AirFoxx High Velocity 1 HP 3 Speed 3 Position 4000 CFM Air Mover / Carpet Dryer / Floor Dryer: AM4000A
- Weight: 42 lbs
- Width: 20.5
- Length: 19
- Height: 21.5
- Color: Black/Yellow
- Construction: Polyethylene
- CFM: 4000
- Horse Power: 1
- Power Cord Length: 25'
- Voltage: 110
- Amp: 10
- Impeller Diameter: 10.5"
- Static Pressure: 3.5"
- Sound Rating dB: 50
This Delta Jobox jobsite tool storage box provides safe storage for all your tools and equipment, and is designed with an internal padlock system that is almost impossible to force or cut open. The box is strong and durable, made with forkliftable, 16-gauge reinforced steel construction with 14 ga. continuous hinges. The tool box also features a rust resistant powder coat finish and smooth hemmed edges to prevent injuries & keep out moisture.
- Site-vault security system
- EZ-Loader caster skid bolster
- Stacked and welded steel hinges
- Heavy duty locking arms
- Bolt cutter proof locking system
- 48" x 24" x27 3/4"
- 15.4 cu. ft usable
- 6-gauge reinforced steel construction
$248.97The Champion 66520 2 in Semi trash pump with hose kit is a powerful pump that is light, compact and efficient. The unit is powered by a 196 cc Champion Single cylinder, 4-stroke OHV engine with a .9 gal. fuel tank and 0.63 qt. oil capacity. The recoil start makes this pump easy to set up and run. Integrated 6 in. never flat wheels and fold away handlebar allow for the portability necessary to take the pump where you need it most. CARB approved for sale in all 50 states.Learn More
- Easy pull recoil start
- 4-stroke, air-cooled 196 cc champion OHV engine
- Cast iron engine sleeve for durability
- Low oil shut-off
- 2 in. NPT diameter inlet/outlet
- Total head 98 ft./suction head 26 ft.
- Maximum delivery volume 158 gal./minute
- Maximum solids diameter 9/16 in.
- 0.87 in. diameter tubular steel frame (roll cage) for protection and durability
- Fold away handlebar for portability and safety
- 6 in. never flat tires
- Complete hose kit includes: 12 ft. intake hose, cam action quick coupler, intake strainer, 20 ft. discharge hose, hose clamps, Teflon tape
Design that provides a clean look and an unobstructed view of the road. Made of .060 in. aluminum. Offset lid construction allows lid to open fully without back wall interference. Ideal for 5th wheel cargo space. Strong double latch paddle handle to protect valuables.
- 48 inch chest box to use as hitch receiver box
- Made of .056 diamond plate aluminum
- Heavy duty double latch paddle handle to secure valuables
- Bright finish
The 20V grease gun from DeWalt is a must have on any construction site, farm shop or mechanics shop. With the 10,000 max psi motor, this grease gun will power through clogged grease fittings without trouble. With a single 20V battery, you can get through 16 grease cartridges without having to stop. The bright LED light assists in those tough-to-see areas. The 42" hose allows you to get those hard-to-reach fittings with ease. This grease gun kit includes a battery and the charger.
- Powerful motor delivers 10,000 max psi to power through clogged grease fittings.
- High-volume pump pushes up to 5.0 oz/min high-flow applications.
- Up to 16 cartridges per charge with a single DEWALT 20V MAX Battery (4.0 Ah)
- Variable speed trigger offers precise control of the grease flow
- 42" extra-long and flexible hose designed for reaching hard to access grease fittings.
- Bright LED light assists in locating hard to see grease fittings in low-light situations
- Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism.
- Integrated no-mar foot design allows operators to rest the tool on flat surfaces
- Air-bleeder valve assists in pump priming after cartridge changes
Innerside Boxes mount on top of the bed side rails or walls. The lower part of the box extends down the inside of the side rails or walls.
They are ideal for storing longer tools and can be used individually or in pairs.
Combine a pair of Innerside Boxes with a Crossover to create a wraparound storage system on your truck.
Measure the length of your truck’s side rails or walls to determine the length of Innerside Box you can install on your truck. If used with a Crossover, deduct the space needed for it and allow a 1” space between the Crossover and the Innerside Boxes for the lids to open and close without interference.
Innerside Boxes come with support legs and mounting hardware.
- Gear-Lock Locking System
- Resists over 1000 Lbs of break-in force.
- Built-in Full-length Storage Compartments
- Provides storage for small parts and tools.
- High Strength Body Design
- Resists cargo damages and attempted break-ins.
- 3 Layer RSL Lid
- Provides superior lids strength and rigidity
- Self aligning lid latch pins pivot side to side to ensure the lid seals tight.
UWS Drawer Slide Boxes are designed for storage and multipurpose usage with easy configurations. They are made from heavy gauge aluminum which provides long lasting durability. They feature zinc-plated metal sliders with stainless steel ball bearings and three removable bottom drawers. These boxes consist of five precision -injected commercial grade plastic drawers for storage. They are equipped with handle locks and weather-tight seals which provide good security. Model # DS22 Features: Designed for storage and multipurpose usage with easy configurations Made from heavy gauge aluminum Features zinc-plated metal sliders with stainless steel ball bearing Consists of five precision -injected commercial grade plastic drawers Equipped with handle locks and weather-tight sealsLearn More
Dee Zee Tool Box - Specially Narrow Crossover box. Constructed of durable Brite-Tread aluminum. Black-Tread powder coat, provides a gloss black finish while it protects and prevents oxidation. Other features: lockable push-button handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. J-Bolt mounting hardware included. Ideal for today's short bed crew cab or any truck that doesn't want to lose valuable bed space.
- Specialty Series Narrow Crossover Tool Box
- Non-Rusting .056 Brite-Tread Aluminum
- Protective Gloss Black Powder Coat Finish
- A Narrow Profile To Save Space In The Truck Bed
- Lockable Stainless Steel Paddle Handle Latches
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Crowned Lid With Full Length Hidden Hinge
- Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
- Made In USA
- Limited-Lifetime Warranty
All Generator Sales are Final. No returns. If you have a warranty issue it will be your responsibility to take to your local store for item to be fixed by one of our mechanics. If you purchase online and do not have a local store you can ship the item to us to be repaired at your expense both ways. Rural King assumes no liability of freight damage. If product is damaged in shipping the customer will be responsible for filing a freight claim with that carrier.
- Peak Power: 2000 Watt
- Engine Type: 4 Stroke/ EPA approved 80CC
- Outlets: 12V DC and 120V AC
- Fuel Capacity: 1.32 Gal.
- Run Time: 9hrs. at 50% Load