Pliers, Nippers & Specialty Tools
Nothing is more frustrating than a box full of nails spilling all over your shop floor. Picking them up in ones or twos is a pain. Save time and energy by using this Magnetic Sweeper by Tool Shed! Simply roll over to collect debris and then pull handle for quick release. This sweeper is really handy! A popular choice for the farm, home, shop or garage, this sweeper can grab anything metallic up off the floor. It's just as good at picking up loose change as it is picking up scattered nails and screws. It can also pick up nuts, bolts, pens, and paperclips. This sweeper is incredibly versatile. Its wide sweep means you won't have to make too many passes through and its 7 inch rubber wheels help you turn sharply.
- Picks up nails, tacks, screws, bolts, nuts, clips, and more
- Extra-wide sweep head for quick clean up
- One-pull release quickly clears debris from sweeper
- 50 lbs magnetic pull
- Powder-coated steel handle extends from 30 to 44 inches
- Aluminum magnetic housing
- 7 inch rubber wheels
- 30 inch wide sweep area
Shine more light on the problem with the Pro-Series 60 LED Rechargeable Cordless Work Light. Hang this work light from the hood when working on the car, attach it to the water heater when relighting the pilot light, or hang it from the pipes when unclogging a drain. Keep a Cordless Work Light in the truck for roadside repairs, one in the toolbox for jobs around the house, and one in the camper for night time illumination. Don’t get left in the dark. The Cordless Work Light recharges in about 2 hours with the included 120 volt wall charger and 12 volt auto charger. A built-in hook hangs easily from the hood, or a clip on magnet holds the light onto the fender. 60 LED lights are rated for 100,000 hours of working life and produce the same brightness as an 80 watt bulb. The shatterproof, waterproof, and oil resistant construction can stand up to heavy use.
- Great for cars, campers, boats, and home
- Produces the same brightness as an 80 watt bulb
- Built-in hook for hanging and clip-on magnetic holder
- Includes a 120 volt AC/DC adapter and a 12V car plug charger
- Shatterproof, waterproof, and oil resistant, LED lights are rated for 100,000 hours of working life
- Input:120V AC 60 Hz
- Output: 12V DC 450mA
Build your own custom scaffold tower to fit your specific needs for home repair, maintenance and building construction. The 8 in. Heavy Duty Caster is designed for use with exterior scaffold units. Caster wheels with dual locking foot brakes, allow for easy movement across concrete and other smooth and solid surfaces. That’s a big help when you don’t have time to tear down and rebuild the scaffold. Meets OSHA and ANSI scaffolding regulations.
- For use with exterior scaffold frames
- 800 lb. load capacity
- 8 x 2 in. non-marking wheel
- 1-3/8 in. stem, 1/2 in. hole
- Dual locking with foot brake
- Each caster weighs 12.5 lbs.
- Sold individually
- Meets OSHA and ANSI scaffolding regulations
- These cutters are ideal for use when standard bolt cutters cant handle the job.
- Great for cutting wire fence, cables, mesh, bolts, pad locks and much more.
- Made of drop forged, heat treated, high carbon steel.
- Compound cutting action for heavy duty applications
- CHANNELLOCK® uses high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
- Patented reinforcing edge minimizes stress breakage
- Undercut tongue & groove design won't slip
- Right-angle, laser-heat treated teeth grip better and last longer
- PermaLock® fastener eliminates nut and bolt failure
- CHANNELLOCK BLUE® grips for comfort
This pick and screwdriver set from Titan Tools come with comfortable TRP grips, and a handy nylon storage pouch.
- Utility Picks:
- 90 Degree
- 1/4" radius
- 1/8" radius
- #000 and #00 Phillips
- 3/32" and 1/8" slotted
- Torx Drivers:
A plasma cutter is an essential cutting tool for any garage or shop. Keep your plasma cutter running with the Pro-Series Plasma Cutter Electrode Kit. The kit includes two brass tips, two electrodes and two ceramic collars. Fits plasma cutter make and models with a tip opening that measures .3 inches high (.44 inches high with mounting flange).
- Overall dimensions: 2-3/4 in. L x .568 in. diameter
- .30 with mounting flange (.445 in. diameter x .425 in. H)
- 2 brass tips
- 2 electrodes
- 2 ceramic collars
- Heavy duty construction
- Ideal for cutting large nails
- Laser heat-treated cutting edges last longer
- Only CHANNELLOCK® uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life
- CHANNELLOCK® uses a high-carbon C1080 steel for superior performance on the job and electronic coating for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort