- Genuine authentic anchoring for shelters, canopies and instant garages.
- Innovative corkscrew design digs in fast and holds on tight. Recommended for garages, sheds and larger canopies.
- Portable and reusable - heavy-duty, powder-coated steel construction will not rust, corrode, chip or peel.
- Quick clamp-on wire tie-downs are installed in minutes to legs and anchors with a rock solid connection.
- Proper anchoring of your shelter is mandatory. Make sure it is anchored securely to manufacturer specifications.
- ShelterLogic recommends (1) one ShelterAuger per leg.
$79.97The Monkey Bars 4 Bike Storage Rack MB-2 is the most versatile bike rack on the market today. Monkey Bars has developed a 15 minute installation bike rack that will securely store 4 Mt. Bikes off the garage floor. Only 4 screws into 2 studs 48” apart, and you’re finished. No longer do you have to hang bikes where studs exist. This gives you the versatility to store bikes used less often off the ground and clear up valuable floor space. This rack does not limit you on the size of bike; store kid's bikes, road bikes, and adult Mt. bikes. Get organized today by purchasing your Monkey Bars Bike Rack. Learn More
The Bike Rack 6 by Monkey Bars securely stores 6 bikes in a compact space. The Bike Rack's ability to store 6 bikes is designed for long term storage, freeing up valuable floor space in your garage. For daily use, it is recommended to store up to 4 bikes, making it easier to get the bikes on and off the rack. The rack is constructed of industrial steel with a gray powder coat finish built to endure years of heavy use. The hooks snap and slide along the bar allowing you to choose where to place the bikes along the rack. The hooks also contain a plastic coating to prevent scratches on your bikes. The rack is 48" wide allowing you to drill the brackets into the wall studs. This rack is strong enough to hold up to 200 lbs. Get your bikes up off the floor today, giving you more room for your cars!
2 - Shed Brackets
1 - 51" Monkey Bar
6 - J Hooks
1 - Hardware BagLearn More
- High-quality, impact-resistant polyurethane vents are fully screened to allow air in while turning away bugs and debris.
- Easy installation with 2-sided plastic pop rivets for an airtight seal.
- Rip-stop fabric is engineered for vent install without further ripping or tearing of fabric.
Organize all your yard tools with the Monkey Bar Small Yard Tool Rack. This rack will securely store 10-15 yard tools off the floor. Only 4 screws into 2 studs 24” to 32” apart, and you’re finished. No longer do you have to hang yard tools on nails on the wall where studs exist. This gives you the versatility to store everything off the ground and regain valuable floor space. This rack does not limit you on the size of yard tools; you can hang a wheel barrow, shovels, rakes, weed eaters, leaf blowers, and hedge clippers. Purchase your Yard Tool Rack today.
2 - Shed Brackets
1 - 35" Monkey Bar
1 - 12" Hook
1 - 3" Double Hook
1 - 3" Wide Hook
1 - 5" Wide Hook
1 - J Hook
1 - Hardware BagLearn More
- Holds 3/5 Cord / 2,2 cubic meters.
- Complete wood storage rack and cover in one.
- Easy assembly, all steel frame rack with black powder coat finish.
- Keeps wood off of the ground eliminating bugs, mold growth, and rotting.
- Open Air Design delivers excellent ventilation, perfect for seasoning firewood.
- Waterproof cover adjusts to fit split wood up to 24" / 61 cm in length.
- Adjustable cover slides up and down to fit height of wood stack.
- Round 1 1/2 in. tube frame
- Black Polyester Cover
- Instruction Manual
- Rack Frame 142.7 in x 46.6 in. x 15.5 in.
Extend the life of your tools by keeping them inside and off the ground. This hanging rack can be easily mounted on a wall in your shed, garage or basement to accommodate long-handled tools and organize smaller tools, such as screwdrivers, pliers and other hand tools.
- Two 25-1/2" channels
- Five separate large-tool holders that snap into the channel
- One small-tool holder that snaps into the channel
- 4 Easy Hook cast steel anchors and drive rod included. They take a bite and hold on tight. Effective in any soil condition.
- Heavy duty steel ratchet hook with webbing ensures a solid frame-to-anchor connection.
- Rugged plated metal ratchets with sturdy webbing and beefy S-Hook connectors make the tightening process quick and easy.
- The quick-attach Drill Guide Template clips right to the frame for easy location of the ratchet connection point.
Starting off square and level is essential to a successful shed assembly and we recommend that you consider a base kit to self-square the shed and help level the site. Base kits are available for the majority of Arrow sheds. The base kit must be assembled with your selected floor finishing option before you start to build your shed. Use the flooring material that best suits your needs, such as wood, patio blocks, or gravel. The base kit may also be used as a form for pouring concrete.
- Made of durable hot-dipped electro-galvanized steel
- Keeps building and stored items off the ground
- Easy to install
- Includes all hardware
- Does not include floor all finishing materials (If finishing with wood flooring, use exterior-grade plywood, measured to base kit dimensions)
Fits Arrow shed sizes:
- 4' x 10'
- 8' x 6'
- 10' x 6'
Our storage totes are produced with recycled material and a propietary blend of high impact resin that gives the can INCREDIBLE strength. Using recycled material is good for the environment. We actually use up to 100% recycled material in some of our products. And we do it without compromising quality or durability.Learn More