Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four steel corner gusset and perimeter clips
- Lag bolts building directly into concrete slabs
- 1/4" masonry drill bit
This jumbo size mailbox is constructed from heavy-duty galvanized steel and has a durable ribbed body for extra strength. Its extra large capacity can hold mail for days as well as small parcels. Steel latch and aluminum flag. Rust resistant powder coat finish.
- Dimensions: 24.125" x 15.25" x 12"
- Weight: 11.4 lbs
The Wall Control Slotted Tool Board Deluxe Hook Assortment includes 26 durable steel slotted toolboard hooks and brackets that feature a scratch and rust resistant baked-on white finish. These more secure and stable toolboard hooks are for use with the slots found in all Wall Control Metal Pegboard tool board panels. Wall Control Slotted Toolboard hooks offer a patented engagement that requires two deliberate motions up-and-down to engage and disengage the hooks. This feature makes Wall Control Slotted Tooboard hooks less likely to fall out of the tool board than conventional peg hooks that can easily fall off when tools are removed. Although Wall Control Metal Pegboard Panels will accept conventional 1/4in pegboard accessories as well as Wall Control Slotted Accessories the Slotted Secure Tool Board Hooks included in this set are only for use with Wall Control Metal Pegboard Panels and Tool Boards. Wall Control Slotted Tool Board Hooks offer a baked-on color finish that is attractive and rust resistant for long lasting tool storage aesthetic appeal.
- (10) Standard Slotted Toolboard Hooks, 3/4in Reach
- (4) Medium Slotted Toolboard Hooks, 1-7/8in Reach
- (4) Medium 90 Degree Toolboard Hooks
- (2) Slotted Toolboard U-Hooks, 3in Reach
- (2) Slotted Toolboard C-Brackets, 1in x 1in
- (2) Slotted Toolboard C-Brackets, 2in x 2in
- (1) Extended Toolboard Hook, 9in Reach
- (1) Slotted Toolboard Handle Hammer Holder, 1-1/4in
- More secure tool board hook engagement over conventional peg board pegs.
- Made in USA
- Electronic Lock can Easily be Programmed by the User with a “Safety Key” Override.
- Available in Black.
- California approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued there under.
- Electronic lock has an easy to read key pad and includes a low battery warning light. Time out period after 3 incorrect combination attempts.
- Back-up trouble key is included.
- Includes a removable mounting plate.
- Locking Plate can be affixed to a location and the safe can be secured to the plate or removed by accessing a bolt inside the safe.
- It can be mounted in the trunk of a car and then moved to a different location in the house or pistol range.
- Safe has pre-drilled holes for mounting to the floor or a shelf with the locking plate.
- Holes have also been included in the top for mounting under the bed or in a locker.
- Exterior Dimensions: 9-7/8" W (25.1cm), 13" D (33cm), 4-1/4" H (10.8cm)
- When storing firearms it is recommended that safes be bolted to the floor, a shelf or wall for added security.
This all in one combo is includes a heavy gauge galvanized steel mailbox, dual reinforced steel post with scrolls, and mounting hardware. This combo has a rust resistant finish.
- Dimensions: 60.8" H x 6.875" W x 20.25" D
- Weight: 11.4 lbs
The Brute™ is a large size mailbox made of highly durable polymer construction. Weather resistant. Proudly made in the USA.
- Dimensions: 21" x 12" x 9.5"
- Weight: 4.7 lbs
The Windmere large size mailbox gives you durability and elegance with the heavy duty steel along with decorative frame and antique gold finish hardware.
- Dimensions: 11.375" x 9" x 22.5"
- Weight: 9.1 lbs
This handy mailbox post does not require digging or concreting for installation. It is constructed from heavy-duty galvanized steel with a black powder paint finish. It features an adjustable mailbox support arm, which allows the mailbox to be adjusted to the proper height from the ground. The post accommodates standard and large size mailboxes. The kit includes all assembly and mailbox mounting hardware and instructions.
- Dimensions: 34" x 5.5" x 2.875"
- Weight: 11.75 lbs
Increase the roof strength of your shed by 50% to help withstand heavy snow accumulation. Our roof strengthening kits fit most Arrow buildings and can be installed on new or existing buildings.
- Fits Arrow shed sizes: 6' x 5' and 8' x 6'
- Made of electro-galvanized steel
- All necessary hardware included
- Color: Gray
The Metal Pegboard Pack offers maximum tool board storage versatility and strength. The two 16in x 32in metal pegboard panels combine for a total tool storage area of 32in x 32in, or over 7 Square Feet of pegboard storage space. These attractive Metal Pegboard Panels are also great for heavy duty pegboard storage needs due to their 20 gauge steel construction which makes them over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. The Wall Control metal pegboard panels offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by offering the user multiple options with pegboard hooks, brackets, shelves, and general toolboard and pegboard supplies selection.
- Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors.Over 10 Times Stronger than Conventional Pegboard
- Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility
- Easy to Install. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- Made in USA