Shine more light on the problem with the Pro-Series 60 LED Rechargeable Cordless Work Light. Hang this work light from the hood when working on the car, attach it to the water heater when relighting the pilot light, or hang it from the pipes when unclogging a drain. Keep a Cordless Work Light in the truck for roadside repairs, one in the toolbox for jobs around the house, and one in the camper for night time illumination. Don’t get left in the dark. The Cordless Work Light recharges in about 2 hours with the included 120 volt wall charger and 12 volt auto charger. A built-in hook hangs easily from the hood, or a clip on magnet holds the light onto the fender. 60 LED lights are rated for 100,000 hours of working life and produce the same brightness as an 80 watt bulb. The shatterproof, waterproof, and oil resistant construction can stand up to heavy use.
- Great for cars, campers, boats, and home
- Produces the same brightness as an 80 watt bulb
- Built-in hook for hanging and clip-on magnetic holder
- Includes a 120 volt AC/DC adapter and a 12V car plug charger
- Shatterproof, waterproof, and oil resistant, LED lights are rated for 100,000 hours of working life
- Input:120V AC 60 Hz
- Output: 12V DC 450mA
The Pro-Series 115 Piece Drill Bit Set includes 115 size bits for drilling into wood, metal and plastic. Hang photos or drywall, or install shelving for storage or new hardwood floors. The drill bits are constructed of titanium for long life and high usage. Use with a cordless drill for DIY, home improvement and general maintenance projects around the house. You will find no end of uses for this Drill Bit Set. Packaged inside a storage case to keep the bits organized and easy to find.
- For general purpose drilling in metal wood and plastic
- Titanium coated
- SAE and metric size
- 29 piece fractional sizes 1/16 in. To 1/2 in., by 64th increments
- 26 piece letter sizes A to Z
- 60 piece numbered wire gauge sizes from 1 to 60
- Plastic carry case
You can safely and easily make trail mix, jerky, dried fruits and fruit leathers without commercial sweeteners or preservatives using the AmeriHome 5-Tray Electric Food Dehydrator. Make your favorite healthy or low carb snacks at home. Electrical heating coils produce convection heat and air flow of up to 133 degrees for evenly dried food, and 5 interchangeable trays allow for faster drying times. The AmeriHome 5-Tray Electric Food Dehydrator comes with an instructional booklet contains recipes for beef jerky, turkey jerky, banana chips, apple snacks, and dried pineapple. The quiet operation and a contemporary countertop design fits well in any kitchen or home.
- Contemporary countertop design fits well in any kitchen, create healthy or low carb snacks
- Electrical heating coils produce convection air flow for evenly dried food
- Internal operating temperature of up to 133 degrees F -- quiet operation
- 5 interchangeable trays
- Instructional booklet with recipes for: beef jerky turkey jerky banana chips apple snacks dried pineapple
- Hand wash only, not recommended for dishwasher
Grind your own corn, grain, coffee beans and nuts for creating healthy, homemade meals at home with the AmeriHome Corn and Grain Grinder. Save money by pulverizing peanuts, almonds or cashews to make expensive nut butters at home. Grind freshly roasted coffee beans to make your own gourmet cup of joe. Great for milling grains for home brewing too. The Corn And Grain Grinder easily mounts to your tabletop, and the grinding plates adjust and lock into place so you can achieve the perfect grind. Constructed of cast iron to provide long lasting use.
- Make grain and cereal recipes for healthy homemade meals
- Grind peanuts and other nuts to make fresh nut butters at home
- Grind coffee beans for a delicious morning brew
- Easily mounts to your work table
- Cast iron construction provides long-lasting use
- Grinding plates adjust for a perfect grind
Easily remove paint, adhesives, caulk and more with the Pro-Series 1500 Watt Heat Gun. This multi-purpose tool removes peeling paint, loosens adhesives on floor tiles, thaws frozen pipes, dries parts or strips paint. A concentrated heat output in two heat settings will help form and bend metals or plastic.
- Easily remove paint, adhesives, caulk and more
- Multi-purpose tool removes peeling paint, loosens adhesives, or thaws frozen pipes
- Concentrated heat output will help form and bend metals or plastic
- 12.5 AMP / 120 Volts / 60 Hz,
- 2 heat settings: 707 degrees f / 923 degrees F
(4) Assorted Nozzles Included:
- An air spreader nozzle
- A hook nozzle
- A deflector nozzle
- An air reduction nozzle
Process your own sausage, bratwurst and hamburgers with ease using the Sportsman Series Cast Iron Meat Grinder. Blend meat with your favorite seasonings for fresh and healthy homemade meals. Use your own casing for homemade sausage, pepperoni and bratwurst. Add your own spices and seasonings to make each recipe just the way you like it. You can even grind vegetables to prepare great tasting meals. Hand grind up to 4 pounds of rabbit, venison, pork, beef, chicken and turkey per minute. The cast iron body is durable and easy to clean. Two #22 grinding plates, a cutting knife, and three sausage stuffing tubes are included with the Grinder body. This Grinder can be bolted to a table or counter top for stability.
- Make your own hamburger, sausage and bratwurst, grind rabbit, venison, pork, beef, chicken and turkey
- Grinds 4-pounds of meat per minute, secures to table or counter top
- Durable cast iron for easy cleanup
- Grinder body measures: 10-inch l x 5.25-inch w x 7-inch h, handle measures 8-inch long, unit weight: 12-pounds
- 1 cutting knife
- 2 cutting plates (1 Fine 1/4 in. and 1 Course 1/2 in.)
- 3 sausage tubes
- Sausage funnel attachment
Build your own custom scaffold tower to fit your specific needs for home repair, maintenance and building construction. The 8 in. Heavy Duty Caster is designed for use with exterior scaffold units. Caster wheels with dual locking foot brakes, allow for easy movement across concrete and other smooth and solid surfaces. That’s a big help when you don’t have time to tear down and rebuild the scaffold. Meets OSHA and ANSI scaffolding regulations.
- For use with exterior scaffold frames
- 800 lb. load capacity
- 8 x 2 in. non-marking wheel
- 1-3/8 in. stem, 1/2 in. hole
- Dual locking with foot brake
- Each caster weighs 12.5 lbs.
- Sold individually
- Meets OSHA and ANSI scaffolding regulations
Safely retrieve hard to reach items from the back of bedroom closets and the top of kitchen cabinets by using the AmeriHome Two Step Utility Stool. Use during home maintenance and renovation projects like cleaning closets, painting, changing light bulbs, and hanging pictures. When not in use, the foldaway design and compact storage size means this Utility Stool can easily be stashed out of the way until it is needed again. Designed with safety in mind, the steps are extra wide for safety and are covered in a textured pattern that helps prevent slipping and provides secure footing. A durable powder coat finish that resists scratches and rust covers the stool’s steel frame. Constructed to meet industrial type IA standards and meets OSHA/ANSI specifications.
- Versatile utility stools can be used for hard to reach items
- Great for home maintenance projects
- Pattern on steps helps prevent slipping, provides secure footing
- Convenient foldaway design and compact storage size
- Easy grip handle locks in place when open
- Industrial type IA meets OSHA/ANSI
- Steel frame with durable powder coat finish
Weight Capacity 300 lbs Dimensions (open) 28" H x 18.5" L x 19.75" W Dimensions (folded) 30.5" H x 18.5" L x 4.5" W Platform Size 1.25" H x 15" L x 10.25" W Top Step Height 19.5" from the ground
The Pro-Series 42 Piece Rotary Tool Kit includes 40 popular and specialty accessories for decorative edging, joining and veining, shaping, grinding and polishing. The compact and lightweight design of this Rotary Tool Kit is great for hobbyist or professional woodworkers to use during home restoration, cabinet making and wood working projects. Variable speeds of 8,000 to 30,000 RPM give it the low speed needed to work on soft and delicate material and the power to handle harder pieces. Packaged inside a storage case to protect the bits from dings inside the toolbox and easy organization.
- For projects around the shop and home
- Use for decorative edging, joining and veining
- For home restoration, cabinet making and wood working projects, compact lightweight design
- Variable speeds of 8,000 to 30,000 RPM
- Durable, double-insulated, impact-resistant housing
- Accepts accessories with up to a 1/8 in. shank
- (1) Rotary tool
- (1) 42 in. flexible shaft
- 40 popular accessories