Adjust the length and height of your firewood rack with a Firewood Rack Bracket Kit. Made with a durable, molded ABS plastic that is tough enough to withstand corrosion, cracking, and peeling from any kind of weather. This is a "tool free" assembly where all that is required is (6) 2'x 4' lumber purchased separately and cut to your desired length to organize and store wood.
- Innovative Design - Specially designed to firmly fit 2 x 4 lumber for a sturdier rack construction.
- No Tools Assembly - Tool free easy set up and take down. Cut 2 x 4 lumber to your desired length. Fully adjustable design.
- Impact Resistant Polymer -Tough and durable, our brackets are molded ABS plastic that will not rust, corrode, crack or peel and really holds up to the elements.
- Purchase 2' x 4' Lumber - (6) 2' x 4' lumber cut to desired length is required to use Firewood Rack Brackets.
- 2-pc ABS Plastic Holders
- Easy step-by-step instructions
If your Arrow storage building has sliding doors, use our tune-up kit to keep them functioning smoothly.
- Fits all Arrow sliding door storage buildings
- Four lower door guides
- Four door slides
- Two door handles
- Four #10B x 1/2" screws
- Eight #8-32 3/8" machine screws
- Eight #8-32 hex nuts
- Instructions (no manual)
- Genuine authentic anchoring for shelters, canopies and instant garages.
- Innovative corkscrew design digs in fast and holds on tight. Recommended for garages, sheds and larger canopies.
- Portable and reusable - heavy-duty, powder-coated steel construction will not rust, corrode, chip or peel.
- Quick clamp-on wire tie-downs are installed in minutes to legs and anchors with a rock solid connection.
- Proper anchoring of your shelter is mandatory. Make sure it is anchored securely to manufacturer specifications.
- ShelterLogic recommends (1) one ShelterAuger per leg.
The Bike Rack 6 by Monkey Bars securely stores 6 bikes in a compact space. The Bike Rack's ability to store 6 bikes is designed for long term storage, freeing up valuable floor space in your garage. For daily use, it is recommended to store up to 4 bikes, making it easier to get the bikes on and off the rack. The rack is constructed of industrial steel with a gray powder coat finish built to endure years of heavy use. The hooks snap and slide along the bar allowing you to choose where to place the bikes along the rack. The hooks also contain a plastic coating to prevent scratches on your bikes. The rack is 48" wide allowing you to drill the brackets into the wall studs. This rack is strong enough to hold up to 200 lbs. Get your bikes up off the floor today, giving you more room for your cars!
2 - Shed Brackets
1 - 51" Monkey Bar
6 - J Hooks
1 - Hardware BagLearn More
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four steel corner gusset and perimeter clips
- Lag bolts building directly into concrete slabs
- 1/4" masonry drill bit
The Wall Control Slotted Tool Board Deluxe Hook Assortment includes 26 durable steel slotted toolboard hooks and brackets that feature a scratch and rust resistant baked-on white finish. These more secure and stable toolboard hooks are for use with the slots found in all Wall Control Metal Pegboard tool board panels. Wall Control Slotted Toolboard hooks offer a patented engagement that requires two deliberate motions up-and-down to engage and disengage the hooks. This feature makes Wall Control Slotted Tooboard hooks less likely to fall out of the tool board than conventional peg hooks that can easily fall off when tools are removed. Although Wall Control Metal Pegboard Panels will accept conventional 1/4in pegboard accessories as well as Wall Control Slotted Accessories the Slotted Secure Tool Board Hooks included in this set are only for use with Wall Control Metal Pegboard Panels and Tool Boards. Wall Control Slotted Tool Board Hooks offer a baked-on color finish that is attractive and rust resistant for long lasting tool storage aesthetic appeal.
- (10) Standard Slotted Toolboard Hooks, 3/4in Reach
- (4) Medium Slotted Toolboard Hooks, 1-7/8in Reach
- (4) Medium 90 Degree Toolboard Hooks
- (2) Slotted Toolboard U-Hooks, 3in Reach
- (2) Slotted Toolboard C-Brackets, 1in x 1in
- (2) Slotted Toolboard C-Brackets, 2in x 2in
- (1) Extended Toolboard Hook, 9in Reach
- (1) Slotted Toolboard Handle Hammer Holder, 1-1/4in
- More secure tool board hook engagement over conventional peg board pegs.
- Made in USA
To protect your stored items, you should consider having a floor above the base in your shed. If you are creating your own base, we recommend that you install a floor using an Arrow floor frame kit. If you are using our base kit, your floor is installed directly on the base kit and you do not need a separate floor kit (although you could consider it). An Arrow floor frame kit offers an easy way to construct a raised floor. This is especially useful if your base is dirt, gravel or grass. The Arrow floor frame kit is installed after your shed is completely assembled. The floor beams slot easily into the frame of your shed, providing an ideal framework for finishing with 5/8" exterior-grade plywood.
Fits Arrow Shed sizes:
- 8' x 8'
- 10' x 7'
- 10' x 8'
- 10' x 9'
- 10' x 10'
DOES NOT FIT THE HOMESTEAD 10' x 8'
The Arrow floor frame kit:
- Assembles in minutes
- Keeps stored items off the ground
- Has frames made of strong, hot-dipped galvanized steel
- Does not include plywood (Use 5/8” exterior-grade plywood, measured to floor frame dimensions)
Model Number SSR68101 Nominal Size 10' x 10' Storage Area 92 sq. ft. Recommended Foundation 121" W x 114.5" D Exterior Dimensions 123.25" W x 117" D x 70.88" H Interior Dimensions 118.25" W x 111.75" D x 69.63" H Door Opening 55.5" W x 58" H Wall Height 60"
Floor kit sold separately.Learn More
The new Quick Clamp Canopy™ Tilt Mount cover adjusts with the sun for all day shade protection!
- Innovative patent pending pop-up frame design.
- High impact injection molded connectors.
- Shock cord side frame poles go up in seconds.
- Four-position vertical adjustment to a max of 9”/22,9 cm
- Fits tables up to 10 ft. / 3, 0 m long.
- Adjustable tilt-mount bracket clamp mounting system with pivot feature for easy attachment to many surfaces.
- Sun protection from any direction with 3-adjustable shade positions.
- UV treated, mildew resistant, water repellent desert bronze polyester fabric cover.
- Provides more than 75 square feet / 7m2 of coverage from sun and light rain.
- Super strong hook and loop cover attachment.
- CPAI-84 Fire-Rated.
The ShelterLogic Full Length Firewood Rack Cover in 8ft length, keeps your firewood dry and protected all year round. Easily access log storage using the zipper closure which reaches to approximately the full height of the cover and firewood rack.
- Rip-Stop Fabric Cover - High quality 7.5 oz. polyethylene fabric cover. Zipper closure allows for easy access to wood. Full length for year round protection.
- UV Treated Fabric - Anti-fungal properties reduce mold and mildew.
- Fits Most Frames -2-zipper closure allows for easy access to wood.
- 8ft full length fabric cover