We offer a wide selection of outdoor power equipment such as Husqvarna lawn mowers, Poulan chain saws and hydraulic log splitters.
The Southland 43 CC, 2 Cycle Mini Cultivator is easy to start, via manual recoil. This mini cultivator has a lot more power than you would expect out of a small motor. The Southland 43 CC Cultivator is lightweight and easy to handle and move.
The mini cultivator works great for gardens and flower beds. It makes cultivating jobs a lot easier and more manageable. The Southland 43 cc Cultivator helps with soil preparation when it comes to garden maintenance, as well as getting un-worked plots ready. Its size makes it easy to use between plants and rows, instead of using a hoe and a lot of hard back breaking work for soil preparation, this mini cultivator makes the job of keeping weeds out of gardens and flowers easy to do.
- Manual recoil easy start fuel delivery system
- Adjustable tilling widths
- 8-inch tine diameter with up to 5-inch tilling depth
- Direct gear drive with clutch
- 2 rear, 7" wheels
- 3 pieces, folding handle
- Front carrying handle
- 2 year limited warranty
- EPA & CARB certified
Outstanding hand-held performance and light weight versatility make this blower a go-to for any homeowner!
Type Handheld Engine Displacement (cc) 25.4 Carburetor Rotary Starting System Standard Fuel Capacity 16.9 See-Through Fuel Tank Standard Air Volume (cfm-pipe) 391 Maximum Air Speed (mph) 165 Average Air Speed 137 dB(A) 65 Dry Weight (With standard pipe) 9.9 Consumer Warranty 5 yrs Commercial Warranty 2yrs Rental Warranty 90 Days
Ideal for jobs like pruning, lighter cutting tasks and hobby work. Easy to start and operate, thanks to built-in Husqvarna features like ergonomic design, facilitating technology and powerful X-TORQ engine with low emissions.
- Cylinder displacement: 34.4 cc
- Power output 1.8 hp
- Idling speed 3000 rpm
- Power output: 1.1 hp
- Maximum power speed: 9000 rpm
- Cylinder bore: 1.5 inch
- Cylinder stroke: 1.26 inch
- Ignition system: IIDA
- Ignition module air gap: 0.01 "
- Spark plug: NGK BPMR7A
- Electrode gap: 0.02 "
- Carburetor model name: ZAMA W29
- Fuel tank volume: 0.14 US pint
- Oil tank volume: 0.09 US pint
- Oil pump type: Fixed flow
- Oil pump capacity: 8-8 ml/min
- Chain pitch: .325" / 3/8"
- Recommended bar length, min-max: 13"-16"
- Chain speed at max power: 53.48 fts
The Tuff Top canopy is made of a high density thermoplastic and fits 2” square or 2” x 3” ROPS. It has an adjustable fit for forward leaning, vertical or rear leaning ROPS. It installs, folds down for trailering at non-highway speeds(we suggest removal for speed in excess of 35mph), or removes in seconds without tools!
- Strong steel frame is "e" coated and powder coated.
- Tough thermoplastic top panels and all parts easily replaced.
- Fits all ROPS equipped tractors with 2" square or 2" x 3" ROPS.
- Adjustable to fit: forward leaning, vertical or rear leaning ROPS.
- 48 X 52” fits 2 x 2 & 2 x 3 ROPS
MoJack EZ Max is a smarter way to maintain your lawn mower. This lift is precisely engineered to lift most residential riding mowers and lawn tractors, including zero turning radius models. MoJack EZ is ideal for blade sharpening, belt replacement and debris removal. Safer and more convenient than car ramps or blocks, it features a screw jack and safety-lock pin system to prevent the machine from slipping or becoming unstable while performing maintenance.
- Includes: (1) Tower Assembly, (1) Lift Arm, (1) Base Floor Tube, (1) Base, (1) Base Support Channel, (2) Wheel Pads, (2) Safety Straps, (2) Wheels, (1) Hardware pack
- Made of Heavy Duty Steel
- Red and Black Finish
- Fits most residential tractor and ZTR mowers
- Easily lift manually or with a powered drill
- Folds flat for easy storage
- Compatible with the MoJack Workbench attachment
- New improved clutch system replacing the pull pin
- Length: 38 Inches
- Wheel span measurement: 18.5 In. to 47.5 In. (inside to outside front tires)
- Lifting capacity: 450 lbs (lifting the front of the mower, not the total mower weight)
- Lifting height: 24 Inches high
The 967185102 is powered by a 42cc 2-cycle gas engine and is outfitted with an 18" steel bar. The 967185102 is equipped with an automatic chain oiler, reduced vibration handle to lessen operator fatigue, and tool-less chain adjustment system. A carrying case and extra chain are included with this model as well. Excellent for general landowner property management.Learn More
Powerful all-round saw for people who value professional qualities in a saw. The X-Torq® engine means lower fuel consumption and reduced emission levels. Auto return stop switch, side mounted chain tensioning and visible fuel level makes the saw easier to handle. Equipped with Smart Start® and fuel pump to every time ensure easy starts.
Air Injection- Centrifugal air cleaning system removes larger dust and debris particles before reaching the air filter. This results in reduced air filter cleanings and improved engine life.
X-Torq- Delivers lower fuel consumption and reduced exhaust emission levels in accordance with the world´s most stringent environmental regulations.
Quick-Release Air Filter- Facilitates cleaning and replacement of the air filter.
Ergonomic Rear Handle- Increased comfort with soft inlay, ergonomic trigger and asymmetrical handle.
Felling Mraks- Distinct marks for better felling precision.
Combined Choke/Stop Control- Allows for easier starting and reduces the risk of engine flooding.
Snap Lock Cylinder Cover- Saves time when changing spark plugs and cleaning.
Three-Piece Crank Shaft- Forged three-piece crankshaft for maximum durability for the toughest applications.
Engine specification Cylinder displacement 50.2 cc Power output 3.2 hp Maximum power speed 9000 rpm Fuel tank volume 15.22 fl oz Fuel consumption 504 g/kWh Idling speed 2700 rpm Spark plug NGK BPMR7A, Champion RCJ7Y Electrode gap 0.02 " Torque, max. 2.6 Nm/7200 rpm Lubricants Oil tank volume 0.55 US pint Oil pump type Fixed flow Vibration & noise data Equivalent vibration level (ahv, eq) front / rear handle 2.3/2.7 m/s² Sound pressure level at operators ear 104 dB(A) Sound power level, guaranteed (LWA) 115 dB(A) Cutting equipmentChain pitch .325" Recommended bar length, min-max 13"-20" Chain speed at max power 56.76 fts Overall dimensions Weight (excl. cutting equipment) 11.24 lbs
The Echo CS-590 is the ideal chainsaw for any job. Offering dcompression valve for easy starting, a 20" bar, and offers more power than most competitor's saws this is the saw for the job!
Engine Displacement (cc) 59.8 Engine Displacement (cu in) 3.65 Starting System Standard Ignition System Digital Carburetor Butterfly Oiling System Automatic/Adjustable Vibration Reduction System Standard Standard Bar Lengths (in) 18, 20 Optional Bar Lengths (in) 16, 24, 27 Fuel Capacity (fl. oz) 21.8 Oil Capacity (fl. oz) 10.1 Dry Weight (lbs) 13.3 Bar Cover Plastic Bar Type Pro-Lite w/ProAm material Sprocket Type Spur Handle Plastic Consumer Warranty 5 yrs Commercial Warranty 2 yrs Rental Warranty 90 Days