Tool Boxes & Cabinets and Benches
Nissan NV mounting kit for the EZ-Glide System.Learn More
- 3/8-in heavy-duty aluminum hinge
- Wide, surround rain gutter with auto-style bulb weather stripping Three-point locking system
- Reinforced high-strength door provides superior strength and security
- Commercial rotating T-handle
- Aircraft cable door supports
- Heavy-duty EPDM closed cell bulb weather stripping surrounds door opening to seal out moisture
- Reinforcing cross-hatch pattern Learn More
This heavy-duty Northern Tool + Equipment in-frame truck box is designed for mounting between the frame and truck rails to provide low-profile access for storage of heavy chains, binders and tie-down straps. Features rugged 0.100 diamond plate aluminum construction. U.S.A. Application: To provide low-profile access for storage of heavy chains, binders and tie-down straps, Dimensions L x W x H (in.): 24 x 18 x 8, Handle Type: Padlock style, Finish Type: Smooth body aluminum finish with diamond plate open lid, Mount Type: Between frame and truck rails Padlock loopLearn More
Delta SteelTransfer tanks are designed for the toughest conditions. Made of heavy-duty .125 tread plate steel, the tanks have internal baffles for reinforcing and controlling the flow of the contents when moving. All tanks are pressure tested for leaks.
- All tanks are pressure tested for leaks.
- 2-in reinforced bungs allow convenient use from either side.
- Filter system recommended.
- Built-in lifting rings to assist with lifting and moving an empty tank.
- Lockable filler cap and coupler prevent excessive pressure build up.
- Heavy-duty brackets to secure the tank to the truck bed.
- All brackets must be bolted to the truck bed.
- Safety Fill Capacity: 103 Gallons
- Maximum Fill Capacity: 109 Gallons
- L-shaped tanks are designed to accommodate our full-size crossbed boxes
- Not intended for transferring gasoline or other flammables, and should not be used as an auxiliary fuel tank
- Does not meet DOT specifications
- Lockable Vent Caps
- Base mounting tabs
- Baffles provide an even flow of liquid
- Available in several sizes: 30" up to 60"
- Available in Bright or Black finish
- .100 gauge aluminum
- Paints are electrostatically applied to maximize resistance to abrasion and corrosion
Dee Zee Tool Box - Hardware Series Double Lid (Gull Wing) Crossover. Constructed of heavy duty steel. Protected by wrinkle white NRT (No Rust Technology) rust inhibitor powder coat finish. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
- HARDware Series - Gull Wing Tool Box
- 20-Gauge Steel Construction
- Texture White Powder Coat Finish
- NRT Powder Coat Is A Specially Designed To Increase Corrosion Protection
- Lockable Stainless Steel Paddle Handle Latches
- Double V-Pan Lid Stiffener Creates Strength And Rigidity
- Internal Bends Add Superior Body Strength
- Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
- Dampened Gas Shocks Open At A Steady, Controlled Rate
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- L: 69.75" x W: 20" x H: 12.2" ; Vol: 8.4 cu. ft.
- L-1: 60.75"; W-1: 17.125"; W-2: 1.44"; H-1: 5"; H-2: 7.2"
- Made In USA
- Limited-Lifetime Warranty
Chest Box; Wedge; L 48 in. x W 20 in. x H 17.25 in. Designed To Fit Against Back Of Cab. Stainless Steel Lock Handles For Strength/Security. Aluminum Lid Supports Heavy Loads. Self Closing Struts. MicroSeal Stripping Seals Out Moisture. Lid Opens 90 Degree For Easy Loading. Aluminum One Piece Tub and Lid. Patented Fully Foamed Lid.Learn More
Weight (lbs.): 52
- Maximum load capacity 250 lbs.
- Load bar is adjustable to accommodate the varied widths of ladders.
- Uprights remove easily from the truck for a night out on the weekend and can be easily reinstalled for the work week ahead.
Delta PRO Steel Innersides utilize the same Gear-Lock system, self-centering latch pin, reinforced lid and high-strength body Design as the Crossovers. They mount on the top of the bed side walls and are ideal for storing longer tools and equipment. Innersides help keep the bed free for storing bulky items. Combine Innersides with a Crossover to create a wrap-around storage system.
- Gear-Lock dual rotary locking system operates like a ratchet to lock the lid down tighter
- Self-aligning latch pin pivots from side-to-side to engage with the Gear-Lock System; no adjustments required
- 3-Layer Laminated RSL Rigid Structural Lid has a reverse beveled edge liner and an inner layer of rigid foam insulation to create the most rigid, strongest aluminum lid we've tested
- Reinforced high-strength body resists cargo damage and protects lock system
- Heavy-duty, reliable Posi-Lift gas springs automatically opens the lid for easier, faster access
- Full-length storage bin provides quick and easy access to hand tools and parts
- Full weather stripping creates a tight seal against moisture and dust
- Built-in full-length storage compartment for small tools and parts
- All models available with diamond black finish Learn More