Garage - Shop
- Genuine authentic anchoring for shelters, canopies and instant garages.
- Innovative corkscrew design digs in fast and holds on tight. Recommended for garages, sheds and larger canopies.
- Portable and reusable - heavy-duty, powder-coated steel construction will not rust, corrode, chip or peel.
- Quick clamp-on wire tie-downs are installed in minutes to legs and anchors with a rock solid connection.
- Proper anchoring of your shelter is mandatory. Make sure it is anchored securely to manufacturer specifications.
- ShelterLogic recommends (1) one ShelterAuger per leg.
This kit will make a 10x20 canopy an enclosed unit. It is not the entire unit.
- Converts your 10' x 20' Max AP Canopy to a fully enclosed shelter.
- Triple-layer, ripstop white polyethylene cover is 100% waterproof. Cover is UV treated inside and out with heat-sealed seams for added protection against the elements.
- 50+UPF rating blocks more than 98% of UV harmful rays. UPF represents Ultraviolet Protection Factor and indicates how much of the sun's radiation is absorbed. 50+UPF is the highest fabric rating for radiation exposure. Only 2% of the UV rays will penetrate through the shade fabric.
- Enhanced visibility clear polyethylene windows.
- Great for seasonal storage or backyard events.
- 10' x 20' White Canopy Enclosure Kit
- (1) Solid Rear Panel
- (2) Solid Wide Walls
- (1) Solid double zippered door Panel
- Bungee Cords
- Easy Step-by-Step Instructions
All-purpose canopy provides temporary seasonal storage and protection from sun and rain. Perfect for outdoor art shows, flea markets, weddings, picnics or vehicle storage.
- Heavy duty 1 3/8" all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Triple layer, chemically heat bonded, enhanced weave, rip-stop, 100% waterproof, polyethylene cover
- UV treated inside and out with added fade blockers, anti-aging, anti-fungal agents
- One piece fitted full valance cover
- Bungee cords
- Foot plates
- Temporary spike anchors
The Bike Rack 6 by Monkey Bars securely stores 6 bikes in a compact space. The Bike Rack's ability to store 6 bikes is designed for long term storage, freeing up valuable floor space in your garage. For daily use, it is recommended to store up to 4 bikes, making it easier to get the bikes on and off the rack. The rack is constructed of industrial steel with a gray powder coat finish built to endure years of heavy use. The hooks snap and slide along the bar allowing you to choose where to place the bikes along the rack. The hooks also contain a plastic coating to prevent scratches on your bikes. The rack is 48" wide allowing you to drill the brackets into the wall studs. This rack is strong enough to hold up to 200 lbs. Get your bikes up off the floor today, giving you more room for your cars!
2 - Shed Brackets
1 - 51" Monkey Bar
6 - J Hooks
1 - Hardware BagLearn More
The ShelterLogic Full Length Firewood Rack Cover in 8ft length, keeps your firewood dry and protected all year round. Easily access log storage using the zipper closure which reaches to approximately the full height of the cover and firewood rack.
- Rip-Stop Fabric Cover - High quality 7.5 oz. polyethylene fabric cover. Zipper closure allows for easy access to wood. Full length for year round protection.
- UV Treated Fabric - Anti-fungal properties reduce mold and mildew.
- Fits Most Frames -2-zipper closure allows for easy access to wood.
- 8ft full length fabric cover
The Firewood Rack Adjustable Bracket Kit can adjust to a length that fits your firewood storage needs. By purchasing (2) 2' x 4' lumber you can attach the brackets to each piece of lumber and move the brackets to the desired length that can be customized for log storage and organization. This log rack sets up and takes down in a matter of minutes for easy portability.
- Adjustable Length - Create your own firewood rack with (2) 2' x 4' lumber cut to size.
- Hi-Grade Steel frame - 1-3/8" / 3,5 cm diameter round-tube steel frame with DuPont TM Premium powder coat finish. Resists chipping, peeling, rust and corrosion.
- Sturdy Metal Brackets - Two piece bracket and uprights constructed of high grade powder coated steel that looks great and performs better.
- Assembly Hardware - Ready to build kit includes wood screws to firmly secure bracket end panel uprights to lumber base.
- (2) All Steel Uprights
- Hardware Kit
- Easy step-by-step instructions
The ShelterLogic 10 ft x 20 ft Canopy Extension Sidewall kit is the quick and affordable solution for special events and seasonal protection. Quickly convert any 20 ft long canopy to a fully covered event tent, single or double wall wind break in minutes. Comes ready to install out of the box with steel tent poles and tie downs. Expands coverage are by 280 square feet of protection.
- Manufactured to the Highest Quality Available.
- Design is stylish and innovative. Satisfaction Ensured.
- Great Gift Idea.
Adjust the length and height of your firewood rack with a Firewood Rack Bracket Kit. Made with a durable, molded ABS plastic that is tough enough to withstand corrosion, cracking, and peeling from any kind of weather. This is a "tool free" assembly where all that is required is (6) 2'x 4' lumber purchased separately and cut to your desired length to organize and store wood.
- Innovative Design - Specially designed to firmly fit 2 x 4 lumber for a sturdier rack construction.
- No Tools Assembly - Tool free easy set up and take down. Cut 2 x 4 lumber to your desired length. Fully adjustable design.
- Impact Resistant Polymer -Tough and durable, our brackets are molded ABS plastic that will not rust, corrode, crack or peel and really holds up to the elements.
- Purchase 2' x 4' Lumber - (6) 2' x 4' lumber cut to desired length is required to use Firewood Rack Brackets.
- 2-pc ABS Plastic Holders
- Easy step-by-step instructions
The ShelterLogic 10 ft. x 15 ft. pop up canopy deliveries 150 square feet of coverage. The expansive truss top design combines quality construction and show room good looks in one great to go unit.
Overall frame is built with sturdy tubular steel frame with high performance joint components. Polyester cover is water resistant to withstand the outdoor elements. Wide based foot pads on every leg ensure a solid base and easy access to secure anchors.
- High grade tubular steel frame that is DuPont powder coated finish prevents chipping peeling, rust and corrosion
- 4 position adjustable frame constructed of sturdy, bicycle grade tubular steel frame for ultimate strength and stability
- Wide based foot pads on every leg ensure a solid base and easy access to secure anchors
- Polyester fabric cover is UV treated inside and out with added fade blockers, anti ageing and anti fungal agents
- 50+ UPF sun protection blocking 98 percent of harmful UV Rays
The Grow IT Heavy Duty Greenhouse with roll-up side vents deliver quality construction, quick and easy assembly and best in class value. Featuring 1 5/8 in. heavy duty all-steel frame, patent pending Shelter Lock Stabilizers, Ratchet Tite tensioning and the Easy Slide Cross Rail System for a stable and durable greenhouse.
The specially designed Clear View triple-layer, heat bonded Rip Stop translucent cover provides enhanced illumination for plant growth and protection. Roll-up side panels and half moons screen vents at each end provide optimal airflow and temperature control.
- The Grow IT 6 x 10 x 6 ft. 6in. greenhouse is the ideal, backyard grow house to start seedlings or extend the growing season
- Featuring 1 3/8 in. high grade steel frame with DuPont Premium powder coat finish for a stable and durable greenhouse
- The specially designed Clear View triple-layer, heat bonded Rip Stop translucent cover provides enhanced illumination for plant growth and protection
- Half moon screen vents at each end allow for increased airflow and temperature control
- Ready to build right out of the box.