The Firewood Rack Adjustable Bracket Kit can adjust to a length that fits your firewood storage needs. By purchasing (2) 2' x 4' lumber you can attach the brackets to each piece of lumber and move the brackets to the desired length that can be customized for log storage and organization. This log rack sets up and takes down in a matter of minutes for easy portability.
- Adjustable Length - Create your own firewood rack with (2) 2' x 4' lumber cut to size.
- Hi-Grade Steel frame - 1-3/8" / 3,5 cm diameter round-tube steel frame with DuPont TM Premium powder coat finish. Resists chipping, peeling, rust and corrosion.
- Sturdy Metal Brackets - Two piece bracket and uprights constructed of high grade powder coated steel that looks great and performs better.
- Assembly Hardware - Ready to build kit includes wood screws to firmly secure bracket end panel uprights to lumber base.
- (2) All Steel Uprights
- Hardware Kit
- Easy step-by-step instructions
- High-quality, impact-resistant polyurethane vents are fully screened to allow air in while turning away bugs and debris.
- Easy installation with 2-sided plastic pop rivets for an airtight seal.
- Rip-stop fabric is engineered for vent install without further ripping or tearing of fabric.
- Electronic Lock can Easily be Programmed by the User with a “Safety Key” Override.
- Available in Black.
- California approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued there under.
- Electronic lock has an easy to read key pad and includes a low battery warning light. Time out period after 3 incorrect combination attempts.
- Back-up trouble key is included.
- Includes a removable mounting plate.
- Locking Plate can be affixed to a location and the safe can be secured to the plate or removed by accessing a bolt inside the safe.
- It can be mounted in the trunk of a car and then moved to a different location in the house or pistol range.
- Safe has pre-drilled holes for mounting to the floor or a shelf with the locking plate.
- Holes have also been included in the top for mounting under the bed or in a locker.
- Exterior Dimensions: 9-7/8" W (25.1cm), 13" D (33cm), 4-1/4" H (10.8cm)
- When storing firearms it is recommended that safes be bolted to the floor, a shelf or wall for added security.
- Plug-in unit with battery backup and continuous digital display
- Level button displays the peak CO level recorded by the alarm since it was last reset
- Loud alarm pattern sounds when unit detects elevated levels of CO, methane, or propane gas
- Direct-plug, 6-foot power cord, and table top mounting options.
- Five-year limited warranty
The Metal Pegboard Pack offers maximum tool board storage versatility and strength. The two 16in x 32in metal pegboard panels combine for a total tool storage area of 32in x 32in, or over 7 Square Feet of pegboard storage space. These attractive Metal Pegboard Panels are also great for heavy duty pegboard storage needs due to their 20 gauge steel construction which makes them over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. The Wall Control metal pegboard panels offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by offering the user multiple options with pegboard hooks, brackets, shelves, and general toolboard and pegboard supplies selection.
- Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors.Over 10 Times Stronger than Conventional Pegboard
- Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility
- Easy to Install. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- Made in USA
This handy mailbox post does not require digging or concreting for installation. It is constructed from heavy-duty galvanized steel with a black powder paint finish. It features an adjustable mailbox support arm, which allows the mailbox to be adjusted to the proper height from the ground. The post accommodates standard and large size mailboxes. The kit includes all assembly and mailbox mounting hardware and instructions.
- Dimensions: 34" x 5.5" x 2.875"
- Weight: 11.75 lbs
The log rack cover is a great way to protect your fire wood for, dirt, debris and weather!
Weather-X ™ fabric with water-resistant backing for extra weather and abrasion protection
Protects against rain, dirt, and birds
Air vents reduce inside condensation and wind lofting
Click-close straps snap over legs to secure cover on the windiest days
1 Year Manufacturer Warranty
- 48 Inches long
- 24 Inches Wide
- 42 Inches High
The Rubbermaid Roughneck post is constructed from durable non-rust polymer. Installation is easy as there is no digging or concrete mixing required. A ground mount and mailbox bracket are included.
- Dimensions: 6.5" x 5.25" x 43.25"
- Weight: 6.25 lbs
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four 30" heavy duty steel augers
- 60' of cable
- Four cable clamps
The Rubbermaid Classic 1 mailbox & post combo features a virtually indestructible double-wall plastic construction. The mailbox has a rear door for safe mail retrieval, keeping children and adults away from traffic. It is large enough to allow magazines to lay flat. Installation is quick and easy.
- Dimensions: 16.75" x 41.125" x 9.5"
- Weight: 14.57 lbs