The Easy/Tran TF transfer switch is designed for the control of a single circuit, such as a forced-air furnace, in the event of a power failure. The attached 18" flexible aluminum conduit is pre-wired and allows the TF to be easily connected at the circuit breaker panel or the furnace or at any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any standby source capable of producing sufficient current to operate the desired load. Uses standard grounded extension cord.
- MODEL TF201W
- MODEL DESCRIPTION Easy/Tran
- MAX. GENERATOR RUNNING WATTS 2500
- PHASE Single
- MAX. SINGLE-POLE CIRCUITS 1
- MAX. DOUBLE-POLE CIRCUITS 0
- MAX. COMBINED LOAD @ 125 VAC 20
- 20 AMP SINGLE POLE CIRCUIT BREAKERS 1
- POWER INLET, NEMA 5-20
- RECCOMMENDED CORD SIZE [gauge] 12
- CONDUIT SIZE [inches] 1/2 Learn More
- Construction material: Steel.
- Oil free, low maintenance operation.
- Equipped with tank pressure gauge, easy access on / off switch and 0.25'' air outlet.
- Tank is lightweight and very portable.
- Centralized handle for easy lifting.
- Rubber feet stabilize compressor.
- Includes extra value kit: 300'' recoil air hose, inflation needle, 2 raft/mattress inflation nozzles, adapter fitting, ball tire chuck, quick coupler, male thread connector.
- Fully assembled, ready to use. -UL and CSA Certified. Specifications:
- Capacity: 1 Gallon.
- Maximum pressure: 100 PSI.
- Voltage: 120V.
- Dimensions: 14.33'' H x 11.81'' W x 12.8'' D.
- Monitors homes, condos, cottages, outbuildings, cabins, businesses etc. Automatically calls up to three different phone numbers of your choice in the event of:
- Power failure
- Freezing conditions
- Water leakage or flooding
- Connects to existing telephone lines.
- Freeze warning activates at 45º F.
- Installs in minutes-no special wiring required.
- Selectable 5 or 30 minute initial call-out delay.
- Continues calling for up to 10 hours if needed.
- Clear voice message identifies problem.
- 9v battery backup included. Learn More
The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and Panel/Link manual transfer panels and generator-ready load centers. This power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the three ¾-inch knockouts (one each on the sides and back) the power inlet box can be wired directly to the transfer switch or panel. The patented design provides over 100 cubic inches of wiring space and the slide-out base allows easy 360o access to the flanged inlet. UL listed.Learn More
Keep the handy Pro-Series Folding Platform Truck close at hand to make moving bulky loads easy and safely. With a 330 lbs load capacity, the Folding Platform Dolly will move paper boxes at the office and bulk groceries from the warehouse club. Keep one in the garage for weekend projects around the house, in the car for hauling large purchases into the house, or at the office to help make stocking supplies easier. The handle on this handy Folding Cart easily folds flat against the platform, creating a slim profile, just 9 inches, for easy storage. The 29 x 19 inch platform surface is covered with textured non-skid rubber cover to help keep the load from falling off while moving. A rubber bumper around the edge of the cart will help keep the wall and door jams from being damaged if bumped. Four heavy-duty 4 inch caster wheels, 2 that swivel, and 2 stationary, make steering easy and stable. Small but mighty, keep this handy Folding Platform Truck nearby to make moving bulky loads easy and safely.
- Great for use at the office, warehouse club, or around the house
- Easily and safely move supplies and bulky items
- Handle folds down for easy storage, Rubber bumper helps to prevent damage
- Roomy 19 x 29 inch platform hold up to 330 lbs, non-slip surface keep loads stable and in place
- Heavy-duty 4-inch caster wheels make steering smooth and easy
The economical air hammer for fast cutting action, especially for medium exhaust system, panel cutting, and general repair work.
- Includes 3 piece chisel set
- Quick change chisel retainer
- Longer life alloyed steel barrel and heat-treated piston
- Diffused handle exhaust
- Ergonomic grip
Maintenance kits are designed, manufactured and tested specifically for your generator's needs to help deliver optimum performance. Popular maintenance products are included in on kit for quick and easy servicing.
- Air filter
- 2 spark plugs
- Oil filter