Taylor-Way Gear-Driven Rotary Tillers have a rugged, reinforced main frame for years of dependable service. Available in 4’, 5’, 6’, or 7’ widths.
The heavy duty gear drive operates in an oil bath for dependable performance and reduced maintenance.
6-tines per flange requires less horsepower yet operates smoothly, especially in tough conditions.
Standard slip clutch 540 RPM drive line provides protection for drive components…a feature that’s optional on most other brands.
Tilling depth controlled by adjustable skid shoes – to a maximum 8” depth.
Standard heavy-duty rear deflector provides improved leveling and soil finish.
Reinforced main frame.
Recommended for tractors up to 65 HP
- 540 RPM Slipclutch drive line standard on Taylor-Way tillers, optional on most other brands
- Tilling depth is controlled by adjustable skid shoes – to a maximum of 8” depth
- Heavy duty gear drive gives smooth reliable performance. Oil bath operation provides constant lubrication for long life
- 6-tines per flange require less horsepower
- Heavy-duty steel rotor shaft
- Heavy-duty flanges built for years of hard work
SKU 98920092 Model 972-RGDT-72 Weight 1000.0000 Color No size No Width No In Store Only No Price $2,122.97
Rural King provides a defect or damage warranty within 30 days of receipt. All Manufacturing Return Policies Supersede Rural King's Return Policy.
- not as advertised Review by Fred
Price Value Quality
The tiller works great, but it does not till 8 inches deep. If you measure the blades, they are only 6 inches long to the spindle. I do not even see how it is possible to get 8 inches depth from this tiller. With that being said, it does a great job tilling about 4-6 inches deep.
(Posted on 2/5/2016)
- Deceptive. Sent me an OLD model Review by Curtis Weddle
Quality Price Value
I ordered this tiller and received an old model King Kutter. Square tubing frame, old design shield that is poorly welded to the square tube frame. Frame is a dirt catcher instead of the smooth top shown on the Taylor Pittsburgh and new model King Kutter.
Very unhappy with this purchase and deceptive advertising. The crate / frame this unit was shipped in has obviously been sitting outside for a LONG time. It is weathered and warped. The tiller has lots of rust on it.
Had I been present to accept the delivery I would have left it o the truck.
I do not appreciate what Rural King / Taylor Pittsburgh have done. They have been deceptive and I will never purchase from them again unless they make this right and return this tiller and replace it with a proper new model as I should have received.
I'm angry as I can be about the deception these people have demonstrated. I'll never trust them again.
(Posted on 12/25/2014)
Write Your Own Review
- Q & A
Product QuestionsWhen the specs on the tillers state a recommended hp range (25-50, up to 65hp) does that mean the tiller should NOT be used on larger HP tractors? I have a 75hp John Deere and looking for a 5' to 7' model to do a small garden (I don't need a large or very expensive tiller). However, I also don't want to void any warranties or damage a new piece of equipment.is this tiller offset as the picture makes it look.my wheelbase is 80" wide and the offset will workQuestion by: rick on Apr 4, 2016 9:32:00 AM