Pumps - Accessories
A pump moves fluids, such as gases, slurries, and liquids. Pumps work in many different ways, such as manually, via electricity, wind power, and engines. These pumps are used for different reasons.
They are used to pump water from wells, filtering ponds, and aquariums, in vehicles, such as water pumps, and pumps for moving gas and oil through your vehicle. They are also used for getting water out of basements, and many more reasons.
Rural King has many different types and brands of pumps and accessories available. The Pacer Pumps S Series 2" U-Curve 5.5 Honda GX Engine Drive Pump is a self-priming centrifugal pump that is lightweight and chemically resistant for general service on water, salt water, waste water, and mild acids. You can choose a Briggs & Stratton, LCT and Honda, and they can be bought as electric, gas, or hydraulic powered.
If you need a sump pump, we offer the Wayne cast iron submersible sump pump with tether float switch. Demand Pumps are also available, as well as pedestal sump pumps and many more. No matter what type of pump you need you can find it at your local store or online.
Regular Price: $59.99
Special Price: $39.99
Motor Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
Leads: 14 AWG, 12” long
Duty Cycle: See Heat Rise graph
Temperature Limits: Motor is not equipped with thermal protection. For user safety, optimal performance, and maximum motor life, the motor surface temperature should not exceed 150°F (66°C).(See Heat Rise graph)
Materials of Construction
Fasteners: Stainless Steel
Motor Shell: Coated Steel
Type: 3 chamber positive displacement diaphragm pump, self priming, capable of being run dry, demand or bypass mode
Certifications: CE Approval
Liquid Temperature: 140°F (60°C) Max.
Priming Capabilities: 14 feet (4 m)
Max Pressure: 60 PSI (4.4 bar)
Inlet/Outlet Ports: 3⁄8” FNPT
Weight: 6 lbs (2.7 kg)Learn More
Motor Type: 12 VDC permanent magnet, thermally protected, splashproof
2200-1: 18 AWG, 9” long
2200-2/2200-3: 18 AWG, 4.5” long with 2-pin connector
Duty Cycle: Intermittent
Materials of Construction
Motor Housing: Nylon 6/6
Pump Housing: Polypropylene
Fasteners: Stainless steel and zinc plated
Type: 2 chamber positive displacement diaphragm pump, self priming, capable of being run dry
Max Recommended Temperature: 110°F (43°C)
4 feet (1.2 m) suction lift
Max Pressure: 40 PSI (2.8 bar)
Pressure Demand Switch:
Shut-Off: 40 ±5 PSI (2.8 ±0.3 bar) factory setting
Turn-On: 25 ±5 PSI (1.7 ±0.3 bar)
Inlet/Outlet Ports: 3⁄8” hose barb
Weight: 1.25 lbs (.57 kg)Learn More
For sump applications, the PSU 1011 is designed to hold a sump pump. It is ideal for basement applications where a submersible or pedestal sump pump is required. The single piece basin is injection molded polyethylene structural foam and provides superior toughness and reliability. The rim of the basin includes pre-drilled holes with inserts to accept the mounting and securing of a cover. The ultra-strong reinforced bottom will not buckle, deform or puncture, even under the harshest soil or ground water conditions. The PSU 1011 has multiple cover options and will provide decades of reliable service.
- Heavy duty structural foam injection molded construction
- Cover mounting inserts included on basin
- Ultra strong, reinforced bottom will not flex
- Gas and Radon tight; Odor free
- Size: 18" x 22"
- Capacity: 20 Gallons
- Material: Injection Molded Polyethylene Structural Foam
- Heavy-duty glass reinforced polypropylene.
- Clear polypropylene bowl.
- Polypropylene ribbed 316 stainless steel screens.
- EPDM gaskets standard. FKM (viton type) available.
- Clear Bowl Max 100 P.S.I. at 70°F.
- Convenient color coded screens for easy mesh size identification. (Refer to chart below)