Keep your firearms safe and out of the reach of children with the Bear Arms pistol safe. The safe is built to last with its 16-gauge steel, high strength locking mechanism, and tamper-proof protection make this safe sturdy and tough. The safe has a customized security code with over 12 million possible combinations. Should all go wrong, however, it does have an emergency back-up key override. Not only is it safe from outside dangers, you don't need to worry about it scratching your pistol. The Bear Arms pistol safe has a protective interior to protect your pistol from scratches and dings. The safe is battery powered for portability and security. Even if your power goes out this safe will remain locked and armed. Bear Arms understands why firearms are important to you and understand your desire to keep them and your family safe. This understand is evident in there quality craftsmanship.
- Customized security code
- Back-up key override
- Optional silent mode
- Over 12 million possible combinations
- High strength lock mechanism
- 16-gauge steel
- Protective interior
- Tamper proof protection
- Battery powered for maximum security & portability
Outer Safe Dimensions:
- 11.5 inches long
- 9 inches wide
- 7 inches high
- Quick Access Electronic Lock can Easily be Programmed by the User with a “Trouble Key” Override.
- Available in Black.
- California approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued there under.
- Electronic lock has an easy to read key pad and includes a low battery warning light.
- Time out period after 3 incorrect combination attempts.
- Back-up trouble key is included.
- Solid steel, pry resistant door has concealed hinges and 2 steel live action locking bolts.
- Includes 1 removable shelf.
- Foam padded bottom and shelf.
- Exterior Dimensions: 13-3/16" W (35cm), 9-13/16" D (25cm), 9-13/16" H (25cm)
- When storing firearms it is recommended that safes be bolted to the floor, a shelf or wall for added security.
This residential in-ground pole kit comes complete with a 3'x5' printed, polycotton U.S. flag, 18', 19 gauge, 5-section white steel pole, 3" gold aluminum ball top, 6" die-cast aluminum cleat, halyard rope, two snap hooks and 18" pvc ground sleeve. Flag is 100% made in the U.S.A.Learn More
The Tuff Body Mailbox is virtually indestructible & vandal resistant! Constructed of 20 lbs. of heavy gauge steel, its powder coat black finish ensures long life and durability. The stainless steel piano hinged door and heavy steel flag are secured with steel fasteners.
- Dimensions: 10" x 7.5" x 20.75"
- Weight: 21.155 lbs
To protect your stored items, you should consider having a floor above the base in your shed. If you are creating your own base, we recommend that you install a floor using an Arrow floor frame kit. If you are using our base kit, your floor is installed directly on the base kit and you do not need a separate floor kit (although you could consider it). An Arrow floor frame kit offers an easy way to construct a raised floor. This is especially useful if your base is dirt, gravel or grass. The Arrow floor frame kit is installed after your shed is completely assembled. The floor beams slot easily into the frame of your shed, providing an ideal framework for finishing with 5/8" exterior-grade plywood.
Fits Arrow Shed sizes:
- 8' x 8'
- 10' x 7'
- 10' x 8'
- 10' x 9'
- 10' x 10'
DOES NOT FIT THE HOMESTEAD 10' x 8'
The Arrow floor frame kit:
- Assembles in minutes
- Keeps stored items off the ground
- Has frames made of strong, hot-dipped galvanized steel
- Does not include plywood (Use 5/8” exterior-grade plywood, measured to floor frame dimensions)
Convert any traditional safe, locking cabinet, or secured area to store 6 modern sporting rifles and/or classic long guns at a fixed level on their barrel, rail, or magwell with military precision. With the Straight 6, the upper saddle mounts directly to the back of your safe or cabinet.
- 1 Straight Saddle - adjusts vertically to support long guns at the same level of their barrel, rail, or magwell (17.75" w x 4.75" D)
- 3 Base Units- interlocking base supports the stock of any long gun within a tiered channel. Each 6" W x 10" D base supports the butt stock of any 2 firearms
- Made in the USA
- Heavy duty all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Advanced engineered, triple-layer, chemically heat bonded enhanced quality weave, rip-stop, waterproof, polyethylene cover
- UV-treated inside and out with added fade blockers, anti-aging, and anti-fungal agents resulting in a cover that withstands the elements
- Rugged Ratchet Tite™ Tensioning System provides simple installation while keeping cover tight to frame
- Grey fitted cover
- Double zippered front door panel and solid rear panel (Unless otherwise noted)
- Ratchet tie-downs
- Auger anchors
- Steel foot plates
Kitchen pegboard storage and organization for pots pans and kitchen supplies, Wall Control's chic Kitchen Pegboard Pots and Pans Pegboard Organizer Storage and Organization Kit has your kitchen storage and organization needs covered. Wall Control combines the simplicity inspired by a classic pegboard storage and organization system with the modern touches of a high end kitchen by creating attractive wall mounted pegboard storage with strong and durable chic metal pegboard panels that will last a lifetime and are over 10 times stronger than conventional kitchen pegboard. Two 16in x 32in powder-coated metal pegboard panels combine for a total kitchen storage area of 32in x 32in, over 7 Square Feet of kitchen pegboard storage space and you can always add more kits to create a larger kitchen pegboard storage area. The pegboard panels offer both slots and holes to accept modern chic slotted tool board accessories as well as conventional 1/4in style peg board hooks making this pegboard extremely versatile by allowing for a wide range of kitchen pegboard hooks and supplies. The chic slotted tool board hooks included improve hook stability for more hassle free kitchen supplies storage and organization. Versatile, durable, and attractive metal pegboard panels are an easy-to-use kitchen supplies storage solution for kitchen utensils or pots and pans. The metal pegboard panels are easy to install into studs or walls and install in a matter of minutes. A built-in frame provides ample hook clearance and full access to all holes without requiring additional framework or using up pegboard holes for mounting. Mounting hardware is included. Wall Control Kitchen Pegboard Products are Made in USA. T
- (2) Blue Kitchen Pegboards 32in x 16in
- (18) Assorted Kitchen Tool Board Hooks for organizing pots pans and kitchen supplies
- Kitchen Supplies Not Included
$79.97The Ski Storage Rack 6 from Monkey Bars is the most versatile ski rack on the market. Monkey Bars have developed a 15 minute installation ski rack that will securely store 6 skis off the garage floor. Only 4 screws into 2 studs 48” apart, and you’re finished. No longer do you have to store skis in a corner; this gives you the versatility to store skis used less often off the ground and clear up valuable floor space. This rack does not limit you on the size of kis; store kids skis, Trick Skis and adult skis. Purchase your Ski Storage Rack today, and see for yourself how easy it is to organize your skis. Learn More
The Folding Chair Rack 12 by Monkey Bars allows you to store 12 to 15 folding chairs of various sizes. The folding chair rack can be installed in about 15 minutes and only uses 4 screws to mount two brackets to your studs 48” apart. The Folding Chair Rack is perfect for the garage, shop, shed, barn, or closet. Purchase yours today, and see for yourself how easy it is to organize your folding chairs.
2 - Single Bar Brackets
1 - 51" Monkey Bar
3 - 12" Hooks
1 - Hardware BagLearn More