Regular Price: $69.99
Special Price: $49.99
The pistol safe from Bear Arms is the perfect option for someone wanting to keep their pistol locked up, but easily accessable in a time of need. With customized security codes and and optional silent mode so as not to alert anyone when you are accessing your safe.
- Customized security code
- Back-up key override
- Optional silent mode
- Over 12 million possible combinations
- High strength lock mechanism
- 16-gauge steel
- Protective interior
- Tamper proof protection
- Battery powered for maximum security & portability
Outer Safe Dimensions:
- 11.5 inches long
- 9 inches wide
- 7 inches high
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four 30" heavy duty steel augers
- 60' of cable
- Four cable clamps
Regular Price: $49.99
Special Price: $44.99
- Electronic Lock can Easily be Programmed by the User with a “Safety Key” Override.
- Available in Black.
- California approved firearms safety device that meets the requirements of California Penal Code Section 12088 and the regulations issued there under.
- Electronic lock has an easy to read key pad and includes a low battery warning light. Time out period after 3 incorrect combination attempts.
- Back-up trouble key is included.
- Includes a removable mounting plate.
- Locking Plate can be affixed to a location and the safe can be secured to the plate or removed by accessing a bolt inside the safe.
- It can be mounted in the trunk of a car and then moved to a different location in the house or pistol range.
- Safe has pre-drilled holes for mounting to the floor or a shelf with the locking plate.
- Holes have also been included in the top for mounting under the bed or in a locker.
- Exterior Dimensions: 9-7/8" W (25.1cm), 13" D (33cm), 4-1/4" H (10.8cm)
- When storing firearms it is recommended that safes be bolted to the floor, a shelf or wall for added security.
Think your gun safe is full? Think again!
Now you can store more guns and access them easier. Lift out the standard plywood rack(s) in your safe and replace it with Rifle Rods. Gun Storage Solutions American-made Rifle Rods individually stabilize each long gun upright, rather than leaning, for more versatility. The Shelf Liner provided in Rifle Rods Starter Kits, adapt any space - gun safe, closet, cabinet or anywhere there is a shelf. Rifle Rods work great for guns with scopes, shotguns, and tactical weapons. Customers report an average increase of 50% more guns.
10 Rifle Rods
- Fits as small as 22 caliber
- Total length - 16"
- Injection molded plastic product
- Ultra-sonically welded Velcro coin on top
19" x 15" Shelf Liner
- Industrial grade 100% nylon woven loop fabric
- Required for use with Rifle Rods
- Will hold up to 18 long guns with Rifle Rods Add-ons.
- For proper application, attach to wooden shelf with a staple gun or upholstery tacks
An ideal way to store and protect important documents and materials
- UL rated up to 1/2 hour at 1,550 degrees.
- Design features a key lock for privacy and hang rail to accommodate 40 hanging file folders.
- File has .61 cubic foot capacity and weighs 31 lbs.
- Interior dimensions are 10 3/8"H x 12"W x 8 1/2"D.
- Backed by the manufacturer's 1-year limited warranty.
- High-quality, impact-resistant polyurethane vents are fully screened to allow air in while turning away bugs and debris.
- Easy installation with 2-sided plastic pop rivets for an airtight seal.
- Rip-stop fabric is engineered for vent install without further ripping or tearing of fabric.
- Plug-in unit with battery backup and continuous digital display
- Level button displays the peak CO level recorded by the alarm since it was last reset
- Loud alarm pattern sounds when unit detects elevated levels of CO, methane, or propane gas
- Direct-plug, 6-foot power cord, and table top mounting options.
- Five-year limited warranty
The Firewood Rack Adjustable Bracket Kit can adjust to a length that fits your firewood storage needs. By purchasing (2) 2' x 4' lumber you can attach the brackets to each piece of lumber and move the brackets to the desired length that can be customized for log storage and organization. This log rack sets up and takes down in a matter of minutes for easy portability.
- Adjustable Length - Create your own firewood rack with (2) 2' x 4' lumber cut to size.
- Hi-Grade Steel frame - 1-3/8" / 3,5 cm diameter round-tube steel frame with DuPont TM Premium powder coat finish. Resists chipping, peeling, rust and corrosion.
- Sturdy Metal Brackets - Two piece bracket and uprights constructed of high grade powder coated steel that looks great and performs better.
- Assembly Hardware - Ready to build kit includes wood screws to firmly secure bracket end panel uprights to lumber base.
- (2) All Steel Uprights
- Hardware Kit
- Easy step-by-step instructions
- Dimensions: 11.375" x 9" x 22.5"
- Weight: 9.1 lbs
The Metal Pegboard Pack offers maximum tool board storage versatility and strength. The two 16in x 32in metal pegboard panels combine for a total tool storage area of 32in x 32in, or over 7 Square Feet of pegboard storage space. These attractive Metal Pegboard Panels are also great for heavy duty pegboard storage needs due to their 20 gauge steel construction which makes them over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. The Wall Control metal pegboard panels offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by offering the user multiple options with pegboard hooks, brackets, shelves, and general toolboard and pegboard supplies selection.
- Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors.Over 10 Times Stronger than Conventional Pegboard
- Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility
- Easy to Install. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- Made in USA