- Tank - 30 Horizontal
- Max Pressure (psig) - 175
- Normal Power (HP) - 13
- Flow @ Max Pressure - 25 cfm
- Dimensions - 51x33x44
- Weight - 469 lbs
- NPT outlet - 1/2
- Voltage/Engine - Honda
Regular Price: $669.97
Special Price: $602.97Product Features
- EPA certified
- INVERTOR TECHNOLOGY
- 5.3hp 149cc Powerease Engine with Low Oil Alert
- 3500 W and 3000 running Watts
- 1 x 120V Twistlock and 1 x 120V duplex
- DC voltage
- Auto idle feature
- 60dB at 50% load
- 5.7L fuel tank
$1,099.97The 80 Gallon 2-Stage Air Compressor is designed to provide continuous power and is built to last.
- 5 HP (as rated by engine manufacturer) 230V 2-stage air compressor
- 175 max. PSI and 80 gal. ASME tank
- 15.8 CFM @ 90 PSI
- 100% continuous duty all cast iron pump
- 230V single phase motor, no starter required
- Includes finned intercooler
- Mounted discharge valve
- Extended design life lasts 15,000+ hrs.
- One year industrial grade warranty on complete machine - Pump warranty extended to two years with use of Ingersoll Rand's All Season synthetic lubricant, included
- Manufacturers Number: TS4N5
- Brand: Ingersoll Rand®
- Grade: Consumer
- Style: Stationary
- Tank Size: 80 gal.
- Running HP: 5 HP
- Voltage Rating: 230 V
- Phase: Single
- CFM @ 90 PSI: 15.8
- Maximum Pressure: 175 PSI
- Width: 40 in.
- Total Length: 48 in.
- Height: 76 in.
- Weight: 600 lb.
- Warranty: 1 yr. or 2 yr. w/Use of Ingersoll Rand Synthetic Lubricant
- PSI Rating: 175 PSI
- Pump Style: Two-Stage
- Material: Cast IronLearn More
- DCD950 XRP™ 18V cordless hammerdrill with patented 3-speed all-metal transmission and 1/2" self-tightening chuck delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention
- DC390 XRP™ 18V circular saw with 6-1/2" carbide blade can cut 2x4's at a 45° angle in a single pass
- DC385 XRP™ 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
- DC825 18V impact driver with 1,330 in-lbs of maximum torque
- DC411 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applications
- DW919 18V flexible floodlight provides hands-free use
Regular Price: $911.97
Special Price: $820.77
- Pin releases to allow drawer to be removed when necessary
- Thumb-controlled latch release is easy to reach and offers quick, convenient access to contents; latch holds drawer tight when it is closed
- Handles are protected from damage inside recessed area
- Industrial-grade aluminum construction is fully welded for strength; .125 aluminum top will support 200-pound load
- Movable plastic dividers to easily change the lengths of storage compartments; additional dividers Model 1410980 can be purchased Learn More
Designed for the professional, our 5 HP single stage compressors are ideal for almost anyone, from individuals that thrive on do-it-yourself projects to the professional air compressor user. When performance is defined by maximum operating pressure, increased air flow and extended duty cycles, Ingersoll Rand is the product of choice. You will get a compressor that features maximum air power, reliable precision engineered components and a durable design that is built to last.
- 100% continuous duty applications
- High capacity compressor (up to 18.1 cfm@ 90 pisg) with 60 gallon vertical tank
- Efficient finger valves that are easy to maintain
The 2696-26 M18™ cordless LITHIUM-ION 6-tool combo kit includes the 1/2" Hammer Drill / Driver (2602-20), 1/4" Hex Impact Driver (2650-20), Sawzall® Recip Saw (2620-20), 6 1/2" Circular Saw (2630-20), 4-1/2" Cut-off / Grinder (2680-20) and Work Light (49-24-0171). The M18™ Cordless LITHIUM-ION System's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™ the M18™ cordless system delivers more torque, more power, and longer run-time than the competition.
- (1) 2602-20 M18™ 1/2" Hammer Drill Driver
- (1) 2650-20 M18™ 1/4" Hex Impact Driver
- (1) 2620-20 SAWZALL® M18™ Recip Saw
- (1) 2630-20 6-1/2” Circular Saw
- (1) 2680-20 4-1/2” Cut-Off Grinder
- (1) 49-24-0171 M18™ Work Light
- (2) 48-11-1828 M18™ XC High Capacity REDLITHIUM™ Batteries
- (1) 48-59-1801 1-Hour Charger
- General Purpose SAWZALL® Blade
- Contractor Bag
- M18™ Cordless 1/2" Hammer Drill / Driver with Milwaukee 4-Pole Frameless Motor delivers 525 in-lbs of peak torque, 0-550/0-1,700 RPM, & 29,000 BPM
- M18™ 1/4" Hex Impact with the Milwaukee 4-Pole Frameless Motor Delivers 1400 In-lbs of Torque
- M18™ Sawzall® Reciprocating Saw with Patented Gear-Protecting Clutch and Counter Balance Mechanism
- M18™ 6 1/2" Circular Saw Delivers 3,500 RPM with Magnesium Upper and Lower Guards for Maximum Durability
- M18™ 4-1/2" Cut-Off Grinder is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions
- M18™ Work Light Provides a Fold-Away Hook for Hands Free Use and a 135-Degree Rotating Head to Direct Light at the Work Area
- DPM™ - Digital Power Management: Overload protection prevents damage to the tool and battery in abusive situations
- Compatibility: Works with M18™ XC High Capacity RED LITHIUM™ Batteries and M18™ Compact RED LITHIUM™ Batteries
Voltage 18V Battery (2) M18™ XC High Capacity RED LITHIUM™ Batteries Charger 1-Hour Charger Number of Tools 6 Carrier Contractor Bag
The Handler® 190 wire feed welder provides a low cost option to weld aluminum with a small frame MIG welder. The spool gun circuitry is already built in so no extra kits or controls are required. With the optional direct plug-in SpoolRunner™ 100 spool gun, you can eliminate feeding problems associated with aluminum wire – it can also be used with mild or stainless steel wire.
The Handler® 190 features a 7-position voltage switch and infinite wire feed speed control creating a welding arc that more perfectly matches metal thickness and wire diameter than any competitor in its class - less spatter, professional bead appearance, excellent penetration and minimal post-weld cleanup. The Handler 190® operates on 230V input power and offers an output range of 25 to 190 amps, allowing users to weld materials as thin as 24 gauge and as thick as 5/16 inch.
The optional SpoolRunner™ 100 direct plug-in spool gun is great for welding aluminum – no more wire feed problems! Just plug the SpoolRunner™ 100 into the Handler® 190 and its ready to go!
- 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter for a better bead appearance and less cleanup
- Welds 24 gauge up to 5/16 inch steel
- Spool gun control circuitry is built-in to the Handler® 190 for the optional SpoolRunner™ 100 direct plug-in spool gun. Alleviates feeding problems with soft aluminum wires. Also useable with mild or stainless steel welding wires.
- Proven built-in wire feeder with quick-release drive roll lever
- Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding
- Easy access to polarity changeover includes storage holes for spare tips
- Dual groove drive rolls make it easy to switch from one wire size to another. One knurled groove and one smooth groove for .030-.035 in. (0.8-0.9 mm) wire.
- Self-resetting thermal overload and motor protection
- Comfortable 10 ft. (3 m) H100S4-10 welding gun
- Built-in gas valve
- Dual gauge regulator and gas hose
- Power cord with plug
- 10 ft. (3 m) work cable with clamp
- Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
- 8 in (203 mm) wire spool adapter
- Extra .030 in. (0.8 mm) contact tips
- Weld set-up chart
- 1 Phase
Material Thickness: Welds 24 gauge up to 5/16 inch
Skill Level: Low
- Auto Body
- Rated Output at 30% Duty Cycle: 130 A at 21.5 VDC
- Current Range: 25 - 190 A
- Max. Open-Circuit Voltage: 31 V
- Wire Feed Speed Range:
- 40 - 700 IPM
- 50 - 740 IPM at no load
- Amps Input at Rated Load, 60 Hz:
- 230 V - 20.5
- kVA - 4.7
- kW - 3.88
- H: 12-3/8 in (315 mm)
- W: 10-5/8 in (270 mm)
- D: 19-1/2 in (495 mm)
- Net Weight: 68 lb (31 kg)
Designed for heavy shop or industrial use, Ingersoll Rand Electric-driven Two-stage air compressors provide the reliability and performance that are ideal for most applications and users including automotive service and body shops, fleet maintenance, machine shops, production and manufacturing lines, wood working shops, dry cleaners, car washes, general maintenance/repair shops and farms.
- Durable cast iron design for 100% continuous duty application
- Precision engineered components for high reliability
- Individually cast cylinders, overhung crankshaft and one piece connecting road for ease of maintenance and service
- High efficiency finger valves
- 175 psig maximum operating pressure for applications requiring high air capacity and pressure
Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals.
The AirForce™ 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce™ 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 V generator power outlet of 8 kW or more.
Compared to the complexities of an oxy fuel cutting torch system, plasma cutting is easy
- Cuts faster than oxy fuel
- More precise cut, thinner kerf, less slag to clean up
- Smaller heat-affected zone for less warping
- No gas pressure settings or flame tuning needed
- No preheating of metal prior to cutting
- Input Power - 208-230 VAC, 50 amp circuit, single phase
- New Inverter Design - Powerful cutting ability at just over half the weight of prior model (AirForce 625). Weighs only 31.4 lbs.
- Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more.
- New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips.
- Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode.
- Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit.
- Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components.
- Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases.
- Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient.
- Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts.
- Power Factor Correction - Expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops.
- HP-70 torch with 16.5ft (5m) lead and consumables
- 16.5 ft (5 m) heavy duty work clamp
- 10 ft. (3 m) power cord with 230 VAC, 50 A plug
- Sheet Metal
- Auto Body
- Rated Output at 50% Duty Cycle: 40 A, at 140 VDC
- Max. Open-Circuit Voltage: 400 V
- Amps Input at Rated Output, 60 Hz: 208 V -33, 230 V 30
- kVA: 6.8
- kW: 6.6
- Plasma Gas Flow/Pressure: 4.8 CFM (136 L/min) at 90 –120 PSI (621–827 kPA) Recommended
- H: 11-1/4 in. (286 mm)
- W: 8-1/4 in. (210 mm)
- D: 14-1/4 in. (362 mm)
- Net Weight: 700i w/torch: 31.4 lb (14.2 kg)
- Ship weight: 35.8 lb (16.2 kg)