Design that provides a clean look and an unobstructed view of the road. Made of .060 in. aluminum. Offset lid construction allows lid to open fully without back wall interference. Ideal for 5th wheel cargo space. Strong double latch paddle handle to protect valuables.
- 48 inch chest box to use as hitch receiver box
- Made of .056 diamond plate aluminum
- Heavy duty double latch paddle handle to secure valuables
- Bright finish
Slim Line Series; Single Lid Crossover Tool Box; L 63 in. x W 12 in. x H 9.25 in. Fully Foamed Lid Prevents Bending/Warping. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts Automatically Close. MicroSeal+ Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. 3 Compartment Sliding Tray. 2 Built In Tool Trays.Learn More
Install the Tradesman 60 in. Aluminum Mid-Size Cross-Bed Truck Box to add valuable, protected storage to your mid-size truck. This truck box features a push button at either end and gas cylinders that make it easy to open and close. Bed storage below is maintained.
- Enclosed Cross bed storage for most mid size trucks
- 0.060 Aluminum painted electrostatically to maximize resistance to abrasion and corrosion
- 1 Push button on each end and gas cylinders for easy access
- Ethafoam mounting strips protect truck's finish
- Allows bed storage underneath
- Base will not sag
This oil free, direct drive air compressor is packed with enough power to to handle most household DIY jobs. The vertical tank design takes up less space in your garage and the 7 in. wheels make this unit easy to move around.
- 5 HP oil free direct drive induction motor
- No belts or pulleys to maintain
- No oil to add or change
- 4.8 SCFM @ 40 PSI
- 3.5 SCFM @ 90 PSI
- 125 Max PSI
- 7 in. wheels
- 20 gallon ASME certified tank
- Size: 20 Gallons
- Style: Vertical Portable
- ASME Approved: Yes
- Style: Oil-Free Direct Drive
- Construction: Aluminum
- Lubrication: Oil Free
- 4.8 CFM's @ 40 PSI
- 3.5 CFM's @ 90 PSI
- Operating Pressure: 125 PSI
- Maximum Pressure: 125 PSI
- Source: Electric
- Horsepower: 1.5
- Volt/Amp/Phase: 120/0/
- Dimensions (LxWxH): 18 x 18 x 43
- Weight: 101 Pounds
- Certification: UL
Maintenance kits are designed, manufactured and tested specifically for your generator's needs to help deliver optimum performance. Popular maintenance products are included in one kit for quick and easy servicing.
- Air filter
- 8 spark plugs
- Oil filter
Our standard and low profile cross bed boxes are designed to fit most full-size trucks and allow storage under the box. Several models to choose from include Gull-wing or Full (single) lid. Our low profile truck boxes provide our customers with maximum rear window visibility and aerodynamic styling for today's sleek truck designs.Product Features
- Larger 5/16" adjustable striker pin head
- Gas cylinders allow easy access
- Optional double latch system or push button design
- Weatherproof gasket prevents leakage
- Available in Bright or Black finish
- .060" Aluminum resists rust
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
- Ethafoam mounting strips protect truck's finish
Never pay lease or rent charges again! Brand new industrial-grade welding gas cylinder has never been filled. Refillable and exchangeable. Provides approx 1 1/2 hr. burn time when matched with the same size acetylene cylinder, using an oxyacetylene cutting torch.Learn More
Dee Zee Tool Box - Specially Narrow Crossover box. Constructed of durable Brite-Tread aluminum. Black-Tread powder coat, provides a gloss black finish while it protects and prevents oxidation. Other features: lockable push-button handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. J-Bolt mounting hardware included. Ideal for today's short bed crew cab or any truck that doesn't want to lose valuable bed space.
- Specialty Series Narrow Crossover Tool Box
- Non-Rusting .056 Brite-Tread Aluminum
- Protective Gloss Black Powder Coat Finish
- A Narrow Profile To Save Space In The Truck Bed
- Lockable Stainless Steel Paddle Handle Latches
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Crowned Lid With Full Length Hidden Hinge
- Front, Back And Bottom Are Bent From A Single Piece Of Aluminum
- Made In USA
- Limited-Lifetime Warranty
Innerside Boxes mount on top of the bed side rails or walls. The lower part of the box extends down the inside of the side rails or walls.
They are ideal for storing longer tools and can be used individually or in pairs.
Combine a pair of Innerside Boxes with a Crossover to create a wraparound storage system on your truck.
Measure the length of your truck’s side rails or walls to determine the length of Innerside Box you can install on your truck. If used with a Crossover, deduct the space needed for it and allow a 1” space between the Crossover and the Innerside Boxes for the lids to open and close without interference.
Innerside Boxes come with support legs and mounting hardware.
- Gear-Lock Locking System
- Resists over 1000 Lbs of break-in force.
- Built-in Full-length Storage Compartments
- Provides storage for small parts and tools.
- High Strength Body Design
- Resists cargo damages and attempted break-ins.
- 3 Layer RSL Lid
- Provides superior lids strength and rigidity
- Self aligning lid latch pins pivot side to side to ensure the lid seals tight.