Garage - Shop
Adjust the length and height of your firewood rack with a Firewood Rack Bracket Kit. Made with a durable, molded ABS plastic that is tough enough to withstand corrosion, cracking, and peeling from any kind of weather. This is a "tool free" assembly where all that is required is (6) 2'x 4' lumber purchased separately and cut to your desired length to organize and store wood.
- Innovative Design - Specially designed to firmly fit 2 x 4 lumber for a sturdier rack construction.
- No Tools Assembly - Tool free easy set up and take down. Cut 2 x 4 lumber to your desired length. Fully adjustable design.
- Impact Resistant Polymer -Tough and durable, our brackets are molded ABS plastic that will not rust, corrode, crack or peel and really holds up to the elements.
- Purchase 2' x 4' Lumber - (6) 2' x 4' lumber cut to desired length is required to use Firewood Rack Brackets.
- 2-pc ABS Plastic Holders
- Easy step-by-step instructions
- Genuine authentic anchoring for shelters, canopies and instant garages.
- Innovative corkscrew design digs in fast and holds on tight. Recommended for garages, sheds and larger canopies.
- Portable and reusable - heavy-duty, powder-coated steel construction will not rust, corrode, chip or peel.
- Quick clamp-on wire tie-downs are installed in minutes to legs and anchors with a rock solid connection.
- Proper anchoring of your shelter is mandatory. Make sure it is anchored securely to manufacturer specifications.
- ShelterLogic recommends (1) one ShelterAuger per leg.
The Bike Rack 6 by Monkey Bars securely stores 6 bikes in a compact space. The Bike Rack's ability to store 6 bikes is designed for long term storage, freeing up valuable floor space in your garage. For daily use, it is recommended to store up to 4 bikes, making it easier to get the bikes on and off the rack. The rack is constructed of industrial steel with a gray powder coat finish built to endure years of heavy use. The hooks snap and slide along the bar allowing you to choose where to place the bikes along the rack. The hooks also contain a plastic coating to prevent scratches on your bikes. The rack is 48" wide allowing you to drill the brackets into the wall studs. This rack is strong enough to hold up to 200 lbs. Get your bikes up off the floor today, giving you more room for your cars!
2 - Shed Brackets
1 - 51" Monkey Bar
6 - J Hooks
1 - Hardware BagLearn More
All-purpose canopy provides temporary seasonal storage and protection from sun and rain. Perfect for outdoor art shows, flea markets, weddings, picnics or vehicle storage.
- Heavy duty 1 3/8" all steel frame
- Bonded with DuPont™ thermoset baked on powder-coated finish which prevents chipping, peeling, rust and corrosion
- Triple layer, chemically heat bonded, enhanced weave, rip-stop, 100% waterproof, polyethylene cover
- UV treated inside and out with added fade blockers, anti-aging, anti-fungal agents
- One piece fitted full valance cover
- Bungee cords
- Foot plates
- Temporary spike anchors
The new Quick Clamp Canopy™ Tilt Mount cover adjusts with the sun for all day shade protection!
- Innovative patent pending pop-up frame design.
- High impact injection molded connectors.
- Shock cord side frame poles go up in seconds.
- Four-position vertical adjustment to a max of 9”/22,9 cm
- Fits tables up to 10 ft. / 3, 0 m long.
- Adjustable tilt-mount bracket clamp mounting system with pivot feature for easy attachment to many surfaces.
- Sun protection from any direction with 3-adjustable shade positions.
- UV treated, mildew resistant, water repellent desert bronze polyester fabric cover.
- Provides more than 75 square feet / 7m2 of coverage from sun and light rain.
- Super strong hook and loop cover attachment.
- CPAI-84 Fire-Rated.
The Wall Control Slotted Tool Board Deluxe Hook Assortment includes 26 durable steel slotted toolboard hooks and brackets that feature a scratch and rust resistant baked-on white finish. These more secure and stable toolboard hooks are for use with the slots found in all Wall Control Metal Pegboard tool board panels. Wall Control Slotted Toolboard hooks offer a patented engagement that requires two deliberate motions up-and-down to engage and disengage the hooks. This feature makes Wall Control Slotted Tooboard hooks less likely to fall out of the tool board than conventional peg hooks that can easily fall off when tools are removed. Although Wall Control Metal Pegboard Panels will accept conventional 1/4in pegboard accessories as well as Wall Control Slotted Accessories the Slotted Secure Tool Board Hooks included in this set are only for use with Wall Control Metal Pegboard Panels and Tool Boards. Wall Control Slotted Tool Board Hooks offer a baked-on color finish that is attractive and rust resistant for long lasting tool storage aesthetic appeal.
- (10) Standard Slotted Toolboard Hooks, 3/4in Reach
- (4) Medium Slotted Toolboard Hooks, 1-7/8in Reach
- (4) Medium 90 Degree Toolboard Hooks
- (2) Slotted Toolboard U-Hooks, 3in Reach
- (2) Slotted Toolboard C-Brackets, 1in x 1in
- (2) Slotted Toolboard C-Brackets, 2in x 2in
- (1) Extended Toolboard Hook, 9in Reach
- (1) Slotted Toolboard Handle Hammer Holder, 1-1/4in
- More secure tool board hook engagement over conventional peg board pegs.
- Made in USA
The ShelterLogic Full Length Firewood Rack Cover in 8ft length, keeps your firewood dry and protected all year round. Easily access log storage using the zipper closure which reaches to approximately the full height of the cover and firewood rack.
- Rip-Stop Fabric Cover - High quality 7.5 oz. polyethylene fabric cover. Zipper closure allows for easy access to wood. Full length for year round protection.
- UV Treated Fabric - Anti-fungal properties reduce mold and mildew.
- Fits Most Frames -2-zipper closure allows for easy access to wood.
- 8ft full length fabric cover
This kit will make a 10x20 canopy an enclosed unit. It is not the entire unit.
- Converts your 10' x 20' Max AP Canopy to a fully enclosed shelter.
- Triple-layer, ripstop white polyethylene cover is 100% waterproof. Cover is UV treated inside and out with heat-sealed seams for added protection against the elements.
- 50+UPF rating blocks more than 98% of UV harmful rays. UPF represents Ultraviolet Protection Factor and indicates how much of the sun's radiation is absorbed. 50+UPF is the highest fabric rating for radiation exposure. Only 2% of the UV rays will penetrate through the shade fabric.
- Enhanced visibility clear polyethylene windows.
- Great for seasonal storage or backyard events.
- 10' x 20' White Canopy Enclosure Kit
- (1) Solid Rear Panel
- (2) Solid Wide Walls
- (1) Solid double zippered door Panel
- Bungee Cords
- Easy Step-by-Step Instructions
The Golf Bag Rack 3 from Monkey Bars is a great way to store golf bags off the ground and out of the trunk. You can now store them in a simple and efficient manner. The Golf Bag Rack 3 will hold 2 to 3 Golf Bags. This is the perfect golf storage solution for the golfer. The Golf Rack is also great for club houses and golf rental shops. Purchase your Golf Bag Rack today.
1 - 35" Monkey Bar
1 - J Hook
2 - 3" Single Hooks
1 - Hardware BagLearn More
The Metal Pegboard Standard Workbench Tool Storage Organizer Kit offers maximum tool board storage versatility and strength with over 10.5 square feet of pegboard storage space. Three 16in x 32in Black powder-coated pegboard panels combine for a total tool storage area of 48in x 32in. The attractive Metal Pegboards are great for heavy duty toolboard storage needs due to their 20 gauge steel construction that will not warp, fray, or crack and are over 10 times stronger than conventional pegboard creating an industrial grade tool storage solution. Wall Control metal pegboards offer both slots and holes to accept slotted tool board accessories as well as conventional 1/4in peg board hooks making this pegboard extremely versatile by giving the user multiple options with tool board accessory selection. Mounting hardware is included with pegboards. Includes Screws and Sheet Rock Anchors. Maximum Pegboard Versatility. Wall Control pegboard panels accept conventional 1/4in pegboard pegs as well as Wall Control slotted pegboard hooks, brackets, shelves, and supplies for maximum tool storage versatility. These Metal Pegboard ToolBoards are constructed with a preformed 3/4in return flange that separates the panel storage surface from the wall. Pegboard panels mount directly into studs or sheet rock with no framework required.
- (3) Black Powder-Coated Metal Pegboard Panels 32in x 16in (Covers 48in x 32in when Installed)
- (1) 9in Shelf Assembly
- (1) 6in Shelf Assembly
- (3) Plastic Hanging Bins with Bin Hanger
- (1) Screwdriver Holder
- (1) Hammer Holder
- Assortment of (20) Additional Hooks and Brackets
- Mounting Hardware is Included
- Metal Pegboard is in Black with Blue Slotted Toolboard Accessories
- Tools & Tool Sets Not Included
- Over 10 Times Stronger than Conventional Pegboard
- Easy to Install
- Made in USA