Start seedlings or extend your growing season with the GrowIT® Peak Backyard Greenhouse with Integrated Shelving. This easy-to-assemble, compact backyard greenhouse is constructed with high quality steel and features 4 ft. shelving on both sides for built-in staging of plants.
- Integrated Shelving Inside
- Zippered Door with Vent
- Dimensions: 6 Foot x 8 Foot x 6 Foot 6 Inches
- 1" / 2,5 cm high-grade steel frame with DuPont™ Premium powder coat finish resists chipping, peeling, rust and corrosion.
- Bolt together crossrails and tie wrap fasteners lock down cover and square up frame.
- 4 ft. / 1,2 m shelving on both sides for built-in staging of plants. Metal grid allows for proper drainage.
- ClearView® triple-layer, heat bonded ripstop translucent cover is waterproof and UV-treated inside and out. Provides enhanced illumination designed specifically for plant growth and protection.
- Screen vents at both ends provide airflow and temperature control.
- 1 in. / 2,5 cm 3 Rib All-steel frame
- (1) Translucent polyethylene cover
- (1) Double Zippered Front Door with Vent
- (1) Rear Panel with Vent
- Tie Wrap Fasteners
- 15" / 38,1 cm Auger Anchors
- Complete Hardware Kit
- (2) 4' x 9" / 1,2 x 23 cm Shelving Kits
- Easy Step-by-Step Instructions
The image above may not be the color of the actual product.
- Heavy duty all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Stylish Decorative Series
- Polyester fabric cover with full valance and closed end design
- UV treated inside and out with added fade blockers, anti-aging, anti-fungal agents
- Polyurethane inside lining, double stitched and seam sealed with waterproof tape for optimal water resistance and drip-free seams
- One piece fitted full valance cover
- Foot plates
- Temporary spike anchors
The Classic Accessories Log Splitter Cover keeps your machine protected from dirt, debris and the weather.
Storm-X™ fabric with water‑resistant backing for maximum strength, abrasion and weather protection
Fast protection when storing at home or on the job
Protects against UV damage, rain, dirt, birds and tree sap
Elastic hem cord in bottom hem for a quick, custom fit
Integrated storage bag
1 Year Warranty
- High-quality, impact-resistant polyurethane vents are fully screened to allow air in while turning away bugs and debris.
- Easy installation with 2-sided plastic pop rivets for an airtight seal.
- Rip-stop fabric is engineered for vent install without further ripping or tearing of fabric.
- 12 inches by 12 inches
The Horse Saddle Rack allows you to store two horse saddles, ropes, leads, or bridles. This is a complete saddle rack system. The Horse Saddle Rack from Monkey Bars is the industry’s most versatile saddle rack. It will hold English, Western, breezing, and racing saddles. This horse saddle rack will bring organization to any tack room, barn, or trailer. The wall mount saddle rack gives you the ability to store all of your equine gear in one place. Not only does this rack hold two saddles, it comes with hooks to hold bridles, ropes, lassos, leads, lariats, hackamores, halters, spurs, saddlebags, blankets, chaps, or a cowboy hat. The hooks slide easily across the Monkey Bar, allowing you to customize it to fit your needs. The saddle holders are designed to keep the shape and form of your saddle as it is stored. Each rack is made from the strongest and most durable materials. The Saddle Rack is made of industrial steel, allowing it to hold the heaviest saddle. The wall mounted saddle rack is powder coated which will never scratch and the color will hide dust. Each hook is coated in rubber to protect your gear. All orders placed before 3 pm MST will be shipped out the same day. Saddle storage has never been easier.
2 - Single Bar Brackets
1 - 50" Monkey Bar
2 - Saddle Holders
1 - 12" Double Hook
1 - 5" Double Hook
1 - 5" Single Hook
1 - Hardware BagLearn More
Organize all your yard tools with the Monkey Bar Yard Tool Rack 20. This rack will securely store 12-20 yard tools off the floor. Only 4 screws into 2 studs 48” apart, and you’re finished. No longer do you have to hang yard tools on nails on the wall where studs exist; this gives you the versatility to store everything off the ground and regain valuable floor space. This rack does not limit you on the size of yard tools; you can hang a wheel barrow, shovels, rakes, weed eaters, leaf blowers, and hedge clippers. Purchase your Yard Tool Rack today.
2 - Shed Brackets
1 - 51" Monkey Bars
1 - 12" Hook
2 - 3" Double Hook
1 - 3" Single Hook
1 - 3" Wide Hook
2 - 5" Wide Hook
1 - J Hook
1 - Hardware BagLearn More
Our high-gambrel roof style Lexington storage building gives you plenty of storage. Give your garage back to your car and organize lawn and garden equipment, patio furniture and much more in the durable Lexington.
- Best value storage solution
- Durable baked-on enamel finish
- Interior height over 7 feet tall
- Floor kit sold separately.
Specifications Model Number LX1014 Nominal Size 10' x 14' Storage Area 129 sq. ft. Interior Dimensions 118 1/4" W x 157 1/2" D x 86 5/8" H Wall Height 62" Door Opening 55 1/2" W x 60" H Foundation Size 121" W x 160 1/4" D
The Metal Pegboard Master Workbench Tool Storage Organizer Kit offers maximum tool board storage versatility and strength with over 21 square feet of pegboard storage space. Six 16in x 32in Gray powder-coated pegboard panels combine for a total tool storage area of 96in x 32in. The attractive Metal Pegboards are great for heavy duty toolboard storage needs due to their 20 gauge steel construction that will not warp, fray, or crack and are over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. Wall Control metal pegboards offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by giving the user multiple options with tool board accessory selection. Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors. Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- (6) Gray Powder-Coated Metal Pegboards 32in x 16in (Covers 96in x 32in Installed)
- (1) 9in Shelf Assembly
- (2) 9in Shelf Dividers
- (1) 6in Shelf Assembly
- (15) Plastic Hanging Bins with Hangers
- (1) Dowel Rod and 4in Shelf Assembly
- (1) Spray Can Holder (Holds 4 Cans)
- (2) Screwdriver Holders (Holds 6 Each)
- (2) Hammer Holders
- Assortment of (22) Additional Hooks and Brackets
- Mounting Hardware Included
- Metal Pegboard
- Slotted Toolboard Accessories
- Tools & Tool Sets Not Included
- Over 10 Times Stronger than Conventional Pegboard
- Easy to Install
- Made in USA
Anchors must be permanently attached after assembly to keep you and your shed secure and safe. Choose the appropriate anchoring kit for your base as part of the preparation phase of shed construction. Arrow offers several permanent anchoring options, including concrete ones. (If you need to leave your building before it is completely assembled, you will need to temporarily anchor the corners of the shed to your base, and place weights, such as patio blocks or sandbags, on top of the floor frame.)
- Four 30" heavy duty steel augers
- 60' of cable
- Four cable clamps
Attractive, horizontal siding combines with a vinyl coating to give you a handsome and durable storage solution. A roomy, gable roof allows for plenty of headroom with space to work, hang tools and store equipment.
- Premium vinyl-coated steel
- 5 times thicker than standard finishes
- Easy to assemble
- Over 7 feet tall
- Floor kit sold separately.
Model Number VM1012 Nominal Size 10' x 12' Storage Area 115 sq. ft. Interior Dimensions 118 1/4" W x 140 1/2" D x 84 3/4" H Wall Height 66 1/2" Door Opening 55 1/2" W x 64 1/2" H Foundation Size 121" W x 143 1/4" D