This kit will make a 10x20 canopy an enclosed unit. It is not the entire unit.
- Converts your 10' x 20' Max AP Canopy to a fully enclosed shelter.
- Triple-layer, ripstop white polyethylene cover is 100% waterproof. Cover is UV treated inside and out with heat-sealed seams for added protection against the elements.
- 50+UPF rating blocks more than 98% of UV harmful rays. UPF represents Ultraviolet Protection Factor and indicates how much of the sun's radiation is absorbed. 50+UPF is the highest fabric rating for radiation exposure. Only 2% of the UV rays will penetrate through the shade fabric.
- Enhanced visibility clear polyethylene windows.
- Great for seasonal storage or backyard events.
- 10' x 20' White Canopy Enclosure Kit
- (1) Solid Rear Panel
- (2) Solid Wide Walls
- (1) Solid double zippered door Panel
- Bungee Cords
- Easy Step-by-Step Instructions
Starting off square and level is essential to a successful shed assembly and we recommend that you consider a base kit to self-square the shed and help level the site. Base kits are available for the majority of Arrow sheds. The base kit must be assembled with your selected floor finishing option before you start to build your shed. Use the flooring material that best suits your needs, such as wood, patio blocks, or gravel. The base kit may also be used as a form for pouring concrete.
- Made of durable hot-dipped electro-galvanized steel
- Keeps building and stored items off the ground
- Easy to install
- Includes all hardware
- Does not include floor all finishing materials (If finishing with wood flooring, use exterior-grade plywood, measured to base kit dimensions)
Fits Arrow shed sizes:
- 10' x 12'
- 10' x 13'
- 10' x 14'
Think your gun safe is full? Think again!
Now you can store more guns and access them easier. Lift out the standard plywood rack(s) in your safe and replace it with Rifle Rods. Gun Storage Solutions American-made Rifle Rods individually stabilize each long gun upright, rather than leaning, for more versatility. The Shelf Liner provided in Rifle Rods Starter Kits, adapt any space - gun safe, closet, cabinet or anywhere there is a shelf. Rifle Rods work great for guns with scopes, shotguns, and tactical weapons. Customers report an average increase of 50% more guns.
40 Rifle Rods
- Fits as small as 22 caliber
- Total length - 16"
- Injection molded plastic product
- Ultra-sonically welded VelcroTM coin on top
19" x 60" Shelf Liner
- Industrial grade 100% nylon woven loop fabric.
- Required for use with Rifle Rods.
- Will hold up to 72 long guns with Rifle Rods Add-ons.
- For proper application, attach to wooden shelf with a staple gun or upholstery tacks
The Metal Pegboard Standard Workbench Tool Storage Organizer Kit offers maximum tool board storage versatility and strength with over 10.5 square feet of pegboard storage space. Three 16in x 32in Green powder-coated pegboard panels combine for a total tool storage area of 48in x 32in. The attractive Metal Pegboards are great for heavy duty toolboard storage needs due to their 20 gauge steel construction that will not warp, fray, or crack and are over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. Wall Control metal pegboards offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by giving the user multiple options with tool board accessory selection. Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors. Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility.These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- (3) Green Powder-Coated Metal Pegboard Panels 32in x 16in (Covers 48in x 32in when Installed)
- (1) 9in Shelf Assembly
- (1) 6in Shelf Assembly
- (3) Plastic Hanging Bins with Bin Hanger
- (1) Screwdriver Holder
- (1) Hammer Holder
- Assortment of (20) Additional Hooks and Brackets
- Mounting Hardware is Included
- Metal Pegboard is in Green with Black Slotted Toolboard Accessories
- Tools & Tool Sets Not Included
- Over 10 Times Stronger than Conventional Pegboard
- Easy to Install
- Made in USA
Baked-on electrostatic powder coating on this classic mailbox ensures great looks and long life. Hand fabricated.
- Baked-on electrostatic powder coating
- Hand fabricated
- Dimensions: 10"H x 8"W x 21"D
- Dark Green
Innovative patent-pending ShelterLogic Firewood Seasoning Shed is designed to create burnable wood fast — twice as fast as open air drying. Seasons wood for indoor fireplaces, outdoor fire pits, chimineas, outdoor wood boilers and more.
A heavy-duty steel frame with ShelterLock stabilizers provides a strong, stable building. The translucent polyethylene ripstop fabric cover allows light in and retains heat to dry wood faster. The floor vapor barrier keeps excess ground moisture out and cross ventilation aids the drying process. This shed is sized to hold up to 1/2 cord of wood.
- Shed features zippered front door panels for easy stacking and access to wood
- Screened vents allow for increased airflow
- Cross ventilation wicks away moisture to assist the drying process
- Easy Slide cross rail system and Ratchet Tite tensioning provide solid cover anchoring to the frame
- Drying times are dependent on geography and seasons
- Shed includes ratchet tie-downs, auger anchors, bungee cords and instructions
- Creates dry, seasoned firewood 2X faster than open air drying
- Heavy-duty 34mm steel frame has Dupont premium powder-coat finish that resists chipping, peeling, rust and corrosion
- ShelterLock stabilizers strengthen and stabilize frame
- Translucent triple-layer 5.5-oz. polyethylene ripstop fabric cover allows light in and retains heat to dry wood faster
- Cover has heat-bonded seams and is 100% waterproof
- Cover is UV treated with added fade blockers, anti-aging and anti-fungal agents for long life
- Floor vapor barrier keeps out excess ground moisture
Maximize your storage space with this easy to assemble boltless shelving. Ideal for light and medium capacity applications. Shelves are height adjustable in 1.5" increments. There are 5 shelves and each shelf has a 375 pound capacity.
- 3/4 inch particle board decking
- 1.5 inc height adjustable increments
- Gray in color
- 375 lb capacity per shelf
- 5 shelves
- Width (in.): 48"
- Depth (in.): 24"
- Height (in.): 84"
The Wall Control Pegboard Hobby Craft Pegboard Organizer Storage Kit for crafting pegboard organization offers maximum tool board storage versatility. The two 16in x 32in powder-coated metal pegboard panels combine for a total tool storage area of 32in x 32in, or over 7 Square Feet of pegboard storage space. These Metal Pegboard Panels are not only attractive but strong due to their 20 gauge steel construction which makes them over 10 times stronger than conventional pegboard creating a durable craft storage solution that will last a lifetime. The Wall Control metal pegboard panels offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by offering the user multiple options with toolboard and pegboard accessory selection. The patented engagement of the slotted tool board hooks included improves hook security for more hassle free craft tool storage. These versatile, durable, and high strength metal pegboard panels are an easy-to-use tool storage solution for any hobby and craft room, garage, or workshop. The Yellow powder-coated metal pegboard panels are easy to install into studs or flat surfaces with pre-drilled mounting holes which allows for installation in a matter of minutes. A built-in frame return flange provides ample hook clearance and full access to all holes without requiring additional framework or using up pegboard holes for mounting. Mounting hardware is also included. Wall Control Pegboard Products are Made in the USA.
- (2) Red Metal Pegboard Tool Boards 32in Tall x 16in Wide (covers 32in x 32in Total)
- (1) 9in Shelf Assembly with Shelf Dividers
- (1) 6in Shelf Assembly
- (1) Spray Can Holder Assembly (holds 4 cans)
- (3) Plastic Bins with Bin Hanger
- (10) Assorted Hooks and Brackets
- Slotted Toolboard
- Tools and Tool Sets Not Included
Designed for heavy duty and extra heavy duty applications, this bulk shelving features 2" x 2" upright columns and heavy duty 3" beams (beam height). Uprights can be assembled in about 10 minutes per column. Beams click securely into columns. Beams are height adjustable in 2" increments. All units include wire mesh decking. The beams are powder coated orange and uprights are powder coated green per OSHA guidelines.
- 2" x 2" upright columns
- Heavy duty 3" beams (beam height)
- Easily Assembled in minutes
- Beams click securely into columns
- Beams are height adjustable in 2" increments
- Includes wire mesh decking
- Beams are powder coated orange
- Uprights are powder coated green
- 2000 lb Capacity per shelf
- Width (in.): 48"
- Depth (in.): 36"
- Height (in.): 72"
$134.97Monkey Bars has put together their most popular hooks to make up a sports rack to hold all types of sporting equipment. This rack will hold 8-10 basketballs, volleyballs, soccer balls, or footballs. The hooks will hold football pads, baseball gloves and bats, hockey sticks and pads, lacrosse sticks and pads, helmets, tennis racquets, golf bags, and it will even hold one bike. The rack can store all these types of gear using just 4 feet of wall space. Tripping over sports gear will no longer be a problem because it will all be stored on the wall in one location. This rack can be configured to meet the needs of any sports enthusiast. Installation is easy and only takes 15 minutes. Few tools are required for installation. This durable rack comes with a lifetime warranty. Learn More