McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

ORDER BY PHONE:

1-800-561-1752

7AM - 5PM CST 7 Days a Week

SPECIAL SALES & COUPONS!

Subscribe to receive members-only deals in your email

FREE SHIPPING*

ORDERS $149+

View Details

Pumps - Accessories

Pumps - Accessories

Items 11-20 of 53

per page

Grid List

Set Ascending Direction
  1. Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    Pacer Pumps S Series 3" L-Curve Single Phase Electric Drive Pump SE3LL C5.0C

    5.0
    1
    $1,199.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    SINGLE PHASE, 115/230 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL G.5C
    C 2" 1 1750 1 SE2CL G1.0C
    E 2" 2 3450 1.17 SE2EL C2.0C
    H 2" 3 3450 1 SE2HL C3.0C
    J 2" 5 3450 1 SE2JL C5.0C (230V)
    L 3" 5 3450 1 SE3LL C5.0C (230V)
    Learn More
  2. Pacer Pumps I Series W-Curve 127cc Engine Drive Pump ISE2WL E4CP

    Pacer Pumps I Series W-Curve 127cc Engine Drive Pump ISE2WL E4CP

    $762.97

    Pacer Pumps' I Series Self-Priming Centrifugal pumps are lightweight and provide corrosion resistance and efficient performance for a wide variety of water and corrosive liquid applications - for chemicals, wastes, acids and other industrial liquids. Also ideal for use in the oil field, aquaculture and agriculture.

    Features:

    • Corrosion resistant materials: 316 stainless steel casing, fiberglass reinforced polyester, polypropylene, or Ryton® internals
    • Choice of drives: gasoline engine, electric, hydraulic or pneumatic
    • Rubber components: choice of BUNA, EPDM or Viton®
    • Shaft seals: choice of carbon & ceramic, or silicon carbide
    • Suction lift to 20 ft. (6m) vertical
    • Flow rates: to 170 GPM or 75 ft. TDH (to 650 LPM or 23m TDH)
    • Dual ports 1 1/2" and 2", NPT or BSP
    • Built-in check valve and double flush volute
    • Close-coupled, long coupled or pedestal mounted

    PACER PUMPS with stainless steel housing and polyester internal parts:
     
    Curve Port Size Engine Weight Model
    W 1 1/2" / 2" 127cc 64# ISE2WL E4CP
    W 1 1/2" / 2" 205cc 71# ISE2WL E5ICP
    Learn More
  3. GPI Flowmeter, Turbine, PVC, 4 In, FNPT TM400-N

    GPI Flowmeter, Turbine, PVC, 4 In, FNPT TM400-N

    $716.97

    These durable meters offer accuracy at a reasonable price for measuring water and are available in flow ranges from 1 to 200 GPM and 1/2'' to 2'' inch fitting sizes. Meters indicate totalization and rate of flow, and read up to 999,999 gallons or liters—switch between gallon and liter and the electronics will indicate accurately in both units of measure. Models 05611-10 to -19 offer digital indication powered by two replaceable lithium batteries. Models 05611-50 to -59 have no display and have a square wave pulse output. Flowmeters are available with NPT or male spigot fittings, and work perfect for existing PVC plumbed systems. Wetted parts include the PVC housing, tungsten carbide shaft, PVDF rotor and supports and ceramic bearings. Flowmeters are field calibrateable.

    Learn More
  4. Pacer Pumps G Series Single Phase D-Curve Electric Drive Pump 1-1/2/2DLC1.5C

    Pacer Pumps G Series Single Phase D-Curve Electric Drive Pump 1-1/2/2DLC1.5C

    $755.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    SINGLE PHASE 115/230 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL C.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL C.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL C1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL C1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL C2.0C
    Learn More
  5. GPI M-3130-PO Super Heavy Duty Vane Pump Fuel Systems Combo 133601-59

    GPI M-3130-PO Super Heavy Duty Vane Pump Fuel Systems Combo 133601-59

    $1,129.97

    115-volt AC Super Duty Fuel System without hose and nozzle. MR 5-30 Mechanical Fuel Meter is calibrated in gallons with 1 in. NPT outlet. Pump is UL Listed to U.S. and Canadian safety standards. Motor is UL Listed and CSA Certified.

    • Unique strainer and poppet design allows for easy access and maintenance
    • To use with diesel fuel (up to 20% biodiesel blends such as B20), Gasoline (up to 15% alcohol blends such as E15), Kerosene

    Includes:

    • M-3130
    • MR 5-30 Meter
    • Tank Adapter

     

    Specifications
    Model  M-3130-PO / MR 5-30-G8N
    Design Type Vane
    Voltage 115 or 2330 Volts AC
    Fitting NPT
    Mechanical Connection   1 1/4 in. Inlet, 1 in. Outlet
    Flowrate Up to 30 GPM, Up to 114 LPM
    Accuracy ±2% of reading
    Nozzle Pump Only
    Reads Gallons
    Duty Cycle 30 minutes on / 30 minutes off
    Power Cord Sold Separately
    Motor Protection  Internal temperature-limiting device 
    Suction Pipe Sold Separately
    Approvals U.L. Listed Motor to U.S. and Canadian Standards, CE  
    Learn More
  6. Pacer Pumps G Series Single Phase A-Curve Electric Drive Pump 1-1/2/2AL C.5C

    Pacer Pumps G Series Single Phase A-Curve Electric Drive Pump 1-1/2/2AL C.5C

    $588.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    SINGLE PHASE 115/230 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL C.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL C.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL C1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL C1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL C2.0C
    Learn More
  7. Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    Pacer Pumps S Series 1-1/2" A-Curve 3 Phase Electric Drive Pump SE1-1/2AL H.5C

    $506.97

    Pacer Pumps' S Series Self-Priming Centrifugal pumps are lightweight, chemically resistant pumps for general service on water, salt water, waste water, mild acids and bases. They feature non-metallic solution contact or stainless steel internal fasteners; Viton®, ethylene propylene or Buna O-rings and gasket with stainless steel external fasteners. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton®. Polyester models are available with or without lined volute for abrasion resistance.

    All pumps include a built-in check valve, feature easy servicing and during pumping, a self-cleaning double volute keeps pump free of settled solids.

    Features:

    • Choice of materials: pump constructed of: polyester, polypropylene or Ryton®. Suitable elastomers, and stainless steel or non-metallic fasteners for resistance to chemical attack
    • Choice of drives: electric motor, gasoline driven, hydraulic or pneumatic driven
    • Close-coupled, long-coupled or pedestal mounted
    • Built-in check valve
    • Flow rates: to 280 U.S. GPM or 120 ft. TDH @ 60 Hz (to 883 LPM or 25.4m TDH @ 50 Hz)
    • Suction lift to 25 ft. (7.6m) vertical
    • 1 1/2", 2" or 3" ports, NPT, BSP available in polyester only
    THREE PHASE, 230/460 VOLT, TEFC
               
    Curve Port Size Req'd HP RPM Max. Spec. Gravity Model
    A 1 1/2"  1/2 1750 1 SE1-1/2AL H.5C
    C 2" 1 1750 1 SE2CL H1.0C
    E 2" 2 3450 1.17 SE2EL D2.0C
    H 2" 3 3450 1 SE2HL D3.0C
    J 2" 5 3450 1 SE2JL D5.0C
    L 3" 5 3450 1 SE3LL D5.0C
    Learn More
  8. GPI M-3130-ML/MR 5-30-G8N Vane Fuel Pump & Meter 133601-57

    GPI M-3130-ML/MR 5-30-G8N Vane Fuel Pump & Meter 133601-57

    $1,099.97

    115-volt AC Super Duty Fuel System with manual leaded nozzle and MR 5-30 Mechanical Fuel Meter calibrated in gallons with 1 in. NPT outlet. Pump is UL Listed to U.S. and Canadian safety standards. Motor is UL Listed and CSA Certified.

    • Unique strainer and poppet design allows for easy access and maintenance
    • To use with diesel fuel (up to 20% biodiesel blends such as B20), Gasoline (up to 15% alcohol blends such as E15), Kerosene

    Includes: 

    • M-3130
    • MR 5-30 meter
    • 12 ft. of hose
    • Tank adapter
    • Manual nozzle

     

    Specifications
    Model M-3130-ML/MR 5-30-G8N
    Design Type Vane
    Voltage 115 or 230 Volts AC
    Fitting NPT
    Mechanical Connection   1 1/4 in. Inlet, 1 in. Outlet
    Flowrate Up to 30 GPM, Up to 114 LPM
    Accuracy  ±2% of reading
    Nozzle Manual
    Reads Gallons
    Duty Cycle 30 minutes on / 30 minutes off
    Power Cord Sold Separately
    Hose 12 ft (3.7 m), 1 in. diameter
    Motor Protection Internal temperature-limiting device
    Suction Pipe Sold Separately
    Approvals U.L. Listed Motor to U.S. and Canadian Standards  
    Learn More
  9. Pacer Pumps G Series Single Phase E-Curve Electric Drive Pump 1-1/2/2ELC2.0C

    Pacer Pumps G Series Single Phase E-Curve Electric Drive Pump 1-1/2/2ELC2.0C

    $769.97

    Self-priming centrifugal, glass reinforced Noryl construction, stainless steel internal and external fasteners, EPDM O-rings, integral Noryl shaft sleeve, dual 1-1/2" female and 2" male threaded suction and discharge connections, built-in polypropylene basket strainer, close-coupled to an electric motor, mounted on polypropylene baseplate. 

    SINGLE PHASE 115/230 VOLT, 3450 RPM, TEFC
             
    Curve Port Size Req'd HP Volt Model
    A 1-1/2" / 2" 0.5 1 GNOK 1-1/2/2AL C.5C
    B 1-1/2" / 2" 0.75 1 GNOK 1-1/2/2BL C.75C
    C 1-1/2" / 2" 1 1 GNOK 1-1/2/2CL C1.0C
    D 1-1/2" / 2" 1.5 1 GNOK 1-1/2/2DL C1.5C
    E 1-1/2" / 2" 2 1 GNOK 1-1/2/2EL C2.0C
    Learn More
  10. GPI Chemical Transfer Pump PA-200H-2UR

    GPI Chemical Transfer Pump PA-200H-2UR

    $569.97

    115-volt Plastic Gear Pump for medium/thick fluids. Flow range up to 8 GPM (30 LPM). Includes grounded, three prong power connector pigtail and tank bung adapter. 2 inch NPT union ring tank mount. Fits 2 inch bung. Order hose, nozzle, and suction pipe separately.

    • Model PA-200H-2UR
    • Voltage & Type 115-Volt AC - Molded Plastic Housing - Gear
    • Flow Rate up to 8 GPM 30 LPM
    • Nozzle Sold Separately
    • Inlet 1 In.
    • Outlet 1 In.
    • Operating Temperature -20 to +120° F -30 to +50° C
    • Duty Cycle 30 minutes on / 30 minutes off
    • Power Cord Three-prong power connector pigtail
    • Motor Protection Automatic thermal protector & circuit breaker
    • Suction Pipe Sold Separately
    • Use with 10 - 450 centipoise viscosity Medium / Thick Chemicals
    • Do not use with Diesel Fuel Gasoline Micro-Encapsulated Chemicals
    • Standard CSA Certified
    • Unique Feature The pump of choice for thicker chemicals. This model includes a two-inch union ring.
    • 2 Year Manufacturer Warranty
    Learn More

Items 11-20 of 53

per page

Grid List

Set Ascending Direction