$429.00The M18 FUEL™ 1/2" High Torque Impact Wrench with Friction Ring Kit features the most powerful cordless wrench in its class, delivering up to 700 ft-lbs of maximum fastening torque, 1,100 ft-lbs of nut-busting torque and up to 2X more runtime. The POWERSTATE™ Brushless Motor outperforms competitors with constant power output, and the Milwaukee® designed impact mechanism delivers up to 700 ft-lbs of maximum fastening torque. The REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack delivers more work per charge and more work over pack life than any other battery. It features an onboard fuel gauge to help you monitor the charge moreaccurately, so there’s less downtime on the job. REDLINK PLUS™ Intelligence allows the operator to choose between 2 fastening modes with Milwaukee’s proprietary DRIVE CONTROL™ feature and ensures maximum performance and protection from overload, overheating and over-discharge.Learn More
This 18-volt lithium-ion FUEL™ High-Torque Impact Wrench offers quick, tool-free socket changes with a 1/2" friction ring anvil. You’ll get ultimate comfort during extended use with the new contoured soft grip. The kit includes 2 REDLITHIUM™ XC 4.0 Extended Capacity Battery Packs, a multi-voltage charger and a carrying case.
Delta Steel Transfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate aluminum, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- Internal baffles add extra strength and control the flow of the contents when moving.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 98 Gallons
- Maximum Fill Capacity: 106 Gallons
Dimensions: H: 18 1/8 W: 18 1/4 L: 48 1/8
Weight (lbs.): 100
Cubic feet: 9
- Brushed stainless steel paddle handle, with rotary style latch mechanism features a two position latch that prevents the door from inadvertently opening.
- Aluminum doors swing down for easy access and a full view of the contents. Opened door is supported by aircraft-type cables with swedged fittings which can be removed to allow for a fully open swing down position.
- Positive weather seal protects tools and materials stored inside from road dirt and weather.
Dee Zee Transfer Tanks - A safe and convenient means for transporting non-flammable liquids. Steel, protected by black NRT (No Rust Technology) rust inhibitor powder coat finish. Radius curve design eliminates key weld pressure points. Feature 3 stability baffles, lockable cap, .375" drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Not designed for use as an auxiliary fuel system. Not for use with gasoline. Does not meet title 49 of the United Stated Federal Registry.
- Specialty Series Transfer Tank
- Heavy-Duty 14-Gauge Steel
- Texture Black Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Radius Curve Eliminates Weld Pressure Points
- Includes Cap And Coupler For Venting
- 3 Stability Baffles And Drain Plug
- Volume: 50 Gallon Capacity
- L-Shape Design
- Made In USA
- Limited-Lifetime Warranty
Dimensions: H: 18 W: 18 1/4 L: 30 1/8
Weight (lbs.): 70
Cubic feet: 5.6
- Aluminum Door and Hinge
- Three-Point Latching System
- 14 gauge steel picture Frame Body Design
- Available in Black Armor-Tuf Finish or White Armor-Tuf Finish (530-3-01)
Underbody boxes provide a secure, convenient storage solution.
- Specially designed channel and bulb seal is designed to keep water out
- Coated steel cable allows door to remain open at a 90 degree angle
- Locking stainless steel flush mount T-handle provides security
- Lid available in Aluminum or Rhino
- Protected with Rhino Lining
- Sturdy, one-piece, no sag base design
The Reliance Pro/Tran R Series(NEMA 3R) transfer switches are ideal for outdoor installation in residential and commercial applications. The gasketed steel cabinet is powder-coated, with padlockable cover, and will accommodate the generator cord with the cover closed. Included is 16-inch length of flexible non-metallic, liquid-tight conduit with fittings. Simply mount the cabinet, attach the conduit and feed the clearly-marked wires from the transfer switch into the load center. Then select the load center circuits needed in an emergency and connect them to the wires leads from the transfer switch. Each cabinet includes six combination 1/2-inch and 3/4-inch knockouts, one on each side, two on the bottom and two on the back.
All Raintight Pro/Tran transfer switches feature branch-circuit rated breakers, heavy-duty power inlet and non-defeatable (break-before-make) double-throw switches. All 125/250V models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.Learn More
Aluminum Top Rail Boxes Professional Top Rail Mount boxes have a double box design to provide additional storage without losing valuable truck bed space. Easily mounted to the bed rail of most trucks and includes water resistant gaskets.
- Designed for strength with weather proof gaskets
- Front opening protects contents from the elements
- Recessed Stainless Steel T-Handle
- Available in diamond-tread Bright finish
- Sturdy .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Dimensions: 72" L x 12" W x 22.5" H
If you are looking for a great gift, take a look at this combo deal! The DEWALT 20V XR Lithium Ion Premium Brushless Hammer/Impact Combo, features a DEWALT-built brushless motor that delivers up to 57% more run time over brushed. The XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs. The DCD995 20V MAX1/2" hammerdrill features a 3-speed, high performance (0-2,000 RPM) all-metal transmission that optimizes tool-to-task for fast application speeds and improved run time; 0-34,000 BPM for fast drilling in masonry materials; a compact size at 8.4" front-to-back length and lightweight at 4.7 lbs. Great for fitting in tight areas. The DCF886 20V MAX 1/4" impact driver provides 1,500 in-lbs. of max torque at fast 0-2,800 RPM speed and 0-3,200 impacts per minute; a compact size at 5.6" front-to-back length and lightweight at 3.4 lbs. Also great for fitting into tight areas. Both tools feature LED lights with 20 second trigger release delay, providing increased visibility in dark or confined spaces.
- (1) DCD995 1/2" Hammerdrill
- (1) DCF886 1/4" Impact Driver
- (2) 20V MAX XR High Capacity Li-Ion Batteries (4.0Ah)
- (1) Fast charger
- (2) Belt Hooks
- (1) Bit Holder
- (1) 360Degree side handle and Contractor Bag
- 20 Volts
- 3 Year Limted Manufacturer Warranty
The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.
- Comfortable 10 ft. (3 m) H100S2-10 MIG welding gun
- Built-in gas valve
- Regulator and gas hose
- Power cord with plug
- 10 ft. (3 m) work cable with clamp
- Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
- 8 in (203 mm) wire spool adapter
- Extra .030 in. (0.8 mm) contact tips
- Welds 24 gauge up to 1/4 inch in steel
- Proven built-in wire feeder with quick-release drive roll lever
- Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
- Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
- Easy access to polarity changeover includes storage holes for spare tips
- Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
- Self-resetting thermal overload and motor protection
- Rated Output at 20% Duty: 90A @ 18.5 VDC
- Cycle: 63 A @ 21 VDC (CSA Rating)
- Current Range: 25 - 140 Amps
- Max Open Circuit Voltage: 28 Volts
- Wire Feed Speed Range with load: 40 - 700 Inches per Minute
- Wire Feed Speed Range w/o load: 50 - 740 Inches per Minute
- Amps Input @ 115V: 20 (15 is CSA rating)
- Rated Load, 60 KVA: 2.9 (2.2 is CSA rationg)
- Hertz KW: 2.5 (1.77 is CSA rating
- Height: 12-3/8"
- Width: 10-5/8"
- Depth: 19-1/2"
Net Weight: 57 lbsLearn More