Having the parts you need for a day’s work is a lot easier with these sturdy bin cabinets and parts cases. Keep spare bins and cases filled in your shop so the crew is ready to roll in the morning.
- Dimensions: 12" H x 32 1/2" W x 11 3/4" L
- 18 Drawers
Delta Champion, Low Profile Aluminum Single Lid Crossover (For GMC and Chevrolet Trucks: Short / Long Bed 1500, 2500 & 3500) (Bright), 1-351000$259.99
Crossovers are supported across the width of the truck bed by the tops of the bed side rails or walls. Storage space is available on the floor under a Crossover.
Crossovers are available with a Single Lid or Dual Lids. Depending on the product selected, the Dual Lid may be a Mid-Lid, Gull Wing or Rear-Hinged design. All models offer different advantages.
- Gear-Lock locking system resists over 1,000 lbs of break-in force
- Built-in full-length storage compartment provides storage for small parts and tools.
- High-strength body design resists cargo damage and attempted break-ins.
- 3-Layer RSL lid provides superior lid strength and rigidity
- Self-aligning lid latch pins pivot side to side to ensure the lead seals tight
- For GMC and Chevy Fullsize Short-Bed & Long-Bed 1500, 2500 & 3500 Series Models Except 1500 Stepsides
- Measures 72 x 24 x 15 inches
$248.97The Champion 66520 2 in Semi trash pump with hose kit is a powerful pump that is light, compact and efficient. The unit is powered by a 196 cc Champion Single cylinder, 4-stroke OHV engine with a .9 gal. fuel tank and 0.63 qt. oil capacity. The recoil start makes this pump easy to set up and run. Integrated 6 in. never flat wheels and fold away handlebar allow for the portability necessary to take the pump where you need it most. CARB approved for sale in all 50 states.Learn More
- Easy pull recoil start
- 4-stroke, air-cooled 196 cc champion OHV engine
- Cast iron engine sleeve for durability
- Low oil shut-off
- 2 in. NPT diameter inlet/outlet
- Total head 98 ft./suction head 26 ft.
- Maximum delivery volume 158 gal./minute
- Maximum solids diameter 9/16 in.
- 0.87 in. diameter tubular steel frame (roll cage) for protection and durability
- Fold away handlebar for portability and safety
- 6 in. never flat tires
- Complete hose kit includes: 12 ft. intake hose, cam action quick coupler, intake strainer, 20 ft. discharge hose, hose clamps, Teflon tape
- Horizontal “D” Handle for User Comfort
- Lock-off Safety Buttons Operated by Left or Right Hand
- Belt-Drive Design for Smooth, Quiet Operation
- External Accessible Brushes for Easy Inspection and Replacement
- Built-In Laser-Light Cutting Guide for Quicker Alignment and Improved Accuracy
- Double-Rail Sliding System Handles Stock up to 13-3/8 inch
- Hold Down Clamp Secures Stock For Improved Accuracy
- Heavy-Duty 15 Amp, 3,800 RPM Motor
- Adjustable Extension Arms Provide Extra Support for Cutting Longer Materials
- Spindle Lock For Quick Blade Changes
- Die Cast Aluminum Base for Portability
- Tall Sliding Fences Provide Extra Vertical Cutting Capacity Against the Fence
- Bevel Cuts Up to 45 Degrees LEFT and RIGHT
- Make Precision Miter Cuts Up to 50 Degrees Left and Right, with 9 Positive Stops at Common Angles
Includes 80T Carbide Tipped Blade, Hold Down Clamp, Dust Bag, Extension Wings and Blade Wrench
- Model: GMSDB1512L
- Rated Power: 120V~/ 60HZ, 15 Amp
- No Load Speed: 3,800 RPM
- Blade Size: 12” (305mm)
- Arbor Size: 5/8”
- Bevel: 45° Left and Right
- Miter: 50° Left and Right
- Cutting Capacity (Base molding vertical against fence): Up to 5-1/2”
- Cutting Capacity (Crown molding vertically nested): Up to 6-1/4”
Max Cutting Capacity:
- 0° x 90°: H 3-1/2” x 13-3/8”
- 45°x90°: H 3-1/2” x 9-3/8”
- 0°x 45°: H 2-1/8” x 13-3/8”
- 45°x45°: H 2-1/8”x 9-3/8”
- Class II Laser
- Wave Length: 650 nm
- Max Output <1.0 mw
The TAWB56W is an aluminum flush mount design that provides a clean look and an unobstructed view of the road. Made of .060 in. aluminum. New wider design. Offset lid construction allows lid to open fully without back wall interference. Strong double latch paddle handles protect your valuables.
- Fits full size trucks with a wider design
- Offset lid construction allowing lid to open fully without back wall interference
- Strong double latch paddle handle protects your valuables
- Bright finish
Flush mount design provides a clean look and an unobstructed view of the road.
- Front and side walls are angled to accommodate sloped walls and wheel wells
- Offset lid construction allows lid to open fully without back wall interference
- Available in several sizes: 48" and 60"
- Available in White or Black finish
- 16 gauge steel
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Aerodynamic domed lid adds strength
- Ethafoam mounting strips protect truck's finish
- Sturdy, one-piece, no sag base design
Heavy-duty van storage, made easy. WEATHER GUARD® EZ-Cube Shelving is pre-assembled and ready to install. Pre-punched shelves allow for quick installation of cabinets, bin dividers, or accessory doors. Heavy-gauge steel construction with our signature bright white powder coat ensure years of durability, and a professional appearance.
- Designed to mount to the floor or on top of the Wheel Well Base Cabinet. Dividers are welded in place.
- Measures 30" H x 36" W x 12" L
- Has 6 dividers
Fits Hi-Side Box model 265-0-01.
- #7 in picture
- Includes Weather Strip, Decal, and Bolt Kit.