Pumps - Accessories
A pump moves fluids, such as gases, slurries, and liquids. Pumps work in many different ways, such as manually, via electricity, wind power, and engines. These pumps are used for different reasons.
They are used to pump water from wells, filtering ponds, and aquariums, in vehicles, such as water pumps, and pumps for moving gas and oil through your vehicle. They are also used for getting water out of basements, and many more reasons.
Rural King has many different types and brands of pumps and accessories available. The Pacer Pumps S Series 2" U-Curve 5.5 Honda GX Engine Drive Pump is a self-priming centrifugal pump that is lightweight and chemically resistant for general service on water, salt water, waste water, and mild acids. You can choose a Briggs & Stratton, LCT and Honda, and they can be bought as electric, gas, or hydraulic powered.
If you need a sump pump, we offer the Wayne cast iron submersible sump pump with tether float switch. Demand Pumps are also available, as well as pedestal sump pumps and many more. No matter what type of pump you need you can find it at your local store or online.
- Flow (GPH) - 9,000
- Max. PSI - 44
- Engine - Briggs & Stratton
- Engine Type - OHV
- Engine Displacement (cc) - 127
- Engine Speed (RPM) - 3,600
- Suction Port (in.) - 2
- Discharge Port (in.) - 2
- Max. Suction Lift (ft.) - 25
- Max. Total Head (ft.) - 100
- Self-Priming - Yes
- Solid Handling (in.) - 1/8
- Pump Housing - Glass-filled polyester
- Check Valve - EPDM rubber
- Seals - EPDM
- Impellers - Glass-filled polyester
- Volute - Glass-filled polyester
- Max. Fluid Temp. (deg.) - 200
- Start Type - Recoil
- Fuel Capacity (gal.) - 0.52
- Run Time - 45min. - 1hr.
- Low Oil Shutdown - No
- Dimensions L x W x H (in.) - 21 x 17 x 15
- Manufacturer Warranty - NTE 1 year RA/Exchange Policy
- hip Weight - 44.0 lbs
Wayne cast iron lawn sprinkler pump is built to give you many years of dependable pumping service. Designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling, or any other applications where high water volume is needed. Can be used as a portable sprinkler or water transfer pump. Pump should be installed in a basement, garage, tool shed or pump house.
- Continuous duty pump has single stage motor
- Self-priming pump
- Dual voltage available (115/230), factory wired for 230V with easy conversion switch
- High-efficiency square flange motor is thermally protected to prevent overheating
- Rugged cast iron pump housing
- Stainless steel shaft for durability
- Can supports up to 8-10 sprinkler heads at 100ft.
- Glass reinforced thermoplastic impeller and diffuser for corrosion-resistance
- Ceramic/carbon-faced seal for long life
- Easy access drain port
- Heavy-duty cast iron mounting brackets
- Motor Speed: 3450 RPM
- UL and CSA listed
Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.
All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.
- Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
- Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
- Close-coupled, long-coupled or pedestal mounted
- Built-in check valve
- Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
- Suction lift to 25 ft. (7.6m) vertical
- 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
Curve Port Size Req'd HP RPM Weight Model A 1 1/2" 1/2 1750 13# SE1-1/2AL PE C 2" 1 1750 13# SE2CL PE E 2" 2 3450 13# SE2EL PE F 2" 5 3450 13# SE2FL PE H 2" 3 3450 13# SE2HL PE I 2" 7.5 3450 13# SE2IL PE J 2" 5 3450 13# SE2JL PE L 3" 5 3450 15# SE3LL PE
- 7.0 HP (210 CC) Powerease Engine
- Pull Start
- Fuel Tank Capacity, 0.95 Gallons (3.6L)
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- Centrifugal Aluminum Pump
- Heavy Duty Cast Iron Impeller
- 264 GPM Max Flow
- 85' Total Head (37 PSI)
- 26' Maximum Suction Head
- 1" Full Frame Protection
- 1 Year Warranty
- 79cc Powerease Engine
- Recoil Start and Low Oil Shutdown
- Fuel Tank Capacity - 0.5 Gallons (2L)
- 1" Intake Connection MNPT
- 1" Outlet Connection MNPT
- 42 GPM Max Flow
- Centrifugal Aluminum Pump
- Heavy Duty Aluminum Impeller
- 85' Total Lift
- 20' Suction Lift
- Champion 1" Complete Pump-In-A Box Package - Everything you need to get the water moving
- 1" Dewatering & Transfer Pump (Clear Water)
- Versatile pump for jobs in the backyard
- 31cc OHV Champion Engine - Provides plenty of power to get the water moving
- Aluminum Pump Housing & Impeller - Extends the life of the pump
- Self-Priming Design - Requires initial priming to operate
- Lightweight & Easy To Transport - Weighs less than 25 lbs; Built-in handle make it easy to lift
- Rubber Isolation Feet - Minimizes the pump from "walking" during operation
- Suction Hose
- Discharge Hose
Engine Specifications Engine Brand Champion Starting System Recoil Start Engine Cycles 4-Cycle Low Oil Shutdown No CC 31 cc Fuel Tank Capacity 0.1 gal.
Pump Specifications Gallons per Minute 30 GPM Inlet Diameter 1 in. Outlet Diameter 1 in. Self Priming Yes Pump Head Material Aluminum Pump Housing Drain Yes Quick Clean Out No Impeller Material Aluminum Suction Head 16 ft. Total Head Lift 95 ft.
- 2” Nylon pump
- EPA certified
- 7hp PowerEase engine with Low Oil Alert
- 154 gpm
- 115’ total lift
- 26’ suction lift
This Wayne Cast Iron Sewage Pump has a 1/2 HP motor and a 2in. solids capacity. Great for residential or light commercial applications. Comes with a tethered float switch for automatic operation.
- Reinforced polycarbonate Vortex impeller with steel shafts prevents clogs
- Rugged cast iron volute for durability
- Residential and light commercial sewage pumping
- Pumps Up To 5800 GPH @ 0'
- Reinforced, Corrosion-Resistant Thermoplastic Submersible Sewage Pump
- Piggy-Back Tether Float Switch For Automatic Or Manual Operation
- Combination 2"/3" NPT Discharge Capable Of Handling Up To 2" Solids
- Designed For Easy Installation Without Any Plumbing Changes
- Easy Carry Handle For Portability
- Cast Iron Seal Plate
- Lower Ball Bearings For Quiet Operation
- Designed For 18” Diameter Or Larger Sewage Basins