- Horizontal “D” Handle for User Comfort
- Lock-off Safety Buttons Operated by Left or Right Hand
- Belt-Drive Design for Smooth, Quiet Operation
- External Accessible Brushes for Easy Inspection and Replacement
- Built-In Laser-Light Cutting Guide for Quicker Alignment and Improved Accuracy
- Double-Rail Sliding System Handles Stock up to 13-3/8 inch
- Hold Down Clamp Secures Stock For Improved Accuracy
- Heavy-Duty 15 Amp, 3,800 RPM Motor
- Adjustable Extension Arms Provide Extra Support for Cutting Longer Materials
- Spindle Lock For Quick Blade Changes
- Die Cast Aluminum Base for Portability
- Tall Sliding Fences Provide Extra Vertical Cutting Capacity Against the Fence
- Bevel Cuts Up to 45 Degrees LEFT and RIGHT
- Make Precision Miter Cuts Up to 50 Degrees Left and Right, with 9 Positive Stops at Common Angles
Includes 80T Carbide Tipped Blade, Hold Down Clamp, Dust Bag, Extension Wings and Blade Wrench
- Model: GMSDB1512L
- Rated Power: 120V~/ 60HZ, 15 Amp
- No Load Speed: 3,800 RPM
- Blade Size: 12” (305mm)
- Arbor Size: 5/8”
- Bevel: 45° Left and Right
- Miter: 50° Left and Right
- Cutting Capacity (Base molding vertical against fence): Up to 5-1/2”
- Cutting Capacity (Crown molding vertically nested): Up to 6-1/4”
Max Cutting Capacity:
- 0° x 90°: H 3-1/2” x 13-3/8”
- 45°x90°: H 3-1/2” x 9-3/8”
- 0°x 45°: H 2-1/8” x 13-3/8”
- 45°x45°: H 2-1/8”x 9-3/8”
- Class II Laser
- Wave Length: 650 nm
- Max Output <1.0 mw
Delta Aluminum Transfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate aluminum, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- All tanks are pressure tested for leaks.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 37 Gallons
- Maximum Fill Capacity: 42 Gallons
Fits Hi-Side Box model 290-5-01.
- #7 in picture
- Includes Weather Strip, Decal, and Bolt Kit.
Dee Zee Transfer Tanks - A safe and convenient means for transporting non-flammable liquids. Steel, protected by white NRT (No Rust Technology) rust inhibitor powder coat finish. Radius curve design eliminates key weld pressure points. Feature 3 stability baffles, lockable cap, .375" drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Not designed for use as an auxiliary fuel system. Not for use with gasoline. Does not meet title 49 of the United Stated Federal Registry.
- Specialty Series Transfer Tank
- Heavy-Duty 14-Gauge Steel
- Texture White Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Radius Curve Eliminates Weld Pressure Points
- Includes Cap And Coupler For Venting
- 3 Stability Baffles And Drain Plug
- Volume: 38 Gallon Capacity
- Skinny Rectangle - L: 59.5 :_mage_bind_var_51 x H: 19"
- Made In USA
- Limited-Lifetime Warranty
Delta Single Lid Crossover models provide easier access to longer cargo. Lid locks and unlocks from the driver's side and opens from either side. Mid-Lid design offers a 40% larger opening than Gull Wing models. Lids lock, unlock, and open from the same side.
- Beveled edge lids are reinforced with a large, pan-style bolster
- Self-rising lids have reliable gas spring lid lifts for easier access
- Stainless steel paddle handles for long-term durability
- Full weather stripping helps seal out moisture and dust Learn More
Tanks are available in rectangular, vertical or L-shaped configurations to meet a variety of applications for your truck.
- L-shaped tanks are designed to accommodate our full-size, crossbed boxes
- Not intended for transferring gasoline or other flammables, and should not be used as an auxiliary fuel tank
- Does not meet DOT specifications
- Lockable Vent Caps
- Base mounting tabs
- Baffles provide an even flow of liquid
- Availabe in White or Black finish
- Sturdy 14 gauge steel
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Aerodynamic domed lid adds strength
- Ethafoam mounting strips protect truck's finish
- Sturdy, one-piece, no sag base design
Use with EZ-Glide Ladder Rack model 251-3-01.Learn More
Shelf unit for Rapid Mount Shelving.
- Dimensions: 46" H x 36" W x 16" L
- 3 Shelves
- 8 Dividers
- (Four 16" Standard Dividers and four 13" Narrow Dividers included with each shelf unit)
Install the Tradesman 60 in. Aluminum Mid-Size Cross-Bed Truck Box to add valuable enclosed storage to your truck. This truck box features dual lids, each with its own push button.
- Cross bed storage for most mid size trucks
- Made of 0.060 gauge aluminum
- Dual lids with push buttons for easy access
- Allows storage underneath