- Horizontal “D” Handle for User Comfort
- Lock-off Safety Buttons Operated by Left or Right Hand
- Belt-Drive Design for Smooth, Quiet Operation
- External Accessible Brushes for Easy Inspection and Replacement
- Built-In Laser-Light Cutting Guide for Quicker Alignment and Improved Accuracy
- Double-Rail Sliding System Handles Stock up to 13-3/8 inch
- Hold Down Clamp Secures Stock For Improved Accuracy
- Heavy-Duty 15 Amp, 3,800 RPM Motor
- Adjustable Extension Arms Provide Extra Support for Cutting Longer Materials
- Spindle Lock For Quick Blade Changes
- Die Cast Aluminum Base for Portability
- Tall Sliding Fences Provide Extra Vertical Cutting Capacity Against the Fence
- Bevel Cuts Up to 45 Degrees LEFT and RIGHT
- Make Precision Miter Cuts Up to 50 Degrees Left and Right, with 9 Positive Stops at Common Angles
Includes 80T Carbide Tipped Blade, Hold Down Clamp, Dust Bag, Extension Wings and Blade Wrench
- Model: GMSDB1512L
- Rated Power: 120V~/ 60HZ, 15 Amp
- No Load Speed: 3,800 RPM
- Blade Size: 12” (305mm)
- Arbor Size: 5/8”
- Bevel: 45° Left and Right
- Miter: 50° Left and Right
- Cutting Capacity (Base molding vertical against fence): Up to 5-1/2”
- Cutting Capacity (Crown molding vertically nested): Up to 6-1/4”
Max Cutting Capacity:
- 0° x 90°: H 3-1/2” x 13-3/8”
- 45°x90°: H 3-1/2” x 9-3/8”
- 0°x 45°: H 2-1/8” x 13-3/8”
- 45°x45°: H 2-1/8”x 9-3/8”
- Class II Laser
- Wave Length: 650 nm
- Max Output <1.0 mw
$248.97The Champion 66520 2 in Semi trash pump with hose kit is a powerful pump that is light, compact and efficient. The unit is powered by a 196 cc Champion Single cylinder, 4-stroke OHV engine with a .9 gal. fuel tank and 0.63 qt. oil capacity. The recoil start makes this pump easy to set up and run. Integrated 6 in. never flat wheels and fold away handlebar allow for the portability necessary to take the pump where you need it most. CARB approved for sale in all 50 states.Learn More
- Easy pull recoil start
- 4-stroke, air-cooled 196 cc champion OHV engine
- Cast iron engine sleeve for durability
- Low oil shut-off
- 2 in. NPT diameter inlet/outlet
- Total head 98 ft./suction head 26 ft.
- Maximum delivery volume 158 gal./minute
- Maximum solids diameter 9/16 in.
- 0.87 in. diameter tubular steel frame (roll cage) for protection and durability
- Fold away handlebar for portability and safety
- 6 in. never flat tires
- Complete hose kit includes: 12 ft. intake hose, cam action quick coupler, intake strainer, 20 ft. discharge hose, hose clamps, Teflon tape
The TAWB56W is an aluminum flush mount design that provides a clean look and an unobstructed view of the road. Made of .060 in. aluminum. New wider design. Offset lid construction allows lid to open fully without back wall interference. Strong double latch paddle handles protect your valuables.
- Fits full size trucks with a wider design
- Offset lid construction allowing lid to open fully without back wall interference
- Strong double latch paddle handle protects your valuables
- Bright finish
Maintenance kits are designed, manufactured and tested specifically for your generator's needs to help deliver optimum performance. Popular maintenance products are included in one kit for quick and easy servicing.
- Air filter
- 8 spark plugs
- Oil filter
With the Thoroughbred acetylene welding gas cylinder you'll never pay lease or rent charges again! Brand new industrial-grade welding gas cylinder has never been filled. Refillable and exchangeable. Provides approx 1 1/2 hr. burn time when matched with the same size oxygen cylinder, using an oxyacetylene cutting torch.Learn More
Innerside Boxes mount on top of the bed side rails or walls. The lower part of the box extends down the inside of the side rails or walls.
They are ideal for storing longer tools and can be used individually or in pairs.
Combine a pair of Innerside Boxes with a Crossover to create a wraparound storage system on your truck.
Measure the length of your truck’s side rails or walls to determine the length of Innerside Box you can install on your truck. If used with a Crossover, deduct the space needed for it and allow a 1” space between the Crossover and the Innerside Boxes for the lids to open and close without interference.
Innerside Boxes come with support legs and mounting hardware.
- Gear-Lock Locking System
- Resists over 1000 Lbs of break-in force.
- Built-in Full-length Storage Compartments
- Provides storage for small parts and tools.
- High Strength Body Design
- Resists cargo damages and attempted break-ins.
- 3 Layer RSL Lid
- Provides superior lids strength and rigidity
- Self aligning lid latch pins pivot side to side to ensure the lid seals tight.
- Angled at bottom of front and side walls to accommodate sloped bed walls and wheel wells
- Offset lid construction allows lid to open fully without back wall interference
- .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Sturdy, one-piece, no sag base design
Slim Line Series; Single Lid Crossover Tool Box; L 60 in. x W 12 in. x H 9.25 in. Fully Foamed Lid Prevents Bending/Warping. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts Automatically Close. MicroSeal+ Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. 3 Compartment Sliding Tray. 2 Built In Tool Trays.Learn More
Shelf unit for Rapid Mount Shelving.
- Dimensions: 36" H x 60" W x 13" L
- 2 Shelves
- 8 Dividers
Shelf Center Support included with 60" wide shelving units.Learn More