Starting off square and level is essential to a successful shed assembly and we recommend that you consider a base kit to self-square the shed and help level the site. Base kits are available for the majority of Arrow sheds. The base kit must be assembled with your selected floor finishing option before you start to build your shed. Use the flooring material that best suits your needs, such as wood, patio blocks, or gravel. The base kit may also be used as a form for pouring concrete.
- Made of durable hot-dipped electro-galvanized steel
- Keeps building and stored items off the ground
- Easy to install
- Includes all hardware
- Does not include floor all finishing materials (If finishing with wood flooring, use exterior-grade plywood, measured to base kit dimensions)
Fits Arrow shed sizes:
- 10' x 12'
- 10' x 13'
- 10' x 14'
Think your gun safe is full? Think again!
Now you can store more guns and access them easier. Lift out the standard plywood rack(s) in your safe and replace it with Rifle Rods. Gun Storage Solutions American-made Rifle Rods individually stabilize each long gun upright, rather than leaning, for more versatility. The Shelf Liner provided in Rifle Rods Starter Kits, adapt any space - gun safe, closet, cabinet or anywhere there is a shelf. Rifle Rods work great for guns with scopes, shotguns, and tactical weapons. Customers report an average increase of 50% more guns.
40 Rifle Rods
- Fits as small as 22 caliber
- Total length - 16"
- Injection molded plastic product
- Ultra-sonically welded VelcroTM coin on top
19" x 60" Shelf Liner
- Industrial grade 100% nylon woven loop fabric.
- Required for use with Rifle Rods.
- Will hold up to 72 long guns with Rifle Rods Add-ons.
- For proper application, attach to wooden shelf with a staple gun or upholstery tacks
Since earliest times, mermaids have captured the imagination of seafarers. Based on an 1849 design, this beautiful mermaid is ready to grace the rooftop of your house, barn, garage, or cupola. Good Directions' artisans use Old World techniques to handcraft this fully functional, standard-size weathervane that's unsurpassed in style, quality and durability. A great gift for folk art enthusiasts!
- Figures, Directionals and Spacer balls are made of copper and brass for beauty and longevity
- Polished copper develops an attractive patina over time
- Dimensions: 29"L x 14"H
- Measurements are for figure only - Add an additional 32" to the overall height to accommodate the spacer balls, directionals and rod
Maximize your storage space with this easy to assemble boltless shelving. Ideal for light and medium capacity applications. Shelves are height adjustable in 1.5" increments. There are 5 shelves and each shelf has a 375 pound capacity.
- 3/4 inch particle board decking
- 1.5 inch height adjustable increments
- Gray in color
- 375 lb capacity per shelf
- 5 shelves
- Width (in.): 48"
- Depth (in.): 36"
- Height (in.): 84"
Designed for medium and heavy duty applications, this bulk shelving features heavy duty boltless shelving components.
- Easy to assemble
- Shelves are height adjustable in 1.5" increments
- Includes 3/4" particle board decking
- Steel color: Gray
- 3 Shelves with a 600 lb capacity per shelf
- Width (in.): 72"
- Depth (in.): 36"
- Height (in): 84"
All-purpose canopy provides temporary seasonal storage and protection from sun and rain. Perfect for outdoor art shows, flea markets, weddings, picnics or vehicle storage.
- Heavy duty 1 3/8" all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Triple layer, chemically heat bonded, enhanced weave, rip-stop, 100% waterproof, polyethylene cover
- UV treated inside and out with added fade blockers, anti-aging, anti-fungal agents
- One piece fitted full valance cover
- Bungee cords
- Foot plates
- Temporary spike anchors
Industrial quality steel platform carts are built to last. Features removable handle for easier transport and storage. Available in a variety of platform sizes to fit your specific requirement.
8 Inch casters
1600 Pound capacity
Width (in.): 36"Learn More
Length (in.): 72"
- Includes rear panel, 2 side walls, a double zippered front door panel and bungee cords. Frame sold separately.
- 4-wall panel shelter in less than 10 minutes.
- Genuine affordable SUPER MAX TM Accessory Kit made of the same triple-layer, rip-stop, woven polyethylene fabric material as our popular 18-wide canopies. UV-treated inside and out. Heat-sealed seams not stitched for a stronger bond and absolute water resistance.
- 50+UPF rating blocks more than 98% of UV harmful rays. UPF represents Ultraviolet Protection Factor and indicates how much of the sun's radiation is absorbed. 50+UPF is the highest fabric rating for radiation exposure. Only 2% of the UV rays will penetrate through the shade fabric. Easy-to-install pre-fit wall panels go up fast with bungee fasteners Double-zipper front door rolls up tight with bungee fastener to keep in place for easy access.
Start seedlings or extend your growing season with the GrowIT® Peak Backyard Greenhouse with Integrated Shelving. This easy-to-assemble, compact backyard greenhouse is constructed with high quality steel and features 4 ft. shelving on both sides for built-in staging of plants.
- Integrated Shelving Inside
- Zippered Door with Vent
- Dimensions: 6 Foot x 8 Foot x 6 Foot 6 Inches
- 1" / 2,5 cm high-grade steel frame with DuPont™ Premium powder coat finish resists chipping, peeling, rust and corrosion.
- Bolt together crossrails and tie wrap fasteners lock down cover and square up frame.
- 4 ft. / 1,2 m shelving on both sides for built-in staging of plants. Metal grid allows for proper drainage.
- ClearView® triple-layer, heat bonded ripstop translucent cover is waterproof and UV-treated inside and out. Provides enhanced illumination designed specifically for plant growth and protection.
- Screen vents at both ends provide airflow and temperature control.
- 1 in. / 2,5 cm 3 Rib All-steel frame
- (1) Translucent polyethylene cover
- (1) Double Zippered Front Door with Vent
- (1) Rear Panel with Vent
- Tie Wrap Fasteners
- 15" / 38,1 cm Auger Anchors
- Complete Hardware Kit
- (2) 4' x 9" / 1,2 x 23 cm Shelving Kits
- Easy Step-by-Step Instructions
The SecureIt Tactical Rapid 6 is a great gun safe and cabinet conversion kit. The modular conversion kit stores 6 sporting rifles and/or traditional long guns individually at their barrel, rail, or magwell.
- 6 Upper Saddles - adjusts individually to support any long gun at their barrel, rail, or magwell
- 3 Modular Grids - grid supports adjustable upper saddles. Each 6" W x 12" H grid connects vertically or horizontally for flexible configurations
- 3 Base Units - interlocking base supports the stock of any long gun within the tiered channel. Each 6" W x 10" D base supports the butt stock of any 2 firearms.
- Made in the USA