With a 4 Ton lifting capacity, this Bottle Jack can lift loads weighting up to 8,000 lbs. Change the tires on cars, trucks, and trailers or make repairs to your tractor, combine or hay baler. Small, portable and reliable, this is a great jack to keep nearby for emergency repairs. A cast iron base bears the load and a cleated non-slip lift cap keeps it stable. The hydraulic bypass prevents ram over travel and prevents damage to the Jack. The pump cartridge is replaceable, so you don’t have to replace the entire jack when the hydraulic has been exhausted. With a lift range of 7.75 to 12.75 inches (with the screw lift fully extended), the Black Bull Bottle Jack can get the heaviest of loads into the air and out of the way so you can make the repair and move on to other projects.
- Easily lift heavy loads weighting up to 8,000 lbs, reliable and portable design
- Great for use on the shop, farm, or job site
- Cleated non-slip lift cap, adjustable extension screw cap, replaceable pump cartridge
- Solid cast iron base for maximum stability, base dimensions: 3 7/8 inches x 3 1/2 inches
- Hydraulic bypass prevents ram over travel, lift height 7.75 to 12.75 inches, weights 6.7 lbs
Regular Price: $29.99
Special Price: $21.99
Plano storage trunk provides weather-resistant storage wherever you need it. Extra-large 27.4-gallon capacity is perfect for all your bulky and oversized equipment. Two integrated wheels allow for easy transport. U.S.A.
- 4 heavy-duty latches
- Tie-down brackets on each end
- 2 recessed handles
- 3 padlock tabs for security
- Molded grooves for stacking
- Airline approved
- Heavy-duty impact-resistant plastic
- 37 3/4in.L x 18 1/4in.W x 14in.H
- 3.7 cu. ft. capacity
- Multi-Drawer Design for Storing a Wide Variety of Parts and Supplies Includes Drawer Stop Tabs to Prevent Spilling of Contents.
- See-through drawers for quick identification of contents.
- Large ribbed drawer pulls for easier access to contents.
- Wide frame for additional strength and rigidity.
- Easily mounts to wall or stands on bench or counter top.
- Contains 60 medium drawers.
- Available in Silver / Gray
Dee Zee Tool Box Accessories - Vented Gas Cap. An exact replacement of the gas cap that comes with all Dee Zee tanks. Vented to alleviate pressure from vapor build up. Comes with vented cap and neck.
- Transfer Tank Service Part
- Vented Gas Cap
- Replaces Dee Zee Transfer Tank Cap
- Alleviates Dangerous Build Up of Vapor
- Sold Individually
This Compressed Air Outlet can be mounted wherever you need compressed air.
- (1) 90120 Aluminum Outlet Block
- (1) 50100 3/8” NPT Straight
- (1) 50300 Union Elbow
- (1) 50120 Drain Valve
- (1) 50125 ¼” NPT Brass Nipple
- (1) 50130 ¼” NPT Brass 45 Degree
- (1) 50135 3/8” NPT Brass Plug
Adapts to surface, in wall or ceiling mount
The Metal Man AB1300S Auto-Darkening welding helmet is built for the hobby welder. This fully automatic helmet gives the user the ability to make adjustment to important controls such as shade, sensitivity and delay. The adjustable head gear makes it a comfortable fit. With ANSI and CSA approval, the Metal Man Hobbyist helmet is safe and functional at a value price.
- Viewing Area 3.86 in. x 1.73 in.
- Variable Shade Control 9 to 13
- Auto On/Off
- Adjustable Sensitivity
- Adjustable Delay
- Switching Time 1/10,000 second
- Solar Power Supply
- Low Amp to 10 Amp
- UV/IR Protection to Shade 16
- ANSI and CSA Approval
- 5 Point Adjustment Head Gear
Use with the following Racks:
- Steel Ladder Rack models 1450 & 1475
- Fast Rack model 1280
- Steel Truck Rack model 1225, 1345 & 1375
- Steel Van Rack models 220 & 221
- Aluminum Rack models 209, 211, 213, 218, 219, 222, 229, 2095, 2097 & 2136
- Steel All-Purpose Rack models 205, 215, 216, 2055 & 2056
- A 7.2V lithium-ion battery for longer run time and up to 18 months storage time on a charge
- 1000s of household, hobby, and project uses: cut, saw, sand grind, carve, drill, polish, buff, sharpen, clean, and more
- Built-in LED light illuminates work area
- Comfortable fingertip grip for precision applications.
- Spindle lock for easy accessory changes
- Variable speed (8,000-18,000 rpm) for many applications
- Accepts all standard hobby tool accessories including Dremel® accessories
- Convenient docking cradle for storage and charging
- Includes 65 accessories
- 2 Year warranty
- ETL listed Charger
Includes: Docking Charger, Adaptor and 65-Piece Accessory Set
- Mandrels: 4 Pieces Bands: 2 Pieces. 3/32” And 1/16”
- Sanding Wheels: ½” 3 Pieces, ¼” 3 Pieces
- Polishing Wheels: ½” 2 Pieces, ¼” 2 Pieces
- Polishing Paste: 1 Piece Nylon Cup Brush: 1 Piece
- Nylon Wheel Brush: 1 Piece Drill Bits: 3 Pieces: 1/8”, 3/32” 1/16”
- Silicon Carbide Grinding Stone: 2 Pieces: 25/32”, 7/16”
- Aluminum Oxide Grinding Stone: 1 Piece 3/8”
- Diamond Grinding Point 1/8” : 6 Pieces
- Cut-Off Wheels: 15/16”X 1/32”: 34 Piece
- Charger Input: 120 Volts AC, 60 HZc
- Motor: 7.2V DC
- No Load Speed: 8,000-18,000 RPM
- Battery Capacity: 1100 mAh
- Collet Size: 1/8”, 3/32”, 1/16”/li>
- Net Weight: 1.5 Lbs/li>