- 4-position blade clamp allows for flush cutting and increased positional versatility
- 1-1/8-inch stroke length delivers a fast cutting speed
- Variable speed trigger with 0-3000 rpm provides increased blade control and faster cut speeds
- Pivoting adjustable shoe extends blade life and allows depth of cut control
- Rubber over molded comfort grip delivers optimal comfort and control
Delta Champion, Low Profile Aluminum Single Lid Crossover (For GMC and Chevrolet Trucks: Short / Long Bed 1500, 2500 & 3500) (Bright), 1-351000$259.99
Crossovers are supported across the width of the truck bed by the tops of the bed side rails or walls. Storage space is available on the floor under a Crossover.
Crossovers are available with a Single Lid or Dual Lids. Depending on the product selected, the Dual Lid may be a Mid-Lid, Gull Wing or Rear-Hinged design. All models offer different advantages.
- Gear-Lock locking system resists over 1,000 lbs of break-in force
- Built-in full-length storage compartment provides storage for small parts and tools.
- High-strength body design resists cargo damage and attempted break-ins.
- 3-Layer RSL lid provides superior lid strength and rigidity
- Self-aligning lid latch pins pivot side to side to ensure the lead seals tight
- For GMC and Chevy Fullsize Short-Bed & Long-Bed 1500, 2500 & 3500 Series Models Except 1500 Stepsides
- Measures 72 x 24 x 15 inches
- Wide, full-length bolsters add strength and rigidity to the lid
- Fully welded upper body seams and formed channels in the bottom add strength and rigidity to the body
- Self-rising lid has center-mounted heavy-duty gas spring lid lift
- 3-compartment sliding tray provides convenient storage of hand tools and small items
- Full weather stripping helps seal out moisture and dust
- Tough Armor-Brite powder paint for superior rust resistance Learn More
The TAWB60W is an aluminum flush mount design that provides a clean look and an unobstructed view of the road. New wider design. Made of .060 in. aluminum. Offset lid construction allows lid to open fully without back wall interference. Strong double latch paddle handle to protect valuables.
- Fits full size trucks
- Offset lid construction allowing lid to open fully without back wall interference
- Strong double latch paddle handle to protect valuables
- Bright finish
Assembled Depth (in.) 24 in Assembled Height (in.) 18.5 in Assembled Width (in.) 60 in
- V-Groove Door Frame reinforces the body, creates a larger door opening & has wider surface for weather stripping
- Beveled edges on the high-strength door fit tight against the V-Groove Frame to resist break-ins & moisture.
- 16 Gauge Aluminum Continuous Hinge provides superior strength and durability.
- Quick Release Keyway Connectors allow the door to drop down for easier access for storing bulky items
- 3-Point Locking System locks the door at the top and both sides for superior strength and security.
- One-Piece Housing protects the locking system and strengthens the door.
- Leak-Proof Stainless Steel Rotating T-Handle is made for rugged use and reliability. Coated, Galvanized Steel Aircraft Cable Door Supports pivot on a shoulder rivet to prevent twisting.
- 12 Gauge cold-rolled steel door and 14 Gauge steel body stand up to the roughest conditions.
- 3-Yr. Limited Warranty Learn More
The Tradesman 67 in. Aluminum Mid-Size Cross-Bed Truck Box maximizes storage on your mid-size truck. This truck box has a full lid with a push button and leaves room below for bed storage.
- Cross bed storage for most mid size trucks
- Made of 0.060 gauge aluminum
- Full lid with push button for easy access
- Allows storage underneath
- Base will not sag
- Paint electrostatically applied to maximize resistance to abrasion and corrosion
- Ethafoam mounting strips protect truck's finish
Dee Zee Tool Box - Specially Narrow Crossover box. Constructed of durable Brite-Tread aluminum. Black-Tread powder coat, provides a gloss black finish while it protects and prevents oxidation. Other features: lockable push-button handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. J-Bolt mounting hardware included. Ideal for today's short bed crew cab or any truck that doesn't want to lose valuable bed space.
- Specialty Series Narrow Crossover Tool Box
- Non-Rusting .056 Brite-Tread Aluminum
- Protective Gloss Black Powder Coat Finish
- A Narrow Profile To Save Space In The Truck Bed
- Lockable Stainless Steel Paddle Handle Latches
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Crowned Lid With Full Length Hidden Hinge
- Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
- Made In USA
- Limited-Lifetime Warranty
Our standard and low profile cross bed boxes are designed to fit most full-size trucks and allow storage under the box. Several models to choose from include Gull-wing or Full (single) lid. Our low profile truck boxes provide our customers with maximum rear window visibility and aerodynamic styling for today's sleek truck designs.
- Larger 5/16" adjustable striker pin head
- Gas cylinders allow easy access
- Optional double latch system or push button design
- Weatherproof gasket prevents leakage
- Available in Bright or Black finish
- .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Ethafoam mounting strips protect truck's finish
- 18 x 70.2 x 56 inches