps - Accessories

Items 1-10 of 73

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction
  1. Pacer Pumps S Series 2" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    Pacer Pumps S Series 2" E-Curve Single Phase Electric Drive Pump SE2EL C2.0C

    $579.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 2 Horsepower
    • 115/230 Volt
    • 1 Phase
    • Electric motor powered
    Learn More
  2. BE Pressure Supply 3" 6.5HP 264GPM Honda Trash Pump TP-3065HR

    BE Pressure Supply 3" 6.5HP 264GPM Honda Trash Pump TP-3065HR

    $534.97
    Product Features
    • 3” Trash pump (Suction Port/Discharge Port - 3")
    • EPA certified
    • 6.5hp GX200 Honda engine with Low Oil Alert
    • Discharge Capacity - 264gpm
    • 85’ total lift
    • 26’ suction lift
    • Can handle up to 1” solids
    • Max Pressure of 48 PSI
    Learn More
  3. Pacer Pumps S Series 1-1/2" A-Curve Single Phase Electric Drive Pump SE1-1/2AL G.5C

    Pacer Pumps S Series 1-1/2" A-Curve Single Phase Electric Drive Pump SE1-1/2AL G.5C

    $479.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  4. Pacer Pumps PC Series D-Curve Hydraulic Drive Pump PCE2DL HYC

    Pacer Pumps PC Series D-Curve Hydraulic Drive Pump PCE2DL HYC

    $439.97

    The PC Series pump from Pacer Pumps - for pumping, transferring or recirculating of acids, plating solutions, photographic chemicals, fume scrubber, waste water, etching and cleaning solutions. All major pump parts are precision molded of tough, corrosion resistant glass-reinforced polyester, polypropylene, Ryton or Noryl thermoplastic. These high strength plastics provide resistance to many acids, bases, solvents and salt water at temperatures as high as 200°F (93°C)

    Features:

    • Chemical resistant materials: glass reinforced Noryl, polyester, polypropylene or Ryton® construction
    • Choice of drives: gasoline engine, electric, hydraulic or pneumatic motors
    • Elastomers include your choice of Viton®, EPDM or Buna
    • Standard fasteners are stainless steel, also available with titanium or Hastelloy® C internal fasteners, shaft seal and shaft adapter and Pacer's own Polymar® non-metallic shaft seal for pumping highly corrosive liquids.
    • Available close-coupled or flexible coupled to electric motors
    • Non-metallic solution contact models available in all stock materials
    • Flow rates: to 230 GPM or 94 ft. TDH @ 60 Hz (725 LPM or 20m @ 50 Hz)
    • 1 1/2", 2" and 3" NPT threaded ports
    • 1 1/2" and 2" BSP threads available
    Close-Coupled to a hydraulic motor with a 316 stainless steel shaft adapter, and pressure gauge for adjusting RPM. 
     
    Curve Port Size Req'd HP Weight Model
    C 1-1/2" / 2" 2 12# PCE2CL HYC
    D 1-1/2" / 2" 3 12# PCE2DL HYC
    E 1-1/2" / 2" 5 12# PCE2EL HYC
    F 3" 5 13# PCE3FL HYC
    Learn More
  5. Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    $1,139.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  6. Pacer Pumps S Series 2" J-Curve 3 Phase Electric Drive Pump SE2JL D5.0C

    Pacer Pumps S Series 2" J-Curve 3 Phase Electric Drive Pump SE2JL D5.0C

    $879.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  7. Pacer Pumps S Series 2" U-Curve 5.5 Honda GX Engine Drive Pump SE2UL E5HCP

    Pacer Pumps S Series 2" U-Curve 5.5 Honda GX Engine Drive Pump SE2UL E5HCP

    $519.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only

    PACER PUMPS feature engines by Briggs & Stratton, Honda & LCT.
             
    Curve Port Size Engine Weight Model
    U 2" 205cc B&S 46# SE2UL E5ICP
    U 2" 6.5 Vanguard 57# SE2UL E6VCP
    U 2" 5.0 Honda GC 47# SE2UL E5HOC
    U 2" 5.5 Honda GX 48# SE2UL E5HCP
    R 2" 205cc B&S 46# SE2RL E5ICP
    S 3" 6.5 Vanguard 57# SE3SL E6VCP
    X 3" 8.0 Vanguard 70# SE3XL E8VCP
    Z 3" 8.0 Vanguard 70# SE3ZL E8VCP
    R 2" 5.5 (diesel) 110# SE2RL E5DLC
    X 3" 5.5 (diesel) 116# SE3SL E5DLC
    Learn More
  8. Pacer Pumps S Series 2" J-Curve Hydraulic Drive Pump SE2JL HYC

    Pacer Pumps S Series 2" J-Curve Hydraulic Drive Pump SE2JL HYC

    $439.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only

     

    Curve Port Size Req'd HP Weight Model
    E 1 1/2" 2 16# SE1-1/2EL HYC
    F 2" 3 16# SE2FL HYC
    H 2" 3 16# SE2HL HYC
    I 2" 5 16# SE2IL HYC
    J 2" 5 16# SE2JL HYC
    L 3" 5 16# SE3LL HYC
    Learn More
  9. Pacer Pumps S Series 3" L-Curve Hydraulic Drive Pump SE3LL HYC

    Pacer Pumps S Series 3" L-Curve Hydraulic Drive Pump SE3LL HYC

    $509.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only

     

    Curve Port Size Req'd HP Weight Model
    E 1 1/2" 2 16# SE1-1/2EL HYC
    F 2" 3 16# SE2FL HYC
    H 2" 3 16# SE2HL HYC
    I 2" 5 16# SE2IL HYC
    J 2" 5 16# SE2JL HYC
    L 3" 5 16# SE3LL HYC
    Learn More
  10. Pacer Pumps G Series Three Phase E-Curve Electric Drive Pump 1-1/2/2ELD2.0C

    Pacer Pumps G Series Three Phase E-Curve Electric Drive Pump 1-1/2/2ELD2.0C

    $629.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    THREE PHASE 230/460 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL D.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL D.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL D1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL D1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL D2.0C
    Learn More

Items 1-10 of 73

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Ascending Direction