$399.00The 2797-22 M18 FUEL™ Cordless 2-Tool Combo Kit includes the M18 FUEL™ 1/2" Hammer Drill/Driver (2604-20) and M18 FUEL™ 1/4" Hex Impact Driver (2653-20). M18 FUEL™ features a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Electronic Intelligence and REDLITHIUM™ Battery Technology, this results in longer motor life, more run time and more power. The POWERSTATE™ brushless motor works harder and lives longer than all leadingcompetitors, while reducing noise and cooling more rapidly to deliver years of maintenance-free performance. The Milwaukee REDLITHIUM™ XC4.0 Battery is the most durable pack on the market and provides up to 2X more run time than standard Lithium-Ion batteries. REDLINK PLUS™ Intelligence hardware and software is the world’s most advanced system of cordless power tool electronics that will maximize performance and protect the user’s investment.Learn More
These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18-inch flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads. Pro/Tran transfer switches feature a rugged powder-coated steel cabinet with six combination 1/2-inch and 3/4-inch knockouts, resettable branch rated circuit breakers and non-defeatable (break-before-make) double-throw switches. Some models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range. All Pro/Tran models with the suffix "A", plus the 30508B, include a separate flanged inlet for direct generator connection in a dry location. It is recommended that all manual transfer switches installed indoors be used with an appropriate power inlet box. All other Pro/Tran models are intended for hardwire installation to a power inlet box, but include a covered opening to accommodate a power inlet for installation in a dry location. A wattmeter panel (WP7500) is available for all models without meters (except models 15114A and 30114A). The wattmeter panel includes an opening, with cover, for an optional power inlet.Learn More
International VRT-4210BU 42-inch 10 Drawer Blue Tool Chest with Heavy Duty Ball Bearing Drawer Slides$392.97
International VRT-4210BU 42-Inch 10 Drawer Blue Tool Chest with Heavy Duty Ball Bearing Drawer Slides. 45mm ball bearing drawer slides with strong d tente to prevent drawers from accidentally opening. Full width drawer pulls with strong d tentes. All drawers come equipped with pre cut drawer liners. Full length brushed aluminum drawer trim. Aluminum corner trim provides added protection.Learn More
The Reliance Pro/Tran R Series(NEMA 3R) transfer switches are ideal for outdoor installation in residential and commercial applications. The gasketed steel cabinet is powder-coated, with padlockable cover, and will accommodate the generator cord with the cover closed. Included is 16-inch length of flexible non-metallic, liquid-tight conduit with fittings. Simply mount the cabinet, attach the conduit and feed the clearly-marked wires from the transfer switch into the load center. Then select the load center circuits needed in an emergency and connect them to the wires leads from the transfer switch. Each cabinet includes six combination 1/2-inch and 3/4-inch knockouts, one on each side, two on the bottom and two on the back.
All Raintight Pro/Tran transfer switches feature branch-circuit rated breakers, heavy-duty power inlet and non-defeatable (break-before-make) double-throw switches. All 125/250V models feature exclusive Reliance wattmeters with accuracy of ± 3% throughout the entire range.Learn More
Delta PRO Single Lid and Dual Lid Steel Crossovers provide superior security for tools and equipment. The combination of our Gear-Lock System, reinforced lids, and our high-strength body will resist up to 1,000 pounds of prying force to break in.
- Gear-Lock self-adjusting dual rotary locking system always latches and closes for superior security
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- High-strength, self-rising lids will resist attempted break-ins better than other steel lids
- High-strength body resists cargo damage and protects the lock system
- End-mounted push buttons provide easy access; lid locks and unlocks from either side for security and safety
- Heavy-duty guards on single lid models protect the vertical-action gas spring lid lifts and help ensure long-term durability
- Built-in storage bin on both ends and 4-compartment sliding tray for convenient hand tool and small item storage
Top Mount truck boxes have a double box design to provide additional storage without losing valuable truck bed space. Hand wielded by specially trained craftsmen and with weatherproof gaskets to prevent leaks.
- Designed for strength with weather proof gaskets
- Front opening protects contents from the elements
- Locking stainless steel flush mount T-handle provides security
- Available in several sizes: 72", 90" and 96"
- Available in diamond-tread Bright finish
- Sturdy .060" Aluminum resists rust Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Ethafoam mounting strips protect truck's finish
- Sturdy, one-piece, no sag base design
Fits 42" Shelves.
- 46" Height
- 8 Dividers
Shelf unit for Rapid Mount Shelving.
- Dimensions: 62" H x 52" W x 16" L
- 4 Shelves
- 8 Dividers
- (Four 16" Standard Dividers and four 13" Narrow Dividers included with each shelf unit)
Side Channel Kit, Used On Extended Cab And Crew Cab - Short Bed Trucks With No Camper Or Utility Shell On Truck, 13 Ga, Steel Tubing, Marine-Grade Powder Coat Finish, Load Capacity 1700 Lb, Includes Mounting HardwareLearn More
Dimensions: H: 18 1/4 W: 18 1/8 L: 30 1/8
Weight (lbs.): 70
Cubic feet: 5.6
- Stainless Steel D-Handle
- Aluminum Door and Hinge
- Three Point Latching System
- 14 gauge steel picture Frame Body Design
- Available in White Armor-Tuf Finish or Black Armor-Tuf Finish (530-5-01)