Pliers, Nippers & Specialty Tools
Shine more light on the problem with the Pro-Series 60 LED Rechargeable Cordless Work Light. Hang this work light from the hood when working on the car, attach it to the water heater when relighting the pilot light, or hang it from the pipes when unclogging a drain. Keep a Cordless Work Light in the truck for roadside repairs, one in the toolbox for jobs around the house, and one in the camper for night time illumination. Don’t get left in the dark. The Cordless Work Light recharges in about 2 hours with the included 120 volt wall charger and 12 volt auto charger. A built-in hook hangs easily from the hood, or a clip on magnet holds the light onto the fender. 60 LED lights are rated for 100,000 hours of working life and produce the same brightness as an 80 watt bulb. The shatterproof, waterproof, and oil resistant construction can stand up to heavy use.
- Great for cars, campers, boats, and home
- Produces the same brightness as an 80 watt bulb
- Built-in hook for hanging and clip-on magnetic holder
- Includes a 120 volt AC/DC adapter and a 12V car plug charger
- Shatterproof, waterproof, and oil resistant, LED lights are rated for 100,000 hours of working life
- Input:120V AC 60 Hz
- Output: 12V DC 450mA
Process your own sausage, bratwurst and hamburgers with ease using the Sportsman Series Cast Iron Meat Grinder. Blend meat with your favorite seasonings for fresh and healthy homemade meals. Use your own casing for homemade sausage, pepperoni and bratwurst. Add your own spices and seasonings to make each recipe just the way you like it. You can even grind vegetables to prepare great tasting meals. Hand grind up to 4 pounds of rabbit, venison, pork, beef, chicken and turkey per minute. The cast iron body is durable and easy to clean. Two #22 grinding plates, a cutting knife, and three sausage stuffing tubes are included with the Grinder body. This Grinder can be bolted to a table or counter top for stability.
- Make your own hamburger, sausage and bratwurst, grind rabbit, venison, pork, beef, chicken and turkey
- Grinds 4-pounds of meat per minute, secures to table or counter top
- Durable cast iron for easy cleanup
- Grinder body measures: 10-inch l x 5.25-inch w x 7-inch h, handle measures 8-inch long, unit weight: 12-pounds
- 1 cutting knife
- 2 cutting plates (1 Fine 1/4 in. and 1 Course 1/2 in.)
- 3 sausage tubes
- Sausage funnel attachment
- Simple push of innovative press-n-slide button adjusts lower jaw 2X faster than traditional groove joint pliers.
- Multi-Groove Ratcheting System has twice the groove positions than any other groove joint pliers, providing precise jaw positioning to grip any type of surface.
- Anti-pinch, non-slip ProTouch™ Grips provide comfort, control, and less hand fatigue.
- Right angle teeth grip in all directions for maximum bite.
- Metal Injection Molding (MIM) process for precision parts delivers strength and exceptional performance.
- Now available with straight, smooth, and v-shaped jaws.
- Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
Change the tires and perform standard maintenance on your vehicle at home with the help of the Black Bull Two Ton Trolley Floor Jack. The 15 inch wheel base features a 360 degree swivel saddle so you can get stable and safe contact with the load you’re lifting. Two rear 360 degree swivel ball bearing casters, and two front wheels make this Trolley Floor Jack easy to move from one wheel to the next, saving your back. The heavy gauge reinforced steel frame has a weight bearing capacity of 4,000 lbs. With a lifting height of 5 to 12 inches, the Black Bull Two Ton Trolley Floor Jack can stabilize or lift most cars, trucks, SUVs, trailers or RVs.
- Portable and easy to use, lift cars, pick-ups, RVs and SUVs up to 4,000 lbs
- Heavy gauge reinforced steel frame
- 2 rear 360 degree swivel ball bearing caster
- Lifting range 5 to 12 inches
- 15 inch base
- 360 degree swivel saddle
- Lightweight design, weighs only 14 lbs
Grind your own corn, grain, coffee beans and nuts for creating healthy, homemade meals at home with the AmeriHome Corn and Grain Grinder. Save money by pulverizing peanuts, almonds or cashews to make expensive nut butters at home. Grind freshly roasted coffee beans to make your own gourmet cup of joe. Great for milling grains for home brewing too. The Corn And Grain Grinder easily mounts to your tabletop, and the grinding plates adjust and lock into place so you can achieve the perfect grind. Constructed of cast iron to provide long lasting use.
- Make grain and cereal recipes for healthy homemade meals
- Grind peanuts and other nuts to make fresh nut butters at home
- Grind coffee beans for a delicious morning brew
- Easily mounts to your work table
- Cast iron construction provides long-lasting use
- Grinding plates adjust for a perfect grind
You can safely and easily make trail mix, jerky, dried fruits and fruit leathers without commercial sweeteners or preservatives using the AmeriHome 5-Tray Electric Food Dehydrator. Make your favorite healthy or low carb snacks at home. Electrical heating coils produce convection heat and air flow of up to 133 degrees for evenly dried food, and 5 interchangeable trays allow for faster drying times. The AmeriHome 5-Tray Electric Food Dehydrator comes with an instructional booklet contains recipes for beef jerky, turkey jerky, banana chips, apple snacks, and dried pineapple. The quiet operation and a contemporary countertop design fits well in any kitchen or home.
- Contemporary countertop design fits well in any kitchen, create healthy or low carb snacks
- Electrical heating coils produce convection air flow for evenly dried food
- Internal operating temperature of up to 133 degrees F -- quiet operation
- 5 interchangeable trays
- Instructional booklet with recipes for: beef jerky turkey jerky banana chips apple snacks dried pineapple
- Hand wash only, not recommended for dishwasher
- Round nose
- Cuts ACSR
- Laser heat-treated cutting edges last longer
- Only CHANNELLOCK® uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life
- Useful crushing area
- CHANNELLOCK® uses high-carbon C1080 steel for superior performanace on the job and electronic coating for ultimate rust prevention
- CHANNELLOCK BLUE® grips for comfort
- Improved High Leverage. Moving the rivet closer to the cutter means considerably less force required for cutting
Easily remove paint, adhesives, caulk and more with the Pro-Series 1500 Watt Heat Gun. This multi-purpose tool removes peeling paint, loosens adhesives on floor tiles, thaws frozen pipes, dries parts or strips paint. A concentrated heat output in two heat settings will help form and bend metals or plastic.
- Easily remove paint, adhesives, caulk and more
- Multi-purpose tool removes peeling paint, loosens adhesives, or thaws frozen pipes
- Concentrated heat output will help form and bend metals or plastic
- 12.5 AMP / 120 Volts / 60 Hz,
- 2 heat settings: 707 degrees f / 923 degrees F
(4) Assorted Nozzles Included:
- An air spreader nozzle
- A hook nozzle
- A deflector nozzle
- An air reduction nozzle
With a 12 Ton lifting capacity, this Bottle Jack can lift loads weighting up to 24,000 lbs. Change the tires on cars, trucks, and trailers or make repairs to your tractor, combine or hay baler. Small, portable and reliable, this is a great jack to keep nearby for emergency repairs. A cast iron base bears the load and a cleated non-slip lift cap keeps it stable. The hydraulic bypass prevents ram over travel and prevents damage to the Jack. The pump cartridge is replaceable, so you don’t have to replace the entire jack when the hydraulic has been exhausted. With a lift range of 8.5 to 13.75 inches (with the screw lift fully extended), the Black Bull Bottle Jack can get the heaviest of loads into the air and out of the way so you can make the repair and move on to other projects.
- Easily lift heavy loads weighting up to 24,000 lbs
- Reliable and portable design
- Great for use on the shop, farm, or job site
- Cleated non-slip lift cap, adjustable extension screw cap
- Replaceable pump cartridge
- Solid cast iron base for maximum stability
- Base dimensions: 5 1/4 inches x 4 3/4 inches
- Hydraulic bypass prevents ram over travel, light height 8.5 to 13.75 inches, weighs 5 lbs
This pick and screwdriver set from Titan Tools come with comfortable TRP grips, and a handy nylon storage pouch.
- Utility Picks:
- 90 Degree
- 1/4" radius
- 1/8" radius
- #000 and #00 Phillips
- 3/32" and 1/8" slotted
- Torx Drivers: