Think your gun safe is full? Think again!
Now you can store more guns and access them easier. Lift out the standard plywood rack(s) in your safe and replace it with Rifle Rods. Gun Storage Solutions American-made Rifle Rods individually stabilize each long gun upright, rather than leaning, for more versatility. The Shelf Liner provided in Rifle Rods Starter Kits, adapt any space - gun safe, closet, cabinet or anywhere there is a shelf. Rifle Rods work great for guns with scopes, shotguns, and tactical weapons. Customers report an average increase of 50% more guns.
10 Rifle Rods
- Fits as small as 22 caliber
- Total length - 16"
- Injection molded plastic product
- Ultra-sonically welded Velcro coin on top
19" x 15" Shelf Liner
- Industrial grade 100% nylon woven loop fabric
- Required for use with Rifle Rods
- Will hold up to 18 long guns with Rifle Rods Add-ons.
- For proper application, attach to wooden shelf with a staple gun or upholstery tacks
- Electronic Lock can Easily be Programmed by the User with a “Safety Key” Override.
- Available in Black.
- California approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued there under.
- Electronic lock has an easy to read key pad and includes a low battery warning light. Time out period after 3 incorrect combination attempts.
- Back-up trouble key is included.
- Includes a removable mounting plate.
- Locking Plate can be affixed to a location and the safe can be secured to the plate or removed by accessing a bolt inside the safe.
- It can be mounted in the trunk of a car and then moved to a different location in the house or pistol range.
- Safe has pre-drilled holes for mounting to the floor or a shelf with the locking plate.
- Holes have also been included in the top for mounting under the bed or in a locker.
- Exterior Dimensions: 9-7/8" W (25.1cm), 13" D (33cm), 4-1/4" H (10.8cm)
- When storing firearms it is recommended that safes be bolted to the floor, a shelf or wall for added security.
The Rubbermaid Roughneck post is constructed from durable non-rust polymer. Installation is easy as there is no digging or concrete mixing required. A ground mount and mailbox bracket are included.
- Dimensions: 6.5" x 5.25" x 43.25"
- Weight: 6.25 lbs
The ShelterLogic 12ft. x 12ft. x 12ft. triangle sun shade sail is the do it yourself shade product that allows you to create your own unique shade design. Sun shade sails easily attach to any sturdy connection point to provide sun protection and personal design where you need it. Each sun shade sail is shipped ready to install and includes a basic hardware kit for easy attachment to the house, building, tree or post.
Sun shade sails offer an excellent shade solution for backyard decks, patios, pools, play areas, camping, or any place shade is needed. Combine more than one Sun Shade Sail or mix shapes to create your own unique outdoor shade and living space.
- Long life, 230 GSM, knitted polyethylene allows rain to pass through so water will not collect or pool
- Advanced engineered fabric blocks 90 percent of harmful UVA and UVB rays yet is remarkably breathable allowing air to circulate
- Reinforced, stitched corners with steel fittings attach quick and easy to mounting points
- Basic install hardware kit includes rope, bolt, attachment hardware, and turnbuckle for each corner connection
- Attaches quickly in just a few minutes
The Rubbermaid Classic 1 mailbox & post combo features a virtually indestructible double-wall plastic construction. The mailbox has a rear door for safe mail retrieval, keeping children and adults away from traffic. It is large enough to allow magazines to lay flat. Installation is quick and easy.
- Dimensions: 16.75" x 41.125" x 9.5"
- Weight: 14.57 lbs
The Metal Pegboard Pack offers maximum tool board storage versatility and strength. The two 16in x 32in metal pegboard panels combine for a total tool storage area of 32in x 32in, or over 7 Square Feet of pegboard storage space. These attractive Metal Pegboard Panels are also great for heavy duty pegboard storage needs due to their 20 gauge steel construction which makes them over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. The Wall Control metal pegboard panels offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by offering the user multiple options with pegboard hooks, brackets, shelves, and general toolboard and pegboard supplies selection.
- Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors.Over 10 Times Stronger than Conventional Pegboard
- Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility
- Easy to Install. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- Made in USA
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four 30" heavy duty steel augers
- 60' of cable
- Four cable clamps
- Plug-in unit with battery backup and continuous digital display
- Level button displays the peak CO level recorded by the alarm since it was last reset
- Loud alarm pattern sounds when unit detects elevated levels of CO, methane, or propane gas
- Direct-plug, 6-foot power cord, and table top mounting options.
- Five-year limited warranty
Increase the roof strength of your shed by 50% to help withstand heavy snow accumulation. Our roof strengthening kits fit most Arrow buildings and can be installed on new or existing buildings.
- Fits Arrow shed sizes: 6' x 5' and 8' x 6'
- Made of electro-galvanized steel
- All necessary hardware included
- Color: Gray
The Windmere large size mailbox gives you durability and elegance with the heavy duty steel along with decorative frame and antique gold finish hardware.
- Dimensions: 11.375" x 9" x 22.5"
- Weight: 9.1 lbs