Your child's Peg Pérego riding toy will never run out of juice when you have this 24 volt rechargeable spare battery on hand. Swap it in when the riding toy runs down for non-stop fun. For use with Peg Perego High-Performance 24 Volt Child's Vehicles.
- An extra battery for non-stop ride-on fun
- For use with Peg Pérego High-Performance 24 Volt Childs Vehicles.
- Arrives fully charged and ready to use
- Provides extra hours of playtime for young riders
Replacement blower motor, 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs. Replace part number 80496. For units: 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
- 120 volts, 60 Hz, 1620 RPM, 300 Watts, 2.6 Amps. and 1/15 HP/ 8.75lbs.
- Replaces part number 80496
- Replaces part number 80230
- For units 1300, 1303, 1321, 1400, 1500, 1537, 1537G, 1557M, 6100, 6220, 30A, 22AF, 24A.
Every wood or coal stove or furnace manufactured to date is not totally efficient. This means that heat which could be utilized is going up each and every chimney. The MH6 is designed to utilize a part of that lost heat and yet lets enough heat pass through the chimney so cresote and soot formation is avoided. The MH6 has a quiet dependable fan that promotes heat circulation to improve overall efficiency. Heavy-gauge outer box and heat tubes provide durability and long lasting performance.Learn More
Replacement draft induced kit for wood and coal furnaces and wood furnaces. Comes with limit control. Part number 11DIKL. This kit comes with these parts included: 80243A, 68618, 83379, 83250, 68231, 80130, 80145, 80129, 80006.Learn More
The Pellet Vent System features a double-wall, air-insulated design ensuring superior performance and safety. A stainless steel inner wall, combined with a galvalume steel outer wall which provides maximum heat and corrosion resistance for safe, long lasting performance. A 1/4" air space between the inner and outer walls provides for static air insulation ensuring safe outer wall temperatures, while providing a 1" clearance to nearby combustibles.
This kit is used for Horizontal Installations where you would be exiting through a wall for exhaust.
- 1- Square horizontal cap
- 1- 90 degree elbow
- 5- 1' pipe lengths
- 1- clean-out tee w/cap
- 1- wall thimble
- 1- pipe adapter
- All Components are 3" material
- 4" x 60"
- Stainless steel inner and outer wall
- 12" clearance to combustibles rated to 570 degrees
Designed for appliances tested and listed for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. 12” chimney pipe has 1” insulation blanket. To calculate the installed length of DuraPlus chimney pipe, subtract 1 1/2” from each length of chimney pipe.
- Dimensions: 8" Inner Diameter x 12" Outer Diameter x 12" Length
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Supports up to 35’ of DuraPlus Chimney. Use adapter to attach DVL or DuraBlack to the support box. Painted black. Trim collar included.Learn More
Use with flat, vaulted, or cathedral ceilings. Square Ceiling Support Box is painted black. Refer to Ceiling Pitch table to determine size of support box needed. Supports up to 35’ of DuraPlus Chimney. Starter Section built in.
- 11" Height