This fire suppressant is indispensable as the first line of defense for controlling fires that occur from creosote build-up in chimneys. Independent test results show it suppresses a chimney fire in an average of 22 SECONDS! A homeowner or professional fire fighter can use Chimfex as a safe, fast, and easy-to-use tool to combat a chimney fire with no water damage.
Similar to a flare, you strike the end to light it, toss it in the wood stove or down the chimney and it extinguishes the fire by using up the oxygen. They are only good for one use. It is recommended to keep 2-3 on hand since many times chimney fires can re-ignite. Use in wood stoves, fireplaces, or fireplace inserts.
- Safe, fast, and easy to use
- Used by many fire departments to extinguish chimney fires
- Shown to suppress chimney fire in about 22 seconds
- For use in wood stoves, fireplaces, or fireplace inserts
Wood pellets are an excellent primary or secondary heating source. They are clean burning, environmentally safe, and are a recyclable energy. Pellets are approximately 1 to 1 ½ ” long and ¼” in diameter. They smell pleasant and are clean and smooth. Wood pellets are easy to use. Simply pour the pellets from your 40 lb. bag directly into your stove’s hopper. Remember to store the pellets in a dry area
When building a fire, you will notice that pellets are easier to start than traditional chopped wood which is usually wet. That’s because our pellets have a superior BTU heating value and are low in moisture content. They’re also long lasting. Another plus is that bags of pellets stack compactly in much less space than a cord of wood.
As a guide, one 40 lb. bag will normally heat a 1,500 sq. ft. home for one day. To determine the amount of pellets you will need, consider these factors: the size of your home, the outside temperature, the amount of insulation in your home, and the desired amount of heat you prefer. After a simple trial period, you will easily find out just how many bags of pellets you will use and will be able to stock up for the winter.Finally, pellets are much more economical than propane and are good for the environment--not to mention the easy clean-up due to the low ash content and the fact that you will no longer have an aching back from chopping wood!Learn More
Replacement blower motor, 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs. Replace part number 80496. For units: 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
- 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs.
- Replaces part number 80496
- Replaces part number 80230
- For units 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
- 24 Gauge
- Used to Connect Wood Stove to Chimney
- Single Wall
Designed for appliances that are tested and listed for use with a 2100 degree Fahrenheit HT chimney system such as wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters or other appliances fueled by wood, oil, coal or gas. Outside diameter approximately 10". This Chimney Pipe Section is one of many top quality items in our Insulated Stove Pipe department.Learn More
Wood/Coal Shaker Grate for models 1300, 1500, 1537, 1557M, & 22AF
- Dimensions: 14 in. L x 5.12 in. W x 0.5 in. H