These Standard Duty Lockers have 22-gauge doors with vent holes and a die cast handle that secures the door in a closed position and accommodates a standard padlock. All compartments have 2 side hooks and a flat bottom.
- Dimensions: 15” W x 18” D x 66” H
- Welded steel construction
- Powder coat finish
- Shipped assembled (Handle requires some assembly)
If your Arrow storage building has sliding doors, use our tune-up kit to keep them functioning smoothly.
- Fits all Arrow sliding door storage buildings
- Four lower door guides
- Four door slides
- Two door handles
- Four #10B x 1/2" screws
- Eight #8-32 3/8" machine screws
- Eight #8-32 hex nuts
- Instructions (no manual)
Model Number SSR68101 Nominal Size 10' x 10' Storage Area 92 sq. ft. Recommended Foundation 121" W x 114.5" D Exterior Dimensions 123.25" W x 117" D x 70.88" H Interior Dimensions 118.25" W x 111.75" D x 69.63" H Door Opening 55.5" W x 58" H Wall Height 60"
Floor kit sold separately.Learn More
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four steel corner gusset and perimeter clips
- Lag bolts building directly into concrete slabs
- 1/4" masonry drill bit
All-purpose canopy provides temporary seasonal storage and protection from sun and rain. Perfect for outdoor art shows, flea markets, weddings, picnics or vehicle storage.
- Heavy duty 1 3/8" all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Triple layer, chemically heat bonded, enhanced weave, rip-stop, 100% waterproof, polyethylene cover
- UV treated inside and out with added fade blockers, anti-aging, anti-fungal agents
- One piece fitted full valance cover
- Bungee cords
- Foot plates
- Temporary spike anchors
Adjust the length and height of your firewood rack with a Firewood Rack Bracket Kit. Made with a durable, molded ABS plastic that is tough enough to withstand corrosion, cracking, and peeling from any kind of weather. This is a "tool free" assembly where all that is required is (6) 2'x 4' lumber purchased separately and cut to your desired length to organize and store wood.
- Innovative Design - Specially designed to firmly fit 2 x 4 lumber for a sturdier rack construction.
- No Tools Assembly - Tool free easy set up and take down. Cut 2 x 4 lumber to your desired length. Fully adjustable design.
- Impact Resistant Polymer -Tough and durable, our brackets are molded ABS plastic that will not rust, corrode, crack or peel and really holds up to the elements.
- Purchase 2' x 4' Lumber - (6) 2' x 4' lumber cut to desired length is required to use Firewood Rack Brackets.
- 2-pc ABS Plastic Holders
- Easy step-by-step instructions
The Wall Control Slotted Tool Board Deluxe Hook Assortment includes 26 durable steel slotted toolboard hooks and brackets that feature a scratch and rust resistant baked-on white finish. These more secure and stable toolboard hooks are for use with the slots found in all Wall Control Metal Pegboard tool board panels. Wall Control Slotted Toolboard hooks offer a patented engagement that requires two deliberate motions up-and-down to engage and disengage the hooks. This feature makes Wall Control Slotted Tooboard hooks less likely to fall out of the tool board than conventional peg hooks that can easily fall off when tools are removed. Although Wall Control Metal Pegboard Panels will accept conventional 1/4in pegboard accessories as well as Wall Control Slotted Accessories the Slotted Secure Tool Board Hooks included in this set are only for use with Wall Control Metal Pegboard Panels and Tool Boards. Wall Control Slotted Tool Board Hooks offer a baked-on color finish that is attractive and rust resistant for long lasting tool storage aesthetic appeal.
- (10) Standard Slotted Toolboard Hooks, 3/4in Reach
- (4) Medium Slotted Toolboard Hooks, 1-7/8in Reach
- (4) Medium 90 Degree Toolboard Hooks
- (2) Slotted Toolboard U-Hooks, 3in Reach
- (2) Slotted Toolboard C-Brackets, 1in x 1in
- (2) Slotted Toolboard C-Brackets, 2in x 2in
- (1) Extended Toolboard Hook, 9in Reach
- (1) Slotted Toolboard Handle Hammer Holder, 1-1/4in
- More secure tool board hook engagement over conventional peg board pegs.
- Made in USA
To protect your stored items, you should consider having a floor above the base in your shed. If you are creating your own base, we recommend that you install a floor using an Arrow floor frame kit. If you are using our base kit, your floor is installed directly on the base kit and you do not need a separate floor kit (although you could consider it). An Arrow floor frame kit offers an easy way to construct a raised floor. This is especially useful if your base is dirt, gravel or grass. The Arrow floor frame kit is installed after your shed is completely assembled. The floor beams slot easily into the frame of your shed, providing an ideal framework for finishing with 5/8" exterior-grade plywood.
Fits Arrow Shed sizes:
- 8' x 8'
- 10' x 7'
- 10' x 8'
- 10' x 9'
- 10' x 10'
DOES NOT FIT THE HOMESTEAD 10' x 8'
The Arrow floor frame kit:
- Assembles in minutes
- Keeps stored items off the ground
- Has frames made of strong, hot-dipped galvanized steel
- Does not include plywood (Use 5/8” exterior-grade plywood, measured to floor frame dimensions)
Industrial quality steel platform carts are built to last. Features removable handle for easier transport and storage. Available in a variety of platform sizes to fit your specific requirement.
8 Inch casters
1600 Pound capacity
Width (in.): 36"Learn More
Length (in.): 72"
- Built for use on any of our fabric covered sheds, instant garages or storage shelters, the Easy Hook Anchoring System works well wherever you plan to install your shelter.
- Made of solid steel and heavy-gauge wrapped wire, Easy Hook works in grass, rocky soil, gravel or asphalt.
- Full kit includes Easy Hook Anchors, drive rod and hardware tie-down.
- Manufacturer recommends (1) one Easy Hook anchor per leg or (2) per rib. Check your installation manual for more details on proper anchoring.