The DK-50 draft induction kit's optional equipment for Norseman Add-on Furnace models VG1500 and VG2500. Does your Furnace not burn the fuel completely? Does your Chimney Draft poorly? The Draft Induction kit forces air into your furnace allowing a more efficient and Hotter burn and also easier starting. This kit comes with a wall mount thermostat to help improve the heat produced by your Norseman Furnace.
- Blower attaches to the rear of the furnace to provide forced air combustion
- Includes wall-mounted thermostat
- Fan control center included
- Highly recommended for coal burning
Optional blower for our Items# 173604 & 173895, is easy and fast to install. For even more heat distribution, the Vogelzang Heat Circulator blower draws heat from around the firebox and blows it under the stove unit into the room. Fan motor safely and efficiently distributes 100 CFM of warm air quietly and uniformly.
Three-position switch allows for manually operated or automatically controlled with built-in 100°F on/off thermostat. Prewired, after mounting, simply plug into standard 110 Volt outlet. Holes are pre-drilled and fasteners are included. Attaches easily to existing panel on Vogelzang stove.
- 110 Volt outlet required to run blower assembly
- May NOT be installed in mobile homes, manufactured homes, trailers or tents
The Pellet Vent System features a double-wall, air-insulated design ensuring superior performance and safety. A stainless steel inner wall, combined with a galvalume steel outer wall which provides maximum heat and corrosion resistance for safe, long lasting performance. A 1/4" air space between the inner and outer walls provides for static air insulation ensuring safe outer wall temperatures, while providing a 1" clearance to nearby combustibles.
This kit is used for Horizontal Installations where you would be exiting through a wall for exhaust.
- 1- Square horizontal cap
- 1- 90 degree elbow
- 5- 1' pipe lengths
- 1- clean-out tee w/cap
- 1- wall thimble
- 1- pipe adapter
- All Components are 3" material
Out of stock
Use for through-the-wall chimney installations. The tee cleanout cap is removable for easy chimney cleaning or inspection. Wall Straps, a Wall Thimble, and a Tee Support must be installed with the Tee as directed. Tees have 1” insulating blanket. Ventilation air for chimney must be drawn from outdoors.Learn More
Use for through-the-wall chimney installations. The tee cleanout cap is removable for easy chimney cleaning or inspection. Wall Straps, a Wall Thimble, and a Tee Support must be installed with the Tee as directed. Tees have 1” insulating blanket. Ventilation air for chimney must be drawn from outdoors.
- Made of Stainless Steel
Designed for appliances tested and listed for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. 36" chimney pipe has 1/2” insulation. To calculate the installed length of DuraPlus chimney pipe, subtract 1 1/2” from each length of chimney pipe.
- Dimensions: 8" Inner Diameter x 12" Outer Diameter x 36" Length
- Includes protective Carton Filler for shipping