These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18-inch flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tranwire leads.
Pro/Tran transfer switches feature a rugged powder-coated steel cabinet with six combination 1/2-inch and 3/4-inch knockouts, resettable branch rated circuit breakers and non-defeatable (break-before-make) double-throw switches. Some models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.
All Pro/Tran models with the suffix "A", plus the 30508B, include a separate flanged inlet for direct generator connection in a dry location. It is recommended that all manual transfer switches installed indoors be used with an appropriate power inlet box. All other Pro/Tran models are intended for hardwire installation to a power inlet box, but include a covered opening to accommodate a power inlet for installation in a dry location.
A wattmeter panel (WP7500) is available for all models without meters (except models 15114A and 30114A). The wattmeter panel includes an opening, with cover, for an optional power inlet.Learn More
Dee Zee Dog Box - Provides safe and convenient transportation for your dogs. Made from heavy duty Brite-Tread aluminum. Improved door design eliminates sharp edges. Vented for proper air circulation. New and improved latches accept your padlock for security. Bolt together design assembles in minutes and collapses for storage.
- Dee Zee Single Dog Box
- Non-Rusting .056 Brite-Tread Aluminum
- Bolt-Together Design Assembles in Minutes
- Design Eliminates Sharp Edges
- Vented Door For Proper Air Circulation
- Improved Latch Secure Doors Tightly
- Includes All Hardware and Assembly Tools
- Rubber Gasket Eliminates Door Noise
- L: 18.75" x W: 29" x H: 20" Vol: 6 cu. ft.
- Made In USA
- Limited-Lifetime Warranty
Make your pick up truck do the heavy lifting and save your aching back. With the Black Bull Pick Up Truck Crane you can easily lift up to 1,000 pounds into your truck bed. The hydraulic ram with locking handle gives the Pick Up Truck Crane lifting power. With a stationary base and a removable arm that swivels 360 degrees you can get almost anything from the ground to your truck bed, and back out again, without lifting a thing. When you mount the Black Bull Pick Up Truck Crane to your truck bed, you can move generators, drills, tool boxes, sheetrock, plywood, and more.
- Mounts to your pick-up truck bed
- Removable arm allows for easier storage in truck bed after use
Max. Lifting Capacity (7"-63") 1000 lbs Max. Lifting Capacity (0"-72") 400 lbs Steel Box Tube Boom 3/16" Stationary Base 10.75" x 10.75" Arm Swivels 360 degrees Working Range 30.5" to 51" Lifting Range 0" to 79"
This economy line cross bed truck tool box measures 70.5 in. long x 16 in. wide. Fits most full-size truck beds with dual lid. Made of .056 aluminum and has a bright finish. Heavy duty gas spring to hold up lid. Full lid gasket to prevent leakage. Heavy duty double latch system to protect valuables.
- Economy line truck box with dual lid and lid gasket to prevent leakage
- Fits most full size trucks
- Heavy duty gas spring to hold lid up
- Heavy duty double latch system to secure valuables
This air piping system is designed for air tools that require a constant supply of air and is great for large buildings. The piping is made of a high-density polethylen (HDPE) tubing and also features an aluminum core to hold any shape it is bent to and allow simple wall installation.
- 100 Feet Tubing
- 175 PSI operating pressure
- 3 Outlet Kits
- 2 Tees
- 1 Male 3/4" NPT Fitting
- 20 Clips
- Bevel and Cutter Tool
Add the Tradesman 70 in. Aluminum Full-Size Side-Mount Truck Box to your truck bed and conveniently store tools, valuables and more. This truck box locks with a key and its gas shocks provide for smooth lid operation.
- Enclosed, locking storage for most full size trucks
- 0.060 Aluminum finished black
- Keyed lock
- Push button for easy access
- Heavy duty gas shocks for smooth open and close
- Dimensions: 70” Long x 8” wide x 14” High
Fits Hi-Side Box models 347/391-0-02.
- #7 in picture
Flush mount design provides a clean look and an unobstructed view of the road.
- Angled at bottom of front and side walls to accommodate sloped bed walls and wheel wells
- Offset lid construction allows lid to open fully without back wall interference
- .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Sturdy, one-piece, no sag base design
- H: 19.75in
- W: 51in
- D: 21.25
Dee Zee Tool Box - Hardware Series Single Lid Crossover. Constructed of heavy duty steel. Protected by texture black NRT (No Rust Technology) rust inhibitor powder coat finish. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
- HARDware Series - Crossover Tool Box
- 20-Gauge Steel Construction
- Texture Black Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Lockable Stainless Steel Paddle Handle Latches
- Double V-Pan Lid Stiffener Creates Strength And Rigidity
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- Made In USA
- Limited-Lifetime Warranty
Features: Delta Slimline Fullsize Single Lid Aluminum Crossovers provide secure storage where space is limited. High-strength bodies, adjustable heavy-duty lid strikers & reinforced lids protect the contents. Leak-proof paddle handles and full weather stripping seal out moisture. Beveled Edge Lid is reinforced with a large pan bolster for increased strength and rigidity. Heavy-Duty Adjustable Lid Strikers to keep the lid locked down tight for exceptional strength and security. High-Strength Body with wide top flanges resists cargo damage and attempted break-ins. Self-Rising Lid has a center-mounted gas spring lid lift for easy, quicker loading and unloading. Leak-Proof Stainless Steel Paddle Handles and Full Weather Stripping prevent moisture and dust from entering.Learn More