Designed for heavy duty and extra heavy duty applications, this bulk shelving features 2" x 2" upright columns and heavy duty 3" beams (beam height). Uprights can be assembled in about 10 minutes per column. Beams click securely into columns. Beams are height adjustable in 2" increments. All units include wire mesh decking. The beams are powder coated orange and uprights are powder coated green per OSHA guidelines.
- 2" x 2" upright columns
- Heavy duty 3" beams (beam height)
- Easily Assembled in minutes
- Beams click securely into columns
- Beams are height adjustable in 2" increments
- Includes wire mesh decking
- Beams are powder coated orange
- Uprights are powder coated green
- 1600 lb Capacity per shelf
- Width (in.): 96"
- Depth (in.): 24"
- Height (in.): 72"
Start seedlings or extend your growing season with the GrowIT® Peak Backyard Greenhouse with Integrated Shelving. This easy-to-assemble, compact backyard greenhouse is constructed with high quality steel and features 4 ft. shelving on both sides for built-in staging of plants.
- Integrated Shelving Inside
- Zippered Door with Vent
- Dimensions: 6 Foot x 8 Foot x 6 Foot 6 Inches
- 1" / 2,5 cm high-grade steel frame with DuPont™ Premium powder coat finish resists chipping, peeling, rust and corrosion.
- Bolt together crossrails and tie wrap fasteners lock down cover and square up frame.
- 4 ft. / 1,2 m shelving on both sides for built-in staging of plants. Metal grid allows for proper drainage.
- ClearView® triple-layer, heat bonded ripstop translucent cover is waterproof and UV-treated inside and out. Provides enhanced illumination designed specifically for plant growth and protection.
- Screen vents at both ends provide airflow and temperature control.
- 1 in. / 2,5 cm 3 Rib All-steel frame
- (1) Translucent polyethylene cover
- (1) Double Zippered Front Door with Vent
- (1) Rear Panel with Vent
- Tie Wrap Fasteners
- 15" / 38,1 cm Auger Anchors
- Complete Hardware Kit
- (2) 4' x 9" / 1,2 x 23 cm Shelving Kits
- Easy Step-by-Step Instructions
Think your gun safe is full? Think again!
Now you can store more guns and access them easier. Lift out the standard plywood rack(s) in your safe and replace it with Rifle Rods. Gun Storage Solutions American-made Rifle Rods individually stabilize each long gun upright, rather than leaning, for more versatility. The Shelf Liner provided in Rifle Rods Starter Kits, adapt any space - gun safe, closet, cabinet or anywhere there is a shelf. Rifle Rods work great for guns with scopes, shotguns, and tactical weapons. Customers report an average increase of 50% more guns.
40 Rifle Rods
- Fits as small as 22 caliber
- Total length - 16"
- Injection molded plastic product
- Ultra-sonically welded VelcroTM coin on top
19" x 60" Shelf Liner
- Industrial grade 100% nylon woven loop fabric.
- Required for use with Rifle Rods.
- Will hold up to 72 long guns with Rifle Rods Add-ons.
- For proper application, attach to wooden shelf with a staple gun or upholstery tacks
These Standard Duty Lockers have 22-gauge doors with vent holes and a die cast handle that secures the door in a closed position and accommodates a standard padlock. All compartments have a flat bottom.
- Dimensions: 15” W x 18” D x 66” H
- Welded steel construction
- Powder coat finish
- Shipped assembled (Handle requires some assembly)
Industrial quality steel platform carts are built to last. Features removable handle for easier transport and storage. Available in a variety of platform sizes to fit your specific requirement.
8 Inch casters
1600 Pound capacity
Width (in.): 36"Learn More
Length (in.): 72"
Maximize your storage space with this easy to assemble boltless shelving. Ideal for light and medium capacity applications. Shelves are height adjustable in 1.5" increments. There are 5 shelves and each shelf has a 375 pound capacity.
- 3/4 inch particle board decking
- 1.5 inch height adjustable increments
- Gray in color
- 375 lb capacity per shelf
- 5 shelves
- Width (in.): 48"
- Depth (in.): 36"
- Height (in.): 84"
The SecureIt Tactical Rapid 6 is a great gun safe and cabinet conversion kit. The modular conversion kit stores 6 sporting rifles and/or traditional long guns individually at their barrel, rail, or magwell.
- 6 Upper Saddles - adjusts individually to support any long gun at their barrel, rail, or magwell
- 3 Modular Grids - grid supports adjustable upper saddles. Each 6" W x 12" H grid connects vertically or horizontally for flexible configurations
- 3 Base Units - interlocking base supports the stock of any long gun within the tiered channel. Each 6" W x 10" D base supports the butt stock of any 2 firearms.
- Made in the USA
Designed for medium and heavy duty applications, this bulk shelving features heavy duty boltless shelving components.
- Easy to assemble
- Shelves are height adjustable in 1.5" increments
- Includes 3/4" particle board decking
- Steel color: Gray
- 3 Shelves with a 600 lb capacity per shelf
- Width (in.): 72"
- Depth (in.): 36"
- Height (in): 84"
Starting off square and level is essential to a successful shed assembly and we recommend that you consider a base kit to self-square the shed and help level the site. Base kits are available for the majority of Arrow sheds. The base kit must be assembled with your selected floor finishing option before you start to build your shed. Use the flooring material that best suits your needs, such as wood, patio blocks, or gravel. The base kit may also be used as a form for pouring concrete.
- Made of durable hot-dipped electro-galvanized steel
- Keeps building and stored items off the ground
- Easy to install
- Includes all hardware
- Does not include floor all finishing materials (If finishing with wood flooring, use exterior-grade plywood, measured to base kit dimensions)
Fits Arrow shed sizes:
- 8' x 8'
- 10' x 8'
- 10' x 9'
The Metal Pegboard Standard Workbench Tool Storage Organizer Kit offers maximum tool board storage versatility and strength with over 10.5 square feet of pegboard storage space. Three 16in x 32in Galvanized metallic pegboard panels combine for a total tool storage area of 48in x 32in. The attractive Metal Pegboards are great for heavy duty toolboard storage needs due to their 20 gauge steel construction that will not warp, fray, or crack and are over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. Wall Control metal pegboards offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in. peg board hooks making this pegboard extremely versatile by giving the user multiple options with tool board accessory selection. Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- (1) 6in Shelf Assembly
- (3) Plastic Hanging Bins with Bin Hanger
- (1) Screwdriver Holder
- (1) Hammer Holder
- Assortment of (20) Additional Hooks and Brackets
- Mounting Hardware is Included
- Metal Pegboard is Galvanized with Black Slotted Toolboard Accessories
- Tools & Tool Sets Not Included
- Over 10 Times Stronger than Conventional Pegboard
- Maximum Pegboard Versatility
- Easy to Install
- Made in USA