Pumps - Accessories
- Inner Diameter: 1 in.
- Design Type: Turbine
- Fitting: NPT (Female) 1 in.
- Accuracy: 3.0% of reading
- Flow Range: 5 to 50 GPM, 19 to 190 LPM
- Operating Temperature: +32 to +140 F
- Reads: Gallons
- Electronic Choice: Rate of Flow, Field Calibration, Batch, and Cumulative Total options
- Wetted Materials: PVC Housing, Ceramic Bearings, 316 Stainless Steel Rings, PVDF Rotor, and Tungsten Carbide Shaft.
- Powered By: 5 year Lithium Battery
- Pressure Rating: 225 PSIG, 15.3 Bar, at 73 F/23 C.
- Typical K-Factor: 565
- To Use With: OEM Water Treatment Equipment/Skids, Small Waste Water Treatment Equipment, Sub-Metering of of Facility Water Usage, and Water Based Cooling System.
- Approvals: CE
- Warranty: 1 Year
2" High Pressure Pump_HP-2070R
- 210cc Powerease Engine
- Recoil Start & Low Oil Shutdown
- Fuel Tank Capacity 0.95 GAL.(3.6L)
- 2" Intake Connection MNPT
- 2" Outlet Connection MNPT
- 126.0 GPM Max Flow
- Centrifugal Aluminum Pump
- Aluminum Impeller
- 197' Total Lift (85 PSI Outlet Pressure)
- 26' Suction Lift
- 2 Year Powerease Engine Limited Warranty
The Econo-Ag Pump is the original thermoplastic selfpriming centrifugal pump for agriculture with the highest flow of any comparable plastic pump on the market
- Housing, volute and impeller: glass-reinforced polyester
- Rubber parts: EPDM
- Shaft seal: stainless steel with carbon and ceramic faces, EPDM fitted
- Internal fasteners: stainless steel
- External fasteners: plated steel
- Maximum working pressure: to 50 psi
- Maximum flow: to 195 GPM
- 2", 5.5 HP engine driven pump
- Consult Factory for optional 'PROTEK' Engine Protection System